if (inb(AD1816A_REG(AD1816A_CHIP_STATUS)) & AD1816A_READY)
return 0;
- snd_printk("chip busy.\n");
+ snd_printk(KERN_WARNING "chip busy.\n");
return -EBUSY;
}
spin_unlock(&chip->lock);
break;
default:
- snd_printk("invalid trigger mode 0x%x.\n", what);
+ snd_printk(KERN_WARNING "invalid trigger mode 0x%x.\n", what);
error = -EINVAL;
}
case AD1816A_HW_AD1815: return "AD1815";
case AD1816A_HW_AD18MAX10: return "AD18max10";
default:
- snd_printk("Unknown chip version %d:%d.\n",
+ snd_printk(KERN_WARNING "Unknown chip version %d:%d.\n",
chip->version, chip->hardware);
return "AD1816A - unknown";
}
if (hardware == WSS_HW_DETECT)
hardware = WSS_HW_DETECT3;
if (cport < 0x100) {
- snd_printk("please, specify control port for CS4236+ chips\n");
+ snd_printk(KERN_ERR "please, specify control port "
+ "for CS4236+ chips\n");
return -ENODEV;
}
err = snd_wss_create(card, port, cport,
return err;
if (!(chip->hardware & WSS_HW_CS4236B_MASK)) {
- snd_printk("CS4236+: MODE3 and extended registers not available, hardware=0x%x\n",chip->hardware);
+ snd_printk(KERN_ERR "CS4236+: MODE3 and extended registers "
+ "not available, hardware=0x%x\n", chip->hardware);
snd_device_free(card, chip);
return -ENODEV;
}
{
int idx;
for (idx = 0; idx < 8; idx++)
- snd_printk("CD%i = 0x%x\n", idx, inb(chip->cport + idx));
+ snd_printk(KERN_DEBUG "CD%i = 0x%x\n",
+ idx, inb(chip->cport + idx));
for (idx = 0; idx < 9; idx++)
- snd_printk("C%i = 0x%x\n", idx, snd_cs4236_ctrl_in(chip, idx));
+ snd_printk(KERN_DEBUG "C%i = 0x%x\n",
+ idx, snd_cs4236_ctrl_in(chip, idx));
}
#endif
ver1 = snd_cs4236_ctrl_in(chip, 1);
ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION);
snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n", cport, ver1, ver2);
if (ver1 != ver2) {
- snd_printk("CS4236+ chip detected, but control port 0x%lx is not valid\n", cport);
+ snd_printk(KERN_ERR "CS4236+ chip detected, but "
+ "control port 0x%lx is not valid\n", cport);
snd_device_free(card, chip);
return -ENODEV;
}
spin_lock_irqsave(&chip->reg_lock, flags);
ucontrol->value.integer.value[0] = chip->image[CS4231_ALT_FEATURE_1] & 0x02 ? 1 : 0;
#if 0
- printk("get valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
+ printk(KERN_DEBUG "get valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, "
+ "C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
snd_wss_in(chip, CS4231_ALT_FEATURE_1),
snd_cs4236_ctrl_in(chip, 3),
snd_cs4236_ctrl_in(chip, 4),
mutex_unlock(&chip->mce_mutex);
#if 0
- printk("set valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
+ printk(KERN_DEBUG "set valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, "
+ "C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
snd_wss_in(chip, CS4231_ALT_FEATURE_1),
snd_cs4236_ctrl_in(chip, 3),
snd_cs4236_ctrl_in(chip, 4),
return 1;
}
#ifdef CONFIG_SND_DEBUG
- printk("snd_es1688_dsp_command: timeout (0x%x)\n", val);
+ printk(KERN_DEBUG "snd_es1688_dsp_command: timeout (0x%x)\n", val);
#endif
return 0;
}
hw = ES1688_HW_AUTO;
switch (chip->version & 0xfff0) {
case 0x4880:
- snd_printk("[0x%lx] ESS: AudioDrive ES488 detected, but driver is in another place\n", chip->port);
+ snd_printk(KERN_ERR "[0x%lx] ESS: AudioDrive ES488 detected, "
+ "but driver is in another place\n", chip->port);
return -ENODEV;
case 0x6880:
hw = (chip->version & 0x0f) >= 8 ? ES1688_HW_1688 : ES1688_HW_688;
break;
default:
- snd_printk("[0x%lx] ESS: unknown AudioDrive chip with version 0x%x (Jazz16 soundcard?)\n", chip->port, chip->version);
+ snd_printk(KERN_ERR "[0x%lx] ESS: unknown AudioDrive chip "
+ "with version 0x%x (Jazz16 soundcard?)\n",
+ chip->port, chip->version);
return -ENODEV;
}
}
}
#if 0
- snd_printk("mpu cfg = 0x%x\n", cfg);
+ snd_printk(KERN_DEBUG "mpu cfg = 0x%x\n", cfg);
#endif
spin_lock_irqsave(&chip->reg_lock, flags);
snd_es1688_mixer_write(chip, 0x40, cfg);
cfg = 0xf0; /* enable only DMA counter interrupt */
irq_bits = irqs[chip->irq & 0x0f];
if (irq_bits < 0) {
- snd_printk("[0x%lx] ESS: bad IRQ %d for ES1688 chip!!\n", chip->port, chip->irq);
+ snd_printk(KERN_ERR "[0x%lx] ESS: bad IRQ %d "
+ "for ES1688 chip!!\n",
+ chip->port, chip->irq);
#if 0
irq_bits = 0;
cfg = 0x10;
cfg = 0xf0; /* extended mode DMA enable */
dma = chip->dma8;
if (dma > 3 || dma == 2) {
- snd_printk("[0x%lx] ESS: bad DMA channel %d for ES1688 chip!!\n", chip->port, dma);
+ snd_printk(KERN_ERR "[0x%lx] ESS: bad DMA channel %d "
+ "for ES1688 chip!!\n", chip->port, dma);
#if 0
dma_bits = 0;
cfg = 0x00; /* disable all DMA */
return -EINVAL; /* something is wrong */
}
#if 0
- printk("trigger: val = 0x%x, value = 0x%x\n", val, value);
- printk("trigger: pointer = 0x%x\n", snd_dma_pointer(chip->dma8, chip->dma_size));
+ printk(KERN_DEBUG "trigger: val = 0x%x, value = 0x%x\n", val, value);
+ printk(KERN_DEBUG "trigger: pointer = 0x%x\n",
+ snd_dma_pointer(chip->dma8, chip->dma_size));
#endif
snd_es1688_write(chip, 0xb8, (val & 0xf0) | value);
spin_unlock(&chip->reg_lock);
unsigned char result;
#if 0
outb(0x1d, port); /* password */
- printk("read [0x%lx] = 0x%x\n", port, inb(port));
+ printk(KERN_DEBUG "read [0x%lx] = 0x%x\n", port, inb(port));
#endif
outb(reg, chip->port); /* register */
result = inb(chip->port + 1);
#if 0
- printk("read [0x%lx] = 0x%x [0x%x]\n", port, result, inb(port));
+ printk(KERN_DEBUG "read [0x%lx] = 0x%x [0x%x]\n",
+ port, result, inb(port));
#endif
return result;
}
snd_printk(KERN_ERR PFX "can't grab port 0x%lx\n", port);
return -EBUSY;
}
- // snd_printk("REG 0A = 0x%x\n", snd_opl3sa2_read(chip, 0x0a));
+ /*
+ snd_printk(KERN_DEBUG "REG 0A = 0x%x\n",
+ snd_opl3sa2_read(chip, 0x0a));
+ */
chip->version = 0;
tmp = snd_opl3sa2_read(chip, OPL3SA2_MISC);
if (tmp == 0xff) {
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", hardware);
return -ENODEV;
}
return 0;
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", chip->hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
}
spin_unlock_irqrestore(&chip->lock, flags);
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", chip->hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
}
spin_unlock_irqrestore(&chip->lock, flags);
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", chip->hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
return -EINVAL;
}
wss_base_bits = 0x02;
break;
default:
- snd_printk("WSS port 0x%lx not valid\n", chip->wss_base);
+ snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n",
+ chip->wss_base);
goto __skip_base;
}
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
irq_bits = 0x04;
break;
default:
- snd_printk("WSS irq # %d not valid\n", chip->irq);
+ snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq);
goto __skip_resources;
}
dma_bits = 0x03;
break;
default:
- snd_printk("WSS dma1 # %d not valid\n", chip->dma1);
+ snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n",
+ chip->dma1);
goto __skip_resources;
}
#if defined(CS4231) || defined(OPTi93X)
if (chip->dma1 == chip->dma2) {
- snd_printk("don't want to share dmas\n");
+ snd_printk(KERN_ERR "don't want to share dmas\n");
return -EBUSY;
}
case 1:
break;
default:
- snd_printk("WSS dma2 # %d not valid\n", chip->dma2);
+ snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n",
+ chip->dma2);
goto __skip_resources;
}
dma_bits |= 0x04;
mpu_port_bits = 0x00;
break;
default:
- snd_printk("MPU-401 port 0x%lx not valid\n",
+ snd_printk(KERN_WARNING
+ "MPU-401 port 0x%lx not valid\n",
chip->mpu_port);
goto __skip_mpu;
}
mpu_irq_bits = 0x01;
break;
default:
- snd_printk("MPU-401 irq # %d not valid\n",
+ snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n",
chip->mpu_irq);
goto __skip_mpu;
}
if (chip->wss_base == SNDRV_AUTO_PORT) {
chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4);
if (chip->wss_base < 0) {
- snd_printk("unable to find a free WSS port\n");
+ snd_printk(KERN_ERR "unable to find a free WSS port\n");
return -EBUSY;
}
}
#if defined(CS4231) || defined(OPTi93X)
if (dma2 == SNDRV_AUTO_DMA) {
if ((dma2 = snd_legacy_find_free_dma(possible_dma2s[dma1 % 4])) < 0) {
- snd_printk("unable to find a free DMA2\n");
+ snd_printk(KERN_ERR "unable to find a free DMA2\n");
return -EBUSY;
}
}
return 0;
#endif
if (cs4232_pcm_port[dev] == SNDRV_AUTO_PORT) {
- snd_printk("specify CS4232 port\n");
+ snd_printk(KERN_ERR "specify CS4232 port\n");
return 0;
}
if (ics2115_port[dev] == SNDRV_AUTO_PORT) {
- snd_printk("specify ICS2115 port\n");
+ snd_printk(KERN_ERR "specify ICS2115 port\n");
return 0;
}
return 1;
wbuf[1] = i >> 7;
if (snd_wavefront_cmd (dev, WFC_IDENTIFY_SAMPLE_TYPE, rbuf, wbuf)) {
- snd_printk("cannot identify sample "
+ snd_printk(KERN_WARNING "cannot identify sample "
"type of slot %d\n", i);
dev->sample_status[i] = WF_ST_EMPTY;
continue;