mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE

MMC_CAP2_FULL_PWR_CYCLE shall be set by host drivers which are able to
do a complete power cycle of the card. In the eMMC case that includes
both vcc and vccq.

This CAP is providing the protocol layer with important information,
needed to take optimized decisions during card initialization and in
the suspend/resume sequence.

MMC_CAP2_POWEROFF_NOTIFY is replaced by MMC_CAP2_FULL_PWR_CYCLE, since
it makes sense to use a wider scope for it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index e2946a98a1fa2cf09dd977740eafa2d790e6eca9..e5ed79eb8e3d834a56f3be32b341c2b07e099f56 100644 (file)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1484,7 +1484,7 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
                goto out;
 
        if (mmc_can_poweroff_notify(host->card) &&
-               ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) || !is_suspend))
+               ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend))
                err = mmc_poweroff_notify(host->card, notify_type);
        else if (mmc_can_sleep(host->card))
                err = mmc_sleep(host);

diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index eb2e6e1e5a3ec5b8fcba9eff0d8c2480a675aa75..3b0c33ae13e1d7b32b051a2cb9a673d641914876 100644 (file)
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -264,7 +264,7 @@ struct mmc_host {
 
 #define MMC_CAP2_BOOTPART_NOACC        (1 << 0)        /* Boot partition no access */
 #define MMC_CAP2_CACHE_CTRL    (1 << 1)        /* Allow cache control */
-#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)      /* Notify poweroff supported */
+#define MMC_CAP2_FULL_PWR_CYCLE        (1 << 2)        /* Can do full power cycle */
 #define MMC_CAP2_NO_MULTI_READ (1 << 3)        /* Multiblock reads don't work */
 #define MMC_CAP2_NO_SLEEP_CMD  (1 << 4)        /* Don't allow sleep command */
 #define MMC_CAP2_HS200_1_8V_SDR        (1 << 5)        /* can support */