}
/*
- * We maintain three seperate rbtrees: one for direct refs, one for
+ * We maintain three separate rbtrees: one for direct refs, one for
* indirect refs which have a key, and one for indirect refs which do not
* have a key. Each tree does merge on insertion.
*
}
/*
- * Now it's a direct ref, put it in the the direct tree. We must
+ * Now it's a direct ref, put it in the direct tree. We must
* do this last because the ref could be merged/freed here.
*/
prelim_ref_insert(fs_info, &preftrees->direct, ref, NULL);
* write operations. Therefore it keeps the linkage
* information for a block until a block is
* rewritten. This can temporarily cause incorrect
- * and even circular linkage informations. This
+ * and even circular linkage information. This
* causes no harm unless such blocks are referenced
* by the most recent super block.
*/
/*
* Shannon Entropy calculation
*
- * Pure byte distribution analysis fails to determine compressiability of data.
+ * Pure byte distribution analysis fails to determine compressibility of data.
* Try calculating entropy to estimate the average minimum number of bits
* needed to encode the sampled data.
*
/*
* Use 4 bits as radix base
- * Use 16 u32 counters for calculating new possition in buf array
+ * Use 16 u32 counters for calculating new position in buf array
*
* @array - array that will be sorted
* @array_buf - buffer array to store sorting results
*
* What is forced COW:
* when we create snapshot during committing the transaction,
- * after we've finished coping src root, we must COW the shared
+ * after we've finished copying src root, we must COW the shared
* block to ensure the metadata consistency.
*/
if (btrfs_header_generation(buf) == trans->transid &&
/* Key greater than all keys in the leaf, right neighbor has
* enough room for it and we're not emptying our leaf to delete
* it, therefore use right neighbor to insert the new item and
- * no need to touch/dirty our left leaft. */
+ * no need to touch/dirty our left leaf. */
btrfs_tree_unlock(left);
free_extent_buffer(left);
path->nodes[0] = right;
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancellation is wanted.
if (!sb_rdonly(sb) && !btrfs_check_rw_degradable(fs_info, NULL)) {
btrfs_warn(fs_info,
- "writeable mount is not allowed due to too many missing devices");
+ "writable mount is not allowed due to too many missing devices");
goto fail_sysfs;
}
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
/*
* This is a fast path so only do this check if we have sanity tests
- * enabled. Normal people shouldn't be using umapped buffers as dirty
+ * enabled. Normal people shouldn't be using unmapped buffers as dirty
* outside of the sanity tests.
*/
if (unlikely(test_bit(EXTENT_BUFFER_UNMAPPED, &buf->bflags)))
/*
* is_data == BTRFS_REF_TYPE_BLOCK, tree block type is required,
- * is_data == BTRFS_REF_TYPE_DATA, data type is requried,
+ * is_data == BTRFS_REF_TYPE_DATA, data type is requiried,
* is_data == BTRFS_REF_TYPE_ANY, either type is OK.
*/
int btrfs_get_extent_inline_ref_type(const struct extent_buffer *eb,
}
}
- /* if its not on the io list, we need to put the block group */
+ /* if it's not on the io list, we need to put the block group */
if (should_put)
btrfs_put_block_group(cache);
if (drop_reserve)
/*
* If we have dup, raid1 or raid10 then only half of the free
- * space is actually useable. For raid56, the space info used
+ * space is actually usable. For raid56, the space info used
* doesn't include the parity drive, so we don't have to
* change the math
*/
* @orig_bytes - the number of bytes we want
* @flush - whether or not we can flush to make our reservation
*
- * This will reserve orgi_bytes number of bytes from the space info associated
+ * This will reserve orig_bytes number of bytes from the space info associated
* with the block_rsv. If there is not enough space it will make an attempt to
* flush out space to make room. It will do this by flushing delalloc if
* possible or committing the transaction. If flush is 0 then no attempts to
/**
* btrfs_inode_rsv_refill - refill the inode block rsv.
* @inode - the inode we are refilling.
- * @flush - the flusing restriction.
+ * @flush - the flushing restriction.
*
* Essentially the same as btrfs_block_rsv_refill, except it uses the
* block_rsv->size as the minimum size. We'll either refill the missing amount
- * or return if we already have enough space. This will also handle the resreve
+ * or return if we already have enough space. This will also handle the reserve
* tracepoint for the reserved amount.
*/
static int btrfs_inode_rsv_refill(struct btrfs_inode *inode,
buf->log_index = root->log_transid % 2;
/*
* we allow two log transactions at a time, use different
- * EXENT bit to differentiate dirty pages.
+ * EXTENT bit to differentiate dirty pages.
*/
if (buf->log_index == 0)
set_extent_dirty(&root->dirty_log_pages, buf->start,
}
/*
- * checks to see if its even possible to relocate this block group.
+ * Checks to see if it's even possible to relocate this block group.
*
* @return - -1 if it's not a good idea to relocate this block group, 0 if its
* ok to go ahead and try.
* check for two cases, either we are full, and therefore
* don't need to bother with the caching work since we won't
* find any space, or we are empty, and we can just add all
- * the space in and be done with it. This saves us _alot_ of
+ * the space in and be done with it. This saves us _a_lot_ of
* time, particularly in the full case.
*/
if (found_key.offset == btrfs_block_group_used(&cache->item)) {
mutex_lock(&trans->transaction->cache_write_mutex);
/*
- * make sure our free spache cache IO is done before remove the
+ * Make sure our free space cache IO is done before removing the
* free space inode
*/
spin_lock(&trans->transaction->dirty_bgs_lock);
if (!blk_queue_discard(bdev_get_queue(device->bdev)))
return 0;
- /* Not writeable = nothing to do. */
+ /* Not writable = nothing to do. */
if (!test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state))
return 0;
/*
* utility function to clear some bits in an extent state struct.
- * it will optionally wake up any one waiting on this state (wake == 1).
+ * it will optionally wake up anyone waiting on this state (wake == 1).
*
* If no bits are set on the state struct after clearing things, the
* struct is freed and removed from the tree
/*
* Sanity check, extent_fiemap() should have ensured that new
- * fiemap extent won't overlap with cahced one.
+ * fiemap extent won't overlap with cached one.
* Not recoverable.
*
* NOTE: Physical address can overlap, due to compression
struct extent_io_ops {
/*
- * The following callbacks must be allways defined, the function
+ * The following callbacks must be always defined, the function
* pointer will be called unconditionally.
*/
extent_submit_bio_hook_t *submit_bio_hook;
return container_of(prev, struct extent_map, rb_node);
}
-/* helper for btfs_get_extent. Given an existing extent in the tree,
+/*
+ * Helper for btrfs_get_extent. Given an existing extent in the tree,
* the existing extent is the nearest extent to map_start,
* and an extent that you want to insert, deal with overlap and insert
* the best fitted new extent into the tree.
filp->private_data = NULL;
/*
- * ordered_data_close is set by settattr when we are about to truncate
+ * ordered_data_close is set by setattr when we are about to truncate
* a file from a non-zero size to a zero size. This tries to
* flush down new bytes that may have been written if the
* application were using truncate to replace a file in place.
/*
* We have to do this here to avoid the priority inversion of waiting on
- * IO of a lower priority task while holding a transaciton open.
+ * IO of a lower priority task while holding a transaction open.
*/
ret = btrfs_wait_ordered_range(inode, start, len);
if (ret) {
* here we could get into a situation where we're waiting on IO to
* happen that is blocked on a transaction trying to commit. With start
* we inc the extwriter counter, so we wait for all extwriters to exit
- * before we start blocking join'ers. This comment is to keep somebody
+ * before we start blocking joiners. This comment is to keep somebody
* from thinking they are super smart and changing this to
* btrfs_join_transaction *cough*Josef*cough*.
*/
/*
* Cleanup all submitted ordered extents in specified range to handle errors
- * from the fill_dellaloc() callback.
+ * from the btrfs_run_delalloc_range() callback.
*
* NOTE: caller must ensure that when an error happens, it can not call
* extent_clear_unlock_delalloc() to clear both the bits EXTENT_DO_ACCOUNTING
/*
* We don't reserve metadata space for space cache inodes so we
- * don't need to call dellalloc_release_metadata if there is an
+ * don't need to call delalloc_release_metadata if there is an
* error.
*/
if (*bits & EXTENT_CLEAR_META_RESV &&
/*
* This function is also used to drop the items in the log tree before
* we relog the inode, so if root != BTRFS_I(inode)->root, it means
- * it is used to drop the loged items. So we shouldn't kill the delayed
+ * it is used to drop the logged items. So we shouldn't kill the delayed
* items.
*/
if (min_type == 0 && root == BTRFS_I(inode)->root)
truncate_setsize(inode, newsize);
- /* Disable nonlocked read DIO to avoid the end less truncate */
+ /* Disable nonlocked read DIO to avoid the endless truncate */
btrfs_inode_block_unlocked_dio(BTRFS_I(inode));
inode_dio_wait(inode);
btrfs_inode_resume_unlocked_dio(BTRFS_I(inode));
return;
/*
* Our bio might span multiple ordered extents. In this case
- * we keep goin until we have accounted the whole dio.
+ * we keep going until we have accounted the whole dio.
*/
if (ordered_offset < offset + bytes) {
ordered_bytes = offset + bytes - ordered_offset;
* Records the total size (including the header) of compressed data.
*
* 2. Segment(s)
- * Variable size. Each segment includes one segment header, followd by data
+ * Variable size. Each segment includes one segment header, followed by data
* payload.
* One regular LZO compressed extent can have one or more segments.
* For inlined LZO compressed extent, only one segment is allowed.
* - sync
* - copy also limits on subvol creation
* - limit
- * - caches fuer ulists
+ * - caches for ulists
* - performance benchmarks
* - check all ioctl parameters
*/
__del_qgroup_rb(qgroup);
}
/*
- * we call btrfs_free_qgroup_config() when umounting
+ * We call btrfs_free_qgroup_config() when unmounting
* filesystem and disabling quota, so we set qgroup_ulist
* to be null here to avoid double free.
*/
* The easy accounting, we're updating qgroup relationship whose child qgroup
* only has exclusive extents.
*
- * In this case, all exclsuive extents will also be exlusive for parent, so
+ * In this case, all exclusive extents will also be exclusive for parent, so
* excl/rfer just get added/removed.
*
* So is qgroup reservation space, which should also be added/removed to
*
* 2) Mark the final tree blocks in @src_path and @dst_path qgroup dirty
* NOTE: In above case, OO(a) and NN(a) won't be marked qgroup dirty.
- * They should be marked during preivous (@dst_level = 1) iteration.
+ * They should be marked during previous (@dst_level = 1) iteration.
*
* 3) Mark file extents in leaves dirty
* We don't have good way to pick out new file extents only.
* So we still follow the old method by scanning all file extents in
* the leave.
*
- * This function can free us from keeping two pathes, thus later we only need
+ * This function can free us from keeping two paths, thus later we only need
* to care about how to iterate all new tree blocks in reloc tree.
*/
static int qgroup_trace_extent_swap(struct btrfs_trans_handle* trans,
*
* We will iterate through tree blocks NN(b), NN(d) and info qgroup to trace
* above tree blocks along with their counter parts in file tree.
- * While during search, old tree blocsk OO(c) will be skiped as tree block swap
+ * While during search, old tree blocks OO(c) will be skipped as tree block swap
* won't affect OO(c).
*/
static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,
* Will go down the tree block pointed by @dst_eb (pointed by @dst_parent and
* @dst_slot), and find any tree blocks whose generation is at @last_snapshot,
* and then go down @src_eb (pointed by @src_parent and @src_slot) to find
- * the conterpart of the tree block, then mark both tree blocks as qgroup dirty,
+ * the counterpart of the tree block, then mark both tree blocks as qgroup dirty,
* and skip all tree blocks whose generation is smaller than last_snapshot.
*
* This would skip tons of tree blocks of original btrfs_qgroup_trace_subtree(),
*
* Each type should have different reservation behavior.
* E.g, data follows its io_tree flag modification, while
- * *currently* meta is just reserve-and-clear during transcation.
+ * *currently* meta is just reserve-and-clear during transaction.
*
* TODO: Add new type for reservation which can survive transaction commit.
- * Currect metadata reservation behavior is not suitable for such case.
+ * Current metadata reservation behavior is not suitable for such case.
*/
struct btrfs_qgroup_rsv {
u64 values[BTRFS_QGROUP_RSV_LAST];
* - In case of single failure, where rbio->failb == -1:
*
* Cache this rbio iff the above read reconstruction is
- * excuted without problems.
+ * executed without problems.
*/
if (err == BLK_STS_OK && rbio->failb < 0)
cache_rbio_pages(rbio);
* back to the delayed ref action. We hold the ref we are changing in the
* action so we can account for the history properly, and we record the root we
* were called with since it could be different from ref_root. We also store
- * stack traces because thats how I roll.
+ * stack traces because that's how I roll.
*/
struct ref_action {
int action;
/*
* One of these for every block we reference, it holds the roots and references
- * to it as well as all of the ref actions that have occured to it. We never
+ * to it as well as all of the ref actions that have occurred to it. We never
* free it until we unmount the file system in order to make sure re-allocations
* are happening properly.
*/
* This shouldn't happen because we will add our re
* above when we lookup the be with !parent, but just in
* case catch this case so we don't panic because I
- * didn't thik of some other corner case.
+ * didn't think of some other corner case.
*/
btrfs_err(fs_info, "failed to find root %llu for %llu",
root->root_key.objectid, be->bytenr);
* only one thread can access block_rsv at this point,
* so we don't need hold lock to protect block_rsv.
* we expand more reservation size here to allow enough
- * space for relocation and we will return eailer in
+ * space for relocation and we will return earlier in
* enospc case.
*/
rc->block_rsv->size = tmp + fs_info->nodesize *
if (!ret && sctx->is_dev_replace) {
/*
* If we are doing a device replace wait for any tasks
- * that started dellaloc right before we set the block
+ * that started delalloc right before we set the block
* group to RO mode, as they might have just allocated
* an extent from it or decided they could do a nocow
* write. And if any such tasks did that, wait for their
* inodes "orphan" name instead of the real name and stop. Same with new inodes
* that were not created yet and overwritten inodes/refs.
*
- * When do we have have orphan inodes:
+ * When do we have orphan inodes:
* 1. When an inode is freshly created and thus no valid refs are available yet
* 2. When a directory lost all it's refs (deleted) but still has dir items
* inside which were not processed yet (pending for move/delete). If anyone
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
/*
* __btrfs_handle_fs_error decodes expected errors from the caller and
- * invokes the approciate error response.
+ * invokes the appropriate error response.
*/
__cold
void __btrfs_handle_fs_error(struct btrfs_fs_info *fs_info, const char *function,
* although there is no way to update the progress. It would add the
* risk of a deadlock, therefore the canceling is omitted. The only
* penalty is that some I/O remains active until the procedure
- * completes. The next time when the filesystem is mounted writeable
+ * completes. The next time when the filesystem is mounted writable
* again, the device replace operation continues.
*/
}
if (!btrfs_check_rw_degradable(fs_info, NULL)) {
btrfs_warn(fs_info,
- "too many missing devices, writeable remount is not allowed");
+ "too many missing devices, writable remount is not allowed");
ret = -EACCES;
goto restore;
}
* device_list_mutex here as we only read the device data and the list
* is protected by RCU. Even if a device is deleted during the list
* traversals, we'll get valid data, the freeing callback will wait at
- * least until until the rcu_read_unlock.
+ * least until the rcu_read_unlock.
*/
rcu_read_lock();
cur_devices = fs_info->fs_devices;
/*
* btrfs_attach_transaction_barrier() - catch the running transaction
*
- * It is similar to the above function, the differentia is this one
+ * It is similar to the above function, the difference is this one
* will wait for all the inactive transactions until they fully
* complete.
*/
return 0;
/*
- * Ensure dirty @src will be commited. Or, after comming
+ * Ensure dirty @src will be committed. Or, after coming
* commit_fs_roots() and switch_commit_roots(), any dirty but not
* recorded root will never be updated again, causing an outdated root
* item.
*
* @type: leaf or node
* @identifier: the necessary info to locate the leaf/node.
- * It's recommened to decode key.objecitd/offset if it's
+ * It's recommended to decode key.objecitd/offset if it's
* meaningful.
* @reason: describe the error
- * @bad_value: optional, it's recommened to output bad value and its
+ * @bad_value: optional, it's recommended to output bad value and its
* expected value (range).
*
* Since comma is used to separate the components, only space is allowed
}
/*
- * Support for new compression/encrption must introduce incompat flag,
+ * Support for new compression/encryption must introduce incompat flag,
* and must be caught in open_ctree().
*/
if (btrfs_file_extent_compression(leaf, fi) > BTRFS_COMPRESS_TYPES) {
}
btrfs_release_path(path);
- /* look for a conflicing name */
+ /* look for a conflicting name */
di = btrfs_lookup_dir_item(trans, root, path, btrfs_ino(dir),
name, namelen, 0);
if (di && !IS_ERR(di)) {
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * Nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
* the mutex can be very coarse and can cover long-running operations
*
* protects: updates to fs_devices counters like missing devices, rw devices,
- * seeding, structure cloning, openning/closing devices at mount/umount time
+ * seeding, structure cloning, opening/closing devices at mount/umount time
*
* global::fs_devs - add, remove, updates to the global list
*
BUG_ON(1);
}
- /* we don't want a chunk larger than 10% of writeable space */
+ /* We don't want a chunk larger than 10% of writable space */
max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1),
max_chunk_size);
}
/*
- * Chunk allocation falls into two parts. The first part does works
- * that make the new allocated chunk useable, but not do any operation
- * that modifies the chunk tree. The second part does the works that
- * require modifying the chunk tree. This division is important for the
+ * Chunk allocation falls into two parts. The first part does work
+ * that makes the new allocated chunk usable, but does not do any operation
+ * that modifies the chunk tree. The second part does the work that
+ * requires modifying the chunk tree. This division is important for the
* bootstrap process of adding storage to a seed btrfs.
*/
int btrfs_alloc_chunk(struct btrfs_trans_handle *trans, u64 type)
if (missing > max_tolerated) {
if (!failing_dev)
btrfs_warn(fs_info,
- "chunk %llu missing %d devices, max tolerance is %d for writeable mount",
+ "chunk %llu missing %d devices, max tolerance is %d for writable mount",
em->start, missing, max_tolerated);
free_extent_map(em);
ret = false;
projects / openwrt / staging / blogic.git / commitdiff