regulators: max8660: use i2c_id->driver_data rather than ->name

Introduce an enum and denote the device type via struct i2c_id's
driver_data field rather than comparing strings.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index bfd41084c7dfd8a96ea23e9587434cca78cb9f52..5a734fc9618c0ba31231c76a9ec13a6088893fb8 100644 (file)
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -305,6 +305,11 @@ static const struct regulator_desc max8660_reg[] = {
        },
 };
 
+enum {
+       MAX8660 = 0,
+       MAX8661 = 1,
+};
+
 static int max8660_probe(struct i2c_client *client,
                                   const struct i2c_device_id *i2c_id)
 {
@@ -313,6 +318,7 @@ static int max8660_probe(struct i2c_client *client,
        struct regulator_config config = { };
        struct max8660 *max8660;
        int boot_on, i, id, ret = -EINVAL;
+       unsigned int type;
 
        if (pdata->num_subdevs > MAX8660_V_END) {
                dev_err(&client->dev, "Too many regulators found!\n");
@@ -327,6 +333,7 @@ static int max8660_probe(struct i2c_client *client,
 
        max8660->client = client;
        rdev = max8660->rdev;
+       type = i2c_id->driver_data;
 
        if (pdata->en34_is_high) {
                /* Simulate always on */
@@ -376,7 +383,7 @@ static int max8660_probe(struct i2c_client *client,
                        break;
 
                case MAX8660_V7:
-                       if (!strcmp(i2c_id->name, "max8661")) {
+                       if (type == MAX8661) {
                                dev_err(&client->dev, "Regulator not on this chip!\n");
                                goto err_out;
                        }
@@ -431,8 +438,8 @@ static int max8660_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id max8660_id[] = {
-       { "max8660", 0 },
-       { "max8661", 0 },
+       { .name = "max8660", .driver_data = MAX8660 },
+       { .name = "max8661", .driver_data = MAX8661 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, max8660_id);