The bridge driver also has some helper functions it can use:
struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter,
- "module_foo", "chipid", 0x36);
+ "module_foo", "chipid", 0x36, NULL);
This loads the given module (can be NULL if no module needs to be loaded) and
calls i2c_new_device() with the given i2c_adapter and chip/address arguments.
If all goes well, then it registers the subdev with the v4l2_device.
-You can also use v4l2_i2c_new_probed_subdev() which is very similar to
-v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses
-that it should probe. Internally it calls i2c_new_probed_device().
+You can also use the last argument of v4l2_i2c_new_subdev() to pass an array
+of possible I2C addresses that it should probe. These probe addresses are
+only used if the previous argument is 0. A non-zero argument means that you
+know the exact i2c address so in that case no probing will take place.
Both functions return NULL if something went wrong.
-Note that the chipid you pass to v4l2_i2c_new_(probed_)subdev() is usually
+Note that the chipid you pass to v4l2_i2c_new_subdev() is usually
the same as the module name. It allows you to specify a chip variant, e.g.
"saa7114" or "saa7115". In general though the i2c driver autodetects this.
The use of chipid is something that needs to be looked at more closely at a
v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with
irq set to 0 and platform_data set to NULL.
-Note that in the next kernel release the functions v4l2_i2c_new_subdev,
-v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be
-replaced by a single v4l2_i2c_new_subdev that is identical to
-v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments.
-
struct video_device
-------------------
be abstracted out if we ever need to support a different
demod) */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "au8522", "au8522", 0x8e >> 1);
+ "au8522", "au8522", 0x8e >> 1, NULL);
if (sd == NULL)
printk(KERN_ERR "analog subdev registration failed\n");
}
if (dev->board.tuner_type != TUNER_ABSENT) {
/* Load the tuner module, which does the attach */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tuner", "tuner", dev->board.tuner_addr);
+ "tuner", "tuner", dev->board.tuner_addr, NULL);
if (sd == NULL)
printk(KERN_ERR "tuner subdev registration fail\n");
};
struct v4l2_subdev *sd;
- sd = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "saa6588", "saa6588", addrs);
+ sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "saa6588", "saa6588", 0, addrs);
btv->has_saa6588 = (sd != NULL);
}
I2C_CLIENT_END
};
- btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "msp3400", "msp3400", addrs);
+ btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "msp3400", "msp3400", 0, addrs);
if (btv->sd_msp34xx)
return;
goto no_audio;
I2C_CLIENT_END
};
- if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+ if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
return;
goto no_audio;
}
case 3: {
/* The user specified that we should probe for tvaudio */
- btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+ btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
goto no_audio;
it really is a msp3400, so it will return NULL when the device
found is really something else (e.g. a tea6300). */
if (!bttv_tvcards[btv->c.type].no_msp34xx) {
- btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+ btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "msp3400", "msp3400",
- I2C_ADDR_MSP3400 >> 1);
+ 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
- btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+ btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "msp3400", "msp3400",
- I2C_ADDR_MSP3400_ALT >> 1);
+ 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
}
/* If we found a msp34xx, then we're done. */
I2C_CLIENT_END
};
- if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+ if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
return;
}
/* Now see if we can find one of the tvaudio devices. */
- btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+ btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
/* Load tuner module before issuing tuner config call! */
if (bttv_tvcards[btv->c.type].has_radio)
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_RADIO));
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+ 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = btv->tuner_type;
cam->sensor_addr = 0x42;
cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter,
- "ov7670", "ov7670", cam->sensor_addr);
+ "ov7670", "ov7670", cam->sensor_addr, NULL);
if (cam->sensor == NULL) {
ret = -ENODEV;
goto out_smbus;
if (hw == CX18_HW_TUNER) {
/* special tuner group handling */
- sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
- adap, mod, type, cx->card_i2c->radio);
+ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+ adap, mod, type, 0, cx->card_i2c->radio);
if (sd != NULL)
sd->grp_id = hw;
- sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
- adap, mod, type, cx->card_i2c->demod);
+ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+ adap, mod, type, 0, cx->card_i2c->demod);
if (sd != NULL)
sd->grp_id = hw;
- sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
- adap, mod, type, cx->card_i2c->tv);
+ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+ adap, mod, type, 0, cx->card_i2c->tv);
if (sd != NULL)
sd->grp_id = hw;
return sd != NULL ? 0 : -1;
return -1;
/* It's an I2C device other than an analog tuner or IR chip */
- sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx]);
+ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx], NULL);
if (sd != NULL)
sd->grp_id = hw;
return sd != NULL ? 0 : -1;
if (dev->board.decoder == CX231XX_AVDECODER) {
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[0].i2c_adap,
- "cx25840", "cx25840", 0x88 >> 1);
+ "cx25840", "cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
cx231xx_info("cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
if (dev->board.tuner_type != TUNER_ABSENT) {
dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- "tuner", "tuner", 0xc2 >> 1);
+ "tuner", "tuner", 0xc2 >> 1, NULL);
if (dev->sd_tuner == NULL)
cx231xx_info("tuner subdev registration failure\n");
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
- "cx25840", "cx25840", 0x88 >> 1);
+ "cx25840", "cx25840", 0x88 >> 1, NULL);
v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
break;
}
if (dev->tuner_addr)
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- "tuner", "tuner", dev->tuner_addr);
+ "tuner", "tuner", dev->tuner_addr, NULL);
else
- sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- "tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV));
+ "tuner", "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
if (sd) {
struct tuner_setup tun_setup;
The radio_type is sometimes missing, or set to UNSET but
later code configures a tea5767.
*/
- v4l2_i2c_new_probed_subdev(&core->v4l2_dev, &core->i2c_adap,
+ v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
"tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
if (has_demod)
- v4l2_i2c_new_probed_subdev(&core->v4l2_dev,
+ v4l2_i2c_new_subdev(&core->v4l2_dev,
&core->i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (core->board.tuner_addr == ADDR_UNSET) {
- v4l2_i2c_new_probed_subdev(&core->v4l2_dev,
+ v4l2_i2c_new_subdev(&core->v4l2_dev,
&core->i2c_adap, "tuner", "tuner",
- has_demod ? tv_addrs + 4 : tv_addrs);
+ 0, has_demod ? tv_addrs + 4 : tv_addrs);
} else {
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- "tuner", "tuner", core->board.tuner_addr);
+ "tuner", "tuner", core->board.tuner_addr, NULL);
}
}
if (core->board.audio_chip == V4L2_IDENT_WM8775)
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- "wm8775", "wm8775", 0x36 >> 1);
+ "wm8775", "wm8775", 0x36 >> 1, NULL);
if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
/* This probes for a tda9874 as is used on some
Pixelview Ultra boards. */
- v4l2_i2c_new_probed_subdev_addr(&core->v4l2_dev,
+ v4l2_i2c_new_subdev(&core->v4l2_dev,
&core->i2c_adap,
- "tvaudio", "tvaudio", 0xb0 >> 1);
+ "tvaudio", "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
}
switch (core->boardnr) {
}
for (i = 0; i < subdev_count; i++) {
- vpif_obj.sd[i] = v4l2_i2c_new_probed_subdev(&vpif_obj.v4l2_dev,
+ vpif_obj.sd[i] = v4l2_i2c_new_subdev(&vpif_obj.v4l2_dev,
i2c_adap, subdevdata[i].name,
subdevdata[i].name,
- &subdevdata[i].addr);
+ 0, I2C_ADDRS(subdevdata[i].addr));
if (!vpif_obj.sd[i]) {
vpif_err("Error registering v4l2 subdevice\n");
goto probe_subdev_out;
/* request some modules */
if (dev->board.has_msp34xx)
- v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "msp3400", "msp3400", msp3400_addrs);
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "msp3400", "msp3400", 0, msp3400_addrs);
if (dev->board.decoder == EM28XX_SAA711X)
- v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "saa7115", "saa7115_auto", saa711x_addrs);
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "saa7115", "saa7115_auto", 0, saa711x_addrs);
if (dev->board.decoder == EM28XX_TVP5150)
- v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tvp5150", "tvp5150", tvp5150_addrs);
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tvp5150", "tvp5150", 0, tvp5150_addrs);
if (dev->em28xx_sensor == EM28XX_MT9V011) {
struct v4l2_subdev *sd;
- sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap, "mt9v011", "mt9v011", 0, mt9v011_addrs);
v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
}
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tvaudio", "tvaudio", dev->board.tvaudio_addr);
+ "tvaudio", "tvaudio", dev->board.tvaudio_addr, NULL);
if (dev->board.tuner_type != TUNER_ABSENT) {
int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tuner", "tuner", dev->board.radio_addr);
+ "tuner", "tuner", dev->board.radio_addr, NULL);
if (has_demod)
- v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
struct v4l2_subdev *sd;
- sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(type));
+ 0, v4l2_i2c_tuner_addrs(type));
if (sd)
dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tuner", "tuner", dev->tuner_addr);
+ "tuner", "tuner", dev->tuner_addr, NULL);
}
}
return -1;
if (hw == IVTV_HW_TUNER) {
/* special tuner handling */
- sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type,
- itv->card_i2c->radio);
+ 0, itv->card_i2c->radio);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type,
- itv->card_i2c->demod);
+ 0, itv->card_i2c->demod);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type,
- itv->card_i2c->tv);
+ 0, itv->card_i2c->tv);
if (sd)
sd->grp_id = 1 << idx;
return sd ? 0 : -1;
if (!hw_addrs[idx])
return -1;
if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
- sd = v4l2_i2c_new_probed_subdev_addr(&itv->v4l2_dev,
- adap, mod, type, hw_addrs[idx]);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
+ adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx]));
} else {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, mod, type, hw_addrs[idx]);
+ adap, mod, type, hw_addrs[idx], NULL);
}
if (sd)
sd->grp_id = 1 << idx;
}
mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- "saa7115", "saa7111", I2C_SAA7111A);
+ "saa7115", "saa7111", I2C_SAA7111A, NULL);
mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- "tea6420", "tea6420", I2C_TEA6420_1);
+ "tea6420", "tea6420", I2C_TEA6420_1, NULL);
mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- "tea6420", "tea6420", I2C_TEA6420_2);
+ "tea6420", "tea6420", I2C_TEA6420_2, NULL);
mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- "tea6415c", "tea6415c", I2C_TEA6415C);
+ "tea6415c", "tea6415c", I2C_TEA6415C, NULL);
mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- "tda9840", "tda9840", I2C_TDA9840);
+ "tda9840", "tda9840", I2C_TDA9840, NULL);
mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- "tuner", "tuner", I2C_TUNER);
+ "tuner", "tuner", I2C_TUNER, NULL);
if (v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- "saa5246a", "saa5246a", I2C_SAA5246A)) {
+ "saa5246a", "saa5246a", I2C_SAA5246A, NULL)) {
printk(KERN_INFO "mxb: found teletext decoder\n");
}
return -EINVAL;
}
- /* Note how the 2nd and 3rd arguments are the same for both
- * v4l2_i2c_new_subdev() and v4l2_i2c_new_probed_subdev(). Why?
+ /* Note how the 2nd and 3rd arguments are the same for
+ * v4l2_i2c_new_subdev(). Why?
* Well the 2nd argument is the module name to load, while the 3rd
* argument is documented in the framework as being the "chipid" -
* and every other place where I can find examples of this, the
mid, i2caddr[0]);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
fname, fname,
- i2caddr[0]);
+ i2caddr[0], NULL);
} else {
pvr2_trace(PVR2_TRACE_INIT,
"Module ID %u:"
" Setting up with address probe list",
mid);
- sd = v4l2_i2c_new_probed_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
+ sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
fname, fname,
- i2caddr);
+ 0, i2caddr);
}
if (!sd) {
if (dev->radio_type != UNSET)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap, "tuner", "tuner",
- dev->radio_addr);
+ dev->radio_addr, NULL);
if (has_demod)
- v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == ADDR_UNSET) {
enum v4l2_i2c_tuner_type type =
has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
- v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(type));
+ 0, v4l2_i2c_tuner_addrs(type));
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap, "tuner", "tuner",
- dev->tuner_addr);
+ dev->tuner_addr, NULL);
}
}
struct v4l2_subdev *sd =
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"saa6752hs", "saa6752hs",
- saa7134_boards[dev->board].empress_addr);
+ saa7134_boards[dev->board].empress_addr, NULL);
if (sd)
sd->grp_id = GRP_EMPRESS;
if (saa7134_boards[dev->board].rds_addr) {
struct v4l2_subdev *sd;
- sd = v4l2_i2c_new_probed_subdev_addr(&dev->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap, "saa6588", "saa6588",
- saa7134_boards[dev->board].rds_addr);
+ 0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
if (sd) {
printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
dev->has_rds = 1;
switch (usbvision_device_data[usbvision->DevModel].Codec) {
case CODEC_SAA7113:
case CODEC_SAA7111:
- v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+ v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
&usbvision->i2c_adap, "saa7115",
- "saa7115_auto", saa711x_addrs);
+ "saa7115_auto", 0, saa711x_addrs);
break;
}
if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
enum v4l2_i2c_tuner_type type;
struct tuner_setup tun_setup;
- sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
&usbvision->i2c_adap, "tuner",
- "tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
/* depending on whether we found a demod or not, select
the tuner type. */
type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
- sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
&usbvision->i2c_adap, "tuner",
- "tuner", v4l2_i2c_tuner_addrs(type));
+ "tuner", 0, v4l2_i2c_tuner_addrs(type));
if (usbvision->tuner_type != -1) {
tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
-/* Load an i2c sub-device. */
-struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type, u8 addr)
-{
- struct v4l2_subdev *sd = NULL;
- struct i2c_client *client;
- struct i2c_board_info info;
-
- BUG_ON(!v4l2_dev);
-
- if (module_name)
- request_module(module_name);
-
- /* Setup the i2c board info with the device type and
- the device address. */
- memset(&info, 0, sizeof(info));
- strlcpy(info.type, client_type, sizeof(info.type));
- info.addr = addr;
-
- /* Create the i2c client */
- client = i2c_new_device(adapter, &info);
- /* Note: it is possible in the future that
- c->driver is NULL if the driver is still being loaded.
- We need better support from the kernel so that we
- can easily wait for the load to finish. */
- if (client == NULL || client->driver == NULL)
- goto error;
-
- /* Lock the module so we can safely get the v4l2_subdev pointer */
- if (!try_module_get(client->driver->driver.owner))
- goto error;
- sd = i2c_get_clientdata(client);
-
- /* Register with the v4l2_device which increases the module's
- use count as well. */
- if (v4l2_device_register_subdev(v4l2_dev, sd))
- sd = NULL;
- /* Decrease the module use count to match the first try_module_get. */
- module_put(client->driver->driver.owner);
-
- if (sd) {
- /* We return errors from v4l2_subdev_call only if we have the
- callback as the .s_config is not mandatory */
- int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
-
- if (err && err != -ENOIOCTLCMD) {
- v4l2_device_unregister_subdev(sd);
- sd = NULL;
- }
- }
-
-error:
- /* If we have a client but no subdev, then something went wrong and
- we must unregister the client. */
- if (client && sd == NULL)
- i2c_unregister_device(client);
- return sd;
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev);
-
-/* Probe and load an i2c sub-device. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
- const unsigned short *addrs)
-{
- struct v4l2_subdev *sd = NULL;
- struct i2c_client *client = NULL;
- struct i2c_board_info info;
-
- BUG_ON(!v4l2_dev);
-
- if (module_name)
- request_module(module_name);
-
- /* Setup the i2c board info with the device type and
- the device address. */
- memset(&info, 0, sizeof(info));
- strlcpy(info.type, client_type, sizeof(info.type));
-
- /* Probe and create the i2c client */
- client = i2c_new_probed_device(adapter, &info, addrs);
- /* Note: it is possible in the future that
- c->driver is NULL if the driver is still being loaded.
- We need better support from the kernel so that we
- can easily wait for the load to finish. */
- if (client == NULL || client->driver == NULL)
- goto error;
-
- /* Lock the module so we can safely get the v4l2_subdev pointer */
- if (!try_module_get(client->driver->driver.owner))
- goto error;
- sd = i2c_get_clientdata(client);
-
- /* Register with the v4l2_device which increases the module's
- use count as well. */
- if (v4l2_device_register_subdev(v4l2_dev, sd))
- sd = NULL;
- /* Decrease the module use count to match the first try_module_get. */
- module_put(client->driver->driver.owner);
-
- if (sd) {
- /* We return errors from v4l2_subdev_call only if we have the
- callback as the .s_config is not mandatory */
- int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
-
- if (err && err != -ENOIOCTLCMD) {
- v4l2_device_unregister_subdev(sd);
- sd = NULL;
- }
- }
-
-error:
- /* If we have a client but no subdev, then something went wrong and
- we must unregister the client. */
- if (client && sd == NULL)
- i2c_unregister_device(client);
- return sd;
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev);
-
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type, u8 addr)
-{
- unsigned short addrs[2] = { addr, I2C_CLIENT_END };
-
- return v4l2_i2c_new_probed_subdev(v4l2_dev, adapter,
- module_name, client_type, addrs);
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr);
-
/* Load an i2c sub-device. */
struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
struct i2c_adapter *adapter, const char *module_name,
vino_init_stage++;
vino_drvdata->decoder =
- v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev,
- &vino_i2c_adapter, "saa7191", "saa7191", 0x45);
+ v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
+ "saa7191", "saa7191", 0, I2C_ADDRS(0x45));
vino_drvdata->camera =
- v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev,
- &vino_i2c_adapter, "indycam", "indycam", 0x2b);
+ v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
+ "indycam", "indycam", 0, I2C_ADDRS(0x2b));
dprintk("init complete!\n");
w9968cf_turn_on_led(cam);
w9968cf_i2c_init(cam);
- cam->sensor_sd = v4l2_i2c_new_probed_subdev(&cam->v4l2_dev,
+ cam->sensor_sd = v4l2_i2c_new_subdev(&cam->v4l2_dev,
&cam->i2c_adapter,
- "ovcamchip", "ovcamchip", addrs);
+ "ovcamchip", "ovcamchip", 0, addrs);
usb_set_intfdata(intf, cam);
mutex_unlock(&cam->dev_mutex);
goto zr_free_irq;
}
- zr->decoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev,
+ zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
&zr->i2c_adapter, zr->card.mod_decoder, zr->card.i2c_decoder,
- zr->card.addrs_decoder);
+ 0, zr->card.addrs_decoder);
if (zr->card.mod_encoder)
- zr->encoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev,
+ zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
&zr->i2c_adapter,
zr->card.mod_encoder, zr->card.i2c_encoder,
- zr->card.addrs_encoder);
+ 0, zr->card.addrs_encoder);
dprintk(2,
KERN_INFO "%s: Initializing videocodec bus...\n",
/* Load an i2c module and return an initialized v4l2_subdev struct.
Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type, u8 addr);
-/* Probe and load an i2c module and return an initialized v4l2_subdev struct.
- Only call request_module if module_name != NULL.
- The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
struct i2c_adapter *adapter,
const char *module_name, const char *client_type,
- const unsigned short *addrs);
-/* Like v4l2_i2c_new_probed_subdev, except probe for a single address. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type, u8 addr);
+ int irq, void *platform_data,
+ u8 addr, const unsigned short *probe_addrs);
/* Load an i2c module and return an initialized v4l2_subdev struct.
Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
struct i2c_adapter *adapter,
const char *module_name, const char *client_type,
- int irq, void *platform_data,
- u8 addr, const unsigned short *probe_addrs);
+ u8 addr, const unsigned short *probe_addrs)
+{
+ return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name,
+ client_type, 0, NULL, addr, probe_addrs);
+}
struct i2c_board_info;
projects / openwrt / staging / blogic.git / commitdiff