*/
#define BRCMF_IDLE_INTERVAL 1
+#define KSO_WAIT_US 50
+#define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US)
+
/*
* Conversion of 802.1D priority to precedence level
*/
bool txoff; /* Transmit flow-controlled */
struct brcmf_sdio_count sdcnt;
+ bool sr_enabled; /* SaveRestore enabled */
+ bool sleeping; /* SDIO bus sleeping */
};
/* clkstate */
#define CLK_NONE 0
#define CLK_SDONLY 1
-#define CLK_PENDING 2 /* Not used yet */
+#define CLK_PENDING 2
#define CLK_AVAIL 3
#ifdef DEBUG
return ret;
}
+static int
+brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on)
+{
+ u8 wr_val = 0, rd_val, cmp_val, bmask;
+ int err = 0;
+ int try_cnt = 0;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
+ /* 1st KSO write goes to AOS wake up core if device is asleep */
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ wr_val, &err);
+ if (err) {
+ brcmf_err("SDIO_AOS KSO write error: %d\n", err);
+ return err;
+ }
+
+ if (on) {
+ /* device WAKEUP through KSO:
+ * write bit 0 & read back until
+ * both bits 0 (kso bit) & 1 (dev on status) are set
+ */
+ cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK |
+ SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK;
+ bmask = cmp_val;
+ usleep_range(2000, 3000);
+ } else {
+ /* Put device to sleep, turn off KSO */
+ cmp_val = 0;
+ /* only check for bit0, bit1(dev on status) may not
+ * get cleared right away
+ */
+ bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK;
+ }
+
+ do {
+ /* reliable KSO bit set/clr:
+ * the sdiod sleep write access is synced to PMU 32khz clk
+ * just one write attempt may fail,
+ * read it back until it matches written value
+ */
+ rd_val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ &err);
+ if (((rd_val & bmask) == cmp_val) && !err)
+ break;
+ brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n",
+ try_cnt, MAX_KSO_ATTEMPTS, err);
+ udelay(KSO_WAIT_US);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ wr_val, &err);
+ } while (try_cnt++ < MAX_KSO_ATTEMPTS);
+
+ return err;
+}
+
#define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND)
#define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE)
clkctl = 0;
+ if (bus->sr_enabled) {
+ bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY);
+ return 0;
+ }
+
if (on) {
/* Request HT Avail */
clkreq =
return 0;
}
+static int
+brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
+{
+ int err = 0;
+ brcmf_dbg(TRACE, "Enter\n");
+ brcmf_dbg(SDIO, "request %s currently %s\n",
+ (sleep ? "SLEEP" : "WAKE"),
+ (bus->sleeping ? "SLEEP" : "WAKE"));
+
+ /* If SR is enabled control bus state with KSO */
+ if (bus->sr_enabled) {
+ /* Done if we're already in the requested state */
+ if (sleep == bus->sleeping)
+ goto end;
+
+ /* Going to sleep */
+ if (sleep) {
+ /* Don't sleep if something is pending */
+ if (atomic_read(&bus->intstatus) ||
+ atomic_read(&bus->ipend) > 0 ||
+ (!atomic_read(&bus->fcstate) &&
+ brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
+ data_ok(bus)))
+ return -EBUSY;
+ err = brcmf_sdbrcm_kso_control(bus, false);
+ /* disable watchdog */
+ if (!err)
+ brcmf_sdbrcm_wd_timer(bus, 0);
+ } else {
+ bus->idlecount = 0;
+ err = brcmf_sdbrcm_kso_control(bus, true);
+ }
+ if (!err) {
+ /* Change state */
+ bus->sleeping = sleep;
+ brcmf_dbg(SDIO, "new state %s\n",
+ (sleep ? "SLEEP" : "WAKE"));
+ } else {
+ brcmf_err("error while changing bus sleep state %d\n",
+ err);
+ return err;
+ }
+ }
+
+end:
+ /* control clocks */
+ if (sleep) {
+ if (!bus->sr_enabled)
+ brcmf_sdbrcm_clkctl(bus, CLK_NONE, pendok);
+ } else {
+ brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, pendok);
+ }
+
+ return err;
+
+}
+
static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
{
u32 intstatus = 0;
sdio_claim_host(bus->sdiodev->func[1]);
/* Enable clock for device interrupts */
- brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
+ brcmf_sdbrcm_bus_sleep(bus, false, false);
/* Disable and clear interrupts at the chip level also */
w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
sdio_claim_host(bus->sdiodev->func[1]);
/* If waiting for HTAVAIL, check status */
- if (bus->clkstate == CLK_PENDING) {
+ if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) {
u8 clkctl, devctl = 0;
#ifdef DEBUG
}
/* Make sure backplane clock is on */
- brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true);
+ brcmf_sdbrcm_bus_sleep(bus, false, true);
/* Pending interrupt indicates new device status */
if (atomic_read(&bus->ipend) > 0) {
if ((bus->clkstate != CLK_PENDING)
&& bus->idletime == BRCMF_IDLE_IMMEDIATE) {
bus->activity = false;
+ brcmf_dbg(SDIO, "idle state\n");
sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
+ brcmf_sdbrcm_bus_sleep(bus, true, false);
sdio_release_host(bus->sdiodev->func[1]);
}
}
/* Make sure backplane clock is on */
sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
+ brcmf_sdbrcm_bus_sleep(bus, false, false);
sdio_release_host(bus->sdiodev->func[1]);
/* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
bus->activity = false;
sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_dbg(INFO, "idle\n");
brcmf_sdbrcm_clkctl(bus, CLK_NONE, true);
sdio_release_host(bus->sdiodev->func[1]);
} else {
* address of sdpcm_shared structure
*/
sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
+ brcmf_sdbrcm_bus_sleep(bus, false, false);
rv = brcmf_sdbrcm_membytes(bus, false, shaddr,
(u8 *)&addr_le, 4);
sdio_release_host(bus->sdiodev->func[1]);
return bcmerror;
}
+static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus)
+{
+ u32 addr, reg;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ /* old chips with PMU version less than 17 don't support save restore */
+ if (bus->ci->pmurev < 17)
+ return false;
+
+ /* read PMU chipcontrol register 3*/
+ addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr);
+ brcmf_sdio_regwl(bus->sdiodev, addr, 3, NULL);
+ addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data);
+ reg = brcmf_sdio_regrl(bus->sdiodev, addr, NULL);
+
+ return (bool)reg;
+}
+
+static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus)
+{
+ int err = 0;
+ u8 val;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL,
+ &err);
+ if (err) {
+ brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
+ return;
+ }
+
+ val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL,
+ val, &err);
+ if (err) {
+ brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
+ return;
+ }
+
+ /* Add CMD14 Support */
+ brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
+ (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
+ SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
+ &err);
+ if (err) {
+ brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
+ return;
+ }
+
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ SBSDIO_FORCE_HT, &err);
+ if (err) {
+ brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
+ return;
+ }
+
+ /* set flag */
+ bus->sr_enabled = true;
+ brcmf_dbg(INFO, "SR enabled\n");
+}
+
+/* enable KSO bit */
+static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus)
+{
+ u8 val;
+ int err = 0;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ /* KSO bit added in SDIO core rev 12 */
+ if (bus->ci->c_inf[1].rev < 12)
+ return 0;
+
+ val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ &err);
+ if (err) {
+ brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
+ return err;
+ }
+
+ if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
+ val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
+ SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ val, &err);
+ if (err) {
+ brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+
static bool
brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
{
ret = -ENODEV;
}
- /* Restore previous clock setting */
- brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
+ if (brcmf_sdbrcm_sr_capable(bus)) {
+ brcmf_sdbrcm_sr_init(bus);
+ } else {
+ /* Restore previous clock setting */
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ saveclk, &err);
+ }
if (ret == 0) {
ret = brcmf_sdio_intr_register(bus->sdiodev);
brcmf_dbg(TIMER, "Enter\n");
/* Poll period: check device if appropriate. */
- if (bus->poll && (++bus->polltick >= bus->pollrate)) {
+ if (!bus->sr_enabled &&
+ bus->poll && (++bus->polltick >= bus->pollrate)) {
u32 intstatus = 0;
/* Reset poll tick */
bus->console.count -= bus->console_interval;
sdio_claim_host(bus->sdiodev->func[1]);
/* Make sure backplane clock is on */
- brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
+ brcmf_sdbrcm_bus_sleep(bus, false, false);
if (brcmf_sdbrcm_readconsole(bus) < 0)
/* stop on error */
bus->console_interval = 0;
bus->activity = false;
brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
} else {
+ brcmf_dbg(SDIO, "idle\n");
sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
+ brcmf_sdbrcm_bus_sleep(bus, true, false);
sdio_release_host(bus->sdiodev->func[1]);
}
}
goto fail;
}
+ if (brcmf_sdbrcm_kso_init(bus)) {
+ brcmf_err("error enabling KSO\n");
+ goto fail;
+ }
+
brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci,
SDIO_DRIVE_STRENGTH);
bus->use_rxchain = false;
bus->sd_rxchain = false;
+ /* SR state */
+ bus->sleeping = false;
+ bus->sr_enabled = false;
+
return true;
}
projects / openwrt / staging / blogic.git / commitdiff