ARM: ux500: Move GPIO regulator for SD-card into board DTSs

The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but
instead it's specific to the board. Move the definition of it, into the
board DTSs.

Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index bfd3f1c734b8d84dec4a622032e1b29efa07b83d..2201cd5da3bb95843278b27c8f855d540d154041 100644 (file)
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1017,23 +1017,6 @@
                        status = "disabled";
                };
 
-               vmmci: regulator-gpio {
-                       compatible = "regulator-gpio";
-
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <2900000>;
-                       regulator-name = "mmci-reg";
-                       regulator-type = "voltage";
-
-                       startup-delay-us = <100>;
-                       enable-active-high;
-
-                       states = <1800000 0x1
-                                 2900000 0x0>;
-
-                       status = "disabled";
-               };
-
                mcde@a0350000 {
                        compatible = "stericsson,mcde";
                        reg = <0xa0350000 0x1000>, /* MCDE */

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index bf8f0eddc2c020d03dda99adfdc32d453e254c14..8cf499ad31a5cb273de24691dbdd1baae7490bd3 100644 (file)
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -111,6 +111,23 @@
                        pinctrl-1 = <&i2c3_sleep_mode>;
                };
 
+               vmmci: regulator-gpio {
+                       compatible = "regulator-gpio";
+
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2900000>;
+                       regulator-name = "mmci-reg";
+                       regulator-type = "voltage";
+
+                       startup-delay-us = <100>;
+                       enable-active-high;
+
+                       states = <1800000 0x1
+                                 2900000 0x0>;
+
+                       status = "disabled";
+               };
+
                // External Micro SD slot
                sdi0_per1@80126000 {
                        arm,primecell-periphid = <0x10480180>;

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 206826a855c0dc0e5025539e5a8930405c8cdd56..65a7f630af8262485281913fd43411f5b2a9b2c9 100644 (file)
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -146,8 +146,23 @@
                };
 
                vmmci: regulator-gpio {
+                       compatible = "regulator-gpio";
+
                        gpios = <&gpio7 4 0x4>;
                        enable-gpio = <&gpio6 25 0x4>;
+
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2900000>;
+                       regulator-name = "mmci-reg";
+                       regulator-type = "voltage";
+
+                       startup-delay-us = <100>;
+                       enable-active-high;
+
+                       states = <1800000 0x1
+                                 2900000 0x0>;
+
+                       status = "disabled";
                };
 
                // External Micro SD slot