net: phy: phylink: Report MoCA as PORT_BNC

Similarly to what PHYLIB already does, make sure that
PHY_INTERFACE_MODE_MOCA is reported as PORT_BNC.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1acdda69b3c65802a5d604680a11a3294b70468e..c89b8c63f16a070ad2e79543ac50abe08f6fc691 100644 (file)
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -556,7 +556,10 @@ struct phylink *phylink_create(struct net_device *ndev,
        pl->netdev = ndev;
        pl->phy_state.interface = iface;
        pl->link_interface = iface;
-       pl->link_port = PORT_MII;
+       if (iface == PHY_INTERFACE_MODE_MOCA)
+               pl->link_port = PORT_BNC;
+       else
+               pl->link_port = PORT_MII;
        pl->link_config.interface = iface;
        pl->link_config.pause = MLO_PAUSE_AN;
        pl->link_config.speed = SPEED_UNKNOWN;