tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
-config I2C_ALGO_SIBYTE
- tristate "SiByte SMBus interface"
- depends on SIBYTE_SB1xxx_SOC && I2C
- help
- Supports the SiByte SOC on-chip I2C interfaces (2 channels).
-
config I2C_ALGO_SGI
tristate "I2C SGI interfaces"
depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o
obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
-obj-$(CONFIG_I2C_ALGO_SIBYTE) += i2c-algo-sibyte.o
obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o
ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
+++ /dev/null
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-sibyte.c i2c driver algorithms for bit-shift adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 2001,2002,2003 Broadcom Corporation
- Copyright (C) 1995-2000 Simon G. Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl>. */
-
-/* Ported for SiByte SOCs by Broadcom Corporation. */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_smbus.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-sibyte.h>
-
-/* ----- global defines ----------------------------------------------- */
-#define SMB_CSR(a,r) ((long)(a->reg_base + r))
-
-/* ----- global variables --------------------------------------------- */
-
-/* module parameters:
- */
-static int bit_scan; /* have a look at what's hanging 'round */
-
-
-static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data * data)
-{
- struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
- int data_bytes = 0;
- int error;
-
- while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- switch (size) {
- case I2C_SMBUS_QUICK:
- csr_out32((V_SMB_ADDR(addr) | (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
- V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
- break;
- case I2C_SMBUS_BYTE:
- if (read_write == I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 1;
- } else {
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- case I2C_SMBUS_BYTE_DATA:
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- if (read_write == I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 1;
- } else {
- csr_out32(V_SMB_LB(data->byte), SMB_CSR(adap, R_SMB_DATA));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- case I2C_SMBUS_WORD_DATA:
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- if (read_write == I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 2;
- } else {
- csr_out32(V_SMB_LB(data->word & 0xff), SMB_CSR(adap, R_SMB_DATA));
- csr_out32(V_SMB_MB(data->word >> 8), SMB_CSR(adap, R_SMB_DATA));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- default:
- return -1; /* XXXKW better error code? */
- }
-
- while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
- if (error & M_SMB_ERROR) {
- /* Clear error bit by writing a 1 */
- csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
- return -1; /* XXXKW better error code? */
- }
-
- if (data_bytes == 1)
- data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
- if (data_bytes == 2)
- data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
-
- return 0;
-}
-
-static u32 bit_func(struct i2c_adapter *adap)
-{
- return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
-}
-
-
-/* -----exported algorithm data: ------------------------------------- */
-
-static struct i2c_algorithm i2c_sibyte_algo = {
- .smbus_xfer = smbus_xfer,
- .functionality = bit_func,
-};
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
-{
- int i;
- struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
-
- /* register new adapter to i2c module... */
- i2c_adap->algo = &i2c_sibyte_algo;
-
- /* Set the frequency to 100 kHz */
- csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
- csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
-
- /* scan bus */
- if (bit_scan) {
- union i2c_smbus_data data;
- int rc;
- printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
- i2c_adap->name);
- for (i = 0x00; i < 0x7f; i++) {
- /* XXXKW is this a realistic probe? */
- rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &data);
- if (!rc) {
- printk("(%02x)",i);
- } else
- printk(".");
- }
- printk("\n");
- }
-
- return i2c_add_adapter(i2c_adap);
-}
-
-
-int i2c_sibyte_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
-
-EXPORT_SYMBOL(i2c_sibyte_add_bus);
-EXPORT_SYMBOL(i2c_sibyte_del_bus);
-
-MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
-MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-module_param(bit_scan, int, 0);
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
-MODULE_LICENSE("GPL");
/*
* Copyright (C) 2004 Steven J. Hill
* Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 1995-2000 Simon G. Vogl
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/i2c-algo-sibyte.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <asm/io.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_smbus.h>
+
+struct i2c_algo_sibyte_data {
+ void *data; /* private data */
+ int bus; /* which bus */
+ void *reg_base; /* CSR base */
+};
+
+/* ----- global defines ----------------------------------------------- */
+#define SMB_CSR(a,r) ((long)(a->reg_base + r))
+
+/* ----- global variables --------------------------------------------- */
+
+/* module parameters:
+ */
+static int bit_scan; /* have a look at what's hanging 'round */
+module_param(bit_scan, int, 0);
+MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
+
+
+static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data * data)
+{
+ struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+ int data_bytes = 0;
+ int error;
+
+ while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ csr_out32((V_SMB_ADDR(addr) |
+ (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
+ V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
+ break;
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 1;
+ } else {
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ if (read_write == I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 1;
+ } else {
+ csr_out32(V_SMB_LB(data->byte),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ if (read_write == I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 2;
+ } else {
+ csr_out32(V_SMB_LB(data->word & 0xff),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32(V_SMB_MB(data->word >> 8),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ default:
+ return -1; /* XXXKW better error code? */
+ }
+
+ while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
+ if (error & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
+ return -1; /* XXXKW better error code? */
+ }
+
+ if (data_bytes == 1)
+ data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
+ if (data_bytes == 2)
+ data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
+
+ return 0;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+ return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
+}
+
+
+/* -----exported algorithm data: ------------------------------------- */
+
+static struct i2c_algorithm i2c_sibyte_algo = {
+ .smbus_xfer = smbus_xfer,
+ .functionality = bit_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+{
+ int i;
+ struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+
+ /* register new adapter to i2c module... */
+ i2c_adap->algo = &i2c_sibyte_algo;
+
+ /* Set the frequency to 100 kHz */
+ csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
+ csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
+
+ /* scan bus */
+ if (bit_scan) {
+ union i2c_smbus_data data;
+ int rc;
+ printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
+ i2c_adap->name);
+ for (i = 0x00; i < 0x7f; i++) {
+ /* XXXKW is this a realistic probe? */
+ rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &data);
+ if (!rc) {
+ printk("(%02x)",i);
+ } else
+ printk(".");
+ }
+ printk("\n");
+ }
+
+ return i2c_add_adapter(i2c_adap);
+}
+
+
static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
{ NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
{ NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
static void __exit i2c_sibyte_exit(void)
{
- i2c_sibyte_del_bus(&sibyte_board_adapter[0]);
- i2c_sibyte_del_bus(&sibyte_board_adapter[1]);
+ i2c_del_bus(&sibyte_board_adapter[0]);
+ i2c_del_bus(&sibyte_board_adapter[1]);
}
module_init(i2c_sibyte_init);
+++ /dev/null
-/*
- * Copyright (C) 2001,2002,2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef I2C_ALGO_SIBYTE_H
-#define I2C_ALGO_SIBYTE_H 1
-
-#include <linux/i2c.h>
-
-struct i2c_algo_sibyte_data {
- void *data; /* private data */
- int bus; /* which bus */
- void *reg_base; /* CSR base */
-};
-
-int i2c_sibyte_add_bus(struct i2c_adapter *, int speed);
-int i2c_sibyte_del_bus(struct i2c_adapter *);
-
-#endif /* I2C_ALGO_SIBYTE_H */
projects / openwrt / staging / blogic.git / commitdiff