thermal: tsens: qcom: do not create duplicate regmap debugfs entries

Regmap would use device name to create debugfs entries. If the device
has multiple regmaps it is recommended to use name field in regmap_config.
Fix this by providing name to the regmap configs correctly.

Without this patch we would see below error on DB820c.

qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor
debugfs directory

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 3be4be2e046598a494e48c41392c89913ff3ce70..78652cac7f3df2882ae2bf5d07afa510c6ec248d 100644 (file)
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -114,6 +114,14 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 }
 
 static const struct regmap_config tsens_config = {
+       .name           = "tm",
+       .reg_bits       = 32,
+       .val_bits       = 32,
+       .reg_stride     = 4,
+};
+
+static const struct regmap_config tsens_srot_config = {
+       .name           = "srot",
        .reg_bits       = 32,
        .val_bits       = 32,
        .reg_stride     = 4,
@@ -139,8 +147,8 @@ int __init init_common(struct tsens_device *tmdev)
                if (IS_ERR(srot_base))
                        return PTR_ERR(srot_base);
 
-               tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev,
-                                                       srot_base, &tsens_config);
+               tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev, srot_base,
+                                                       &tsens_srot_config);
                if (IS_ERR(tmdev->srot_map))
                        return PTR_ERR(tmdev->srot_map);