#include <asm/div64.h>
#include <asm/smp.h>
#include <asm/vdso_datapage.h>
-#ifdef CONFIG_PPC64
#include <asm/firmware.h>
-#endif
#ifdef CONFIG_PPC_ISERIES
#include <asm/iseries/it_lp_queue.h>
#include <asm/iseries/hv_call_xm.h>
#endif
+/* powerpc clocksource/clockevent code */
+
+#include <linux/clocksource.h>
+
+static cycle_t rtc_read(void);
+static struct clocksource clocksource_rtc = {
+ .name = "rtc",
+ .rating = 400,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .mask = CLOCKSOURCE_MASK(64),
+ .shift = 22,
+ .mult = 0, /* To be filled in */
+ .read = rtc_read,
+};
+
+static cycle_t timebase_read(void);
+static struct clocksource clocksource_timebase = {
+ .name = "timebase",
+ .rating = 400,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .mask = CLOCKSOURCE_MASK(64),
+ .shift = 22,
+ .mult = 0, /* To be filled in */
+ .read = timebase_read,
+};
+
#ifdef CONFIG_PPC_ISERIES
static unsigned long __initdata iSeries_recal_titan;
static signed long __initdata iSeries_recal_tb;
+
+/* Forward declaration is only needed for iSereis compiles */
+void __init clocksource_init(void);
#endif
#define XSEC_PER_SEC (1024*1024)
}
EXPORT_SYMBOL(udelay);
-/*
- * This version of gettimeofday has microsecond resolution.
- */
-static inline void __do_gettimeofday(struct timeval *tv)
-{
- unsigned long sec, usec;
- u64 tb_ticks, xsec;
- struct gettimeofday_vars *temp_varp;
- u64 temp_tb_to_xs, temp_stamp_xsec;
-
- /*
- * These calculations are faster (gets rid of divides)
- * if done in units of 1/2^20 rather than microseconds.
- * The conversion to microseconds at the end is done
- * without a divide (and in fact, without a multiply)
- */
- temp_varp = do_gtod.varp;
-
- /* Sampling the time base must be done after loading
- * do_gtod.varp in order to avoid racing with update_gtod.
- */
- data_barrier(temp_varp);
- tb_ticks = get_tb() - temp_varp->tb_orig_stamp;
- temp_tb_to_xs = temp_varp->tb_to_xs;
- temp_stamp_xsec = temp_varp->stamp_xsec;
- xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
- sec = xsec / XSEC_PER_SEC;
- usec = (unsigned long)xsec & (XSEC_PER_SEC - 1);
- usec = SCALE_XSEC(usec, 1000000);
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
- if (__USE_RTC()) {
- /* do this the old way */
- unsigned long flags, seq;
- unsigned int sec, nsec, usec;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- sec = xtime.tv_sec;
- nsec = xtime.tv_nsec + tb_ticks_since(tb_last_jiffy);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
- usec = nsec / 1000;
- while (usec >= 1000000) {
- usec -= 1000000;
- ++sec;
- }
- tv->tv_sec = sec;
- tv->tv_usec = usec;
- return;
- }
- __do_gettimeofday(tv);
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
/*
* There are two copies of tb_to_xs and stamp_xsec so that no
++(vdso_data->tb_update_count);
}
-/*
- * When the timebase - tb_orig_stamp gets too big, we do a manipulation
- * between tb_orig_stamp and stamp_xsec. The goal here is to keep the
- * difference tb - tb_orig_stamp small enough to always fit inside a
- * 32 bits number. This is a requirement of our fast 32 bits userland
- * implementation in the vdso. If we "miss" a call to this function
- * (interrupt latency, CPU locked in a spinlock, ...) and we end up
- * with a too big difference, then the vdso will fallback to calling
- * the syscall
- */
-static __inline__ void timer_recalc_offset(u64 cur_tb)
-{
- unsigned long offset;
- u64 new_stamp_xsec;
- u64 tlen, t2x;
- u64 tb, xsec_old, xsec_new;
- struct gettimeofday_vars *varp;
-
- if (__USE_RTC())
- return;
- tlen = current_tick_length();
- offset = cur_tb - do_gtod.varp->tb_orig_stamp;
- if (tlen == last_tick_len && offset < 0x80000000u)
- return;
- if (tlen != last_tick_len) {
- t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs);
- last_tick_len = tlen;
- } else
- t2x = do_gtod.varp->tb_to_xs;
- new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
- do_div(new_stamp_xsec, 1000000000);
- new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
-
- ++vdso_data->tb_update_count;
- smp_mb();
-
- /*
- * Make sure time doesn't go backwards for userspace gettimeofday.
- */
- tb = get_tb();
- varp = do_gtod.varp;
- xsec_old = mulhdu(tb - varp->tb_orig_stamp, varp->tb_to_xs)
- + varp->stamp_xsec;
- xsec_new = mulhdu(tb - cur_tb, t2x) + new_stamp_xsec;
- if (xsec_new < xsec_old)
- new_stamp_xsec += xsec_old - xsec_new;
-
- update_gtod(cur_tb, new_stamp_xsec, t2x);
-}
-
#ifdef CONFIG_SMP
unsigned long profile_pc(struct pt_regs *regs)
{
iSeries_recal_titan = titan;
iSeries_recal_tb = tb;
+ /* Called here as now we know accurate values for the timebase */
+ clocksource_init();
return 0;
}
late_initcall(iSeries_tb_recal);
if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
tb_last_jiffy = tb_next_jiffy;
do_timer(1);
- timer_recalc_offset(tb_last_jiffy);
}
write_sequnlock(&xtime_lock);
}
return mulhdu(get_tb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift;
}
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, new_sec = tv->tv_sec;
- long wtm_nsec, new_nsec = tv->tv_nsec;
- unsigned long flags;
- u64 new_xsec;
- unsigned long tb_delta;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- /*
- * Updating the RTC is not the job of this code. If the time is
- * stepped under NTP, the RTC will be updated after STA_UNSYNC
- * is cleared. Tools like clock/hwclock either copy the RTC
- * to the system time, in which case there is no point in writing
- * to the RTC again, or write to the RTC but then they don't call
- * settimeofday to perform this operation.
- */
-
- /* Make userspace gettimeofday spin until we're done. */
- ++vdso_data->tb_update_count;
- smp_mb();
-
- /*
- * Subtract off the number of nanoseconds since the
- * beginning of the last tick.
- */
- tb_delta = tb_ticks_since(tb_last_jiffy);
- tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */
- new_nsec -= SCALE_XSEC(tb_delta, 1000000000);
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
-
- set_normalized_timespec(&xtime, new_sec, new_nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
-
- new_xsec = xtime.tv_nsec;
- if (new_xsec != 0) {
- new_xsec *= XSEC_PER_SEC;
- do_div(new_xsec, NSEC_PER_SEC);
- }
- new_xsec += (u64)xtime.tv_sec * XSEC_PER_SEC;
- update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs);
-
- vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
- vdso_data->tz_dsttime = sys_tz.tz_dsttime;
-
- write_sequnlock_irqrestore(&xtime_lock, flags);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
static int __init get_freq(char *name, int cells, unsigned long *val)
{
struct device_node *cpu;
tm.tm_hour, tm.tm_min, tm.tm_sec);
}
+/* clocksource code */
+static cycle_t rtc_read(void)
+{
+ return (cycle_t)get_rtc();
+}
+
+static cycle_t timebase_read(void)
+{
+ return (cycle_t)get_tb();
+}
+
+void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
+{
+ u64 t2x, stamp_xsec;
+
+ if (clock != &clocksource_timebase)
+ return;
+
+ /* Make userspace gettimeofday spin until we're done. */
+ ++vdso_data->tb_update_count;
+ smp_mb();
+
+ /* XXX this assumes clock->shift == 22 */
+ /* 4611686018 ~= 2^(20+64-22) / 1e9 */
+ t2x = (u64) clock->mult * 4611686018ULL;
+ stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
+ do_div(stamp_xsec, 1000000000);
+ stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+ update_gtod(clock->cycle_last, stamp_xsec, t2x);
+}
+
+void update_vsyscall_tz(void)
+{
+ /* Make userspace gettimeofday spin until we're done. */
+ ++vdso_data->tb_update_count;
+ smp_mb();
+ vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
+ vdso_data->tz_dsttime = sys_tz.tz_dsttime;
+ smp_mb();
+ ++vdso_data->tb_update_count;
+}
+
+void __init clocksource_init(void)
+{
+ struct clocksource *clock;
+
+ if (__USE_RTC())
+ clock = &clocksource_rtc;
+ else
+ clock = &clocksource_timebase;
+
+ clock->mult = clocksource_hz2mult(tb_ticks_per_sec, clock->shift);
+
+ if (clocksource_register(clock)) {
+ printk(KERN_ERR "clocksource: %s is already registered\n",
+ clock->name);
+ return;
+ }
+
+ printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
+ clock->name, clock->mult, clock->shift);
+}
+
/* This function is only called on the boot processor */
void __init time_init(void)
{
write_sequnlock_irqrestore(&xtime_lock, flags);
+ /* Register the clocksource, if we're not running on iSeries */
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ clocksource_init();
+
/* Not exact, but the timer interrupt takes care of this */
set_dec(tb_ticks_per_jiffy);
}
projects / openwrt / staging / blogic.git / commitdiff