usb: dwc2: add support for host mode external vbus supply

This patch adds a way to enable an external vbus supply in host mode,
when dwc2 drvvbus signal is not used.

This patch is very similar to the one done in U-Boot dwc2 driver [1]. It
also adds dynamic vbus supply management depending on the role and state
of the core.

[1] https://lists.denx.de/pipermail/u-boot/2017-March/283434.html

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index bef182993fa0d84bbfd29476e75b05c9c6fbd85d..d83be5651f870a5a45f8194693c105dfb474394e 100644 (file)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -819,6 +819,7 @@ struct dwc2_hregs_backup {
  * @plat:               The platform specific configuration data. This can be
  *                      removed once all SoCs support usb transceiver.
  * @supplies:           Definition of USB power supplies
+ * @vbus_supply:        Regulator supplying vbus.
  * @phyif:              PHY interface width
  * @lock:              Spinlock that protects all the driver data structures
  * @priv:              Stores a pointer to the struct usb_hcd
@@ -958,6 +959,7 @@ struct dwc2_hsotg {
        struct usb_phy *uphy;
        struct dwc2_hsotg_plat *plat;
        struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
+       struct regulator *vbus_supply;
        u32 phyif;
 
        spinlock_t lock;

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 7341d5abe8e102e4e5768afdf067f21dd0cc23f9..dcfda5eb4cac9a8ff8c4bc69167fc8bf8ff80362 100644 (file)
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -356,6 +356,23 @@ static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
        dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
 }
 
+static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg)
+{
+       hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
+       if (IS_ERR(hsotg->vbus_supply))
+               return 0;
+
+       return regulator_enable(hsotg->vbus_supply);
+}
+
+static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg)
+{
+       if (hsotg->vbus_supply)
+               return regulator_disable(hsotg->vbus_supply);
+
+       return 0;
+}
+
 /**
  * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
  *
@@ -3275,6 +3292,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 
        /* B-Device connector (Device Mode) */
        if (gotgctl & GOTGCTL_CONID_B) {
+               dwc2_vbus_supply_exit(hsotg);
                /* Wait for switch to device mode */
                dev_dbg(hsotg->dev, "connId B\n");
                if (hsotg->bus_suspended) {
@@ -4323,6 +4341,9 @@ static int _dwc2_hcd_start(struct usb_hcd *hcd)
        }
 
        spin_unlock_irqrestore(&hsotg->lock, flags);
+
+       dwc2_vbus_supply_init(hsotg);
+
        return 0;
 }
 
@@ -4350,6 +4371,8 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
        spin_unlock_irqrestore(&hsotg->lock, flags);
 
+       dwc2_vbus_supply_exit(hsotg);
+
        usleep_range(1000, 3000);
 }
 
@@ -4386,6 +4409,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
                hprt0 |= HPRT0_SUSP;
                hprt0 &= ~HPRT0_PWR;
                dwc2_writel(hprt0, hsotg->regs + HPRT0);
+               dwc2_vbus_supply_exit(hsotg);
        }
 
        /* Enter partial_power_down */
@@ -4466,6 +4490,8 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
                spin_unlock_irqrestore(&hsotg->lock, flags);
                dwc2_port_resume(hsotg);
        } else {
+               dwc2_vbus_supply_init(hsotg);
+
                /* Wait for controller to correctly update D+/D- level */
                usleep_range(3000, 5000);