CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex A firmware
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
endef
define Package/dsl-vrx200-firmware-xdsl-a/description
CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex B firmware
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
endef
define Package/dsl-vrx200-firmware-xdsl-b/description
CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex B to Annex A firmware patch
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-b +bspatch
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-b +bspatch
endef
define Package/dsl-vrx200-firmware-xdsl-a-patch/description
CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex A to Annex B firmware patch
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-a +bspatch
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-a +bspatch
endef
define Package/dsl-vrx200-firmware-xdsl-b-patch/description
KernelPackage/ltq-atm-danube=$(call KernelPackage/ltq-atm-template,danube,(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy))
KernelPackage/ltq-atm-ar9=$(call KernelPackage/ltq-atm-template,ar9,TARGET_lantiq_xway)
KernelPackage/ltq-atm-ase=$(call KernelPackage/ltq-atm-template,ase,TARGET_lantiq_ase)
-KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,TARGET_lantiq_xrx200)
+KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
define Build/Configure
endef
TITLE:=deu driver for $(1)
URL:=http://www.lantiq.com/
VARIANT:=$(1)
- DEPENDS:=@TARGET_lantiq_$(2) +kmod-crypto-manager +kmod-crypto-des
+ DEPENDS:=@$(2) +kmod-crypto-manager +kmod-crypto-des
FILES:=$(PKG_BUILD_DIR)/ltq_deu_$(1).ko
AUTOLOAD:=$(call AutoProbe,ltq_deu_$(1))
endef
-KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,xway)
-KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,xway)
-KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,xrx200)
+KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,TARGET_lantiq_xway)
+KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,TARGET_lantiq_xway)
+KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
define Build/Configure
endef
TITLE:=ptm driver for $(1)
URL:=http://www.lantiq.com/
VARIANT:=$(1)
- DEPENDS:=@TARGET_lantiq_$(2)
+ DEPENDS:=@$(2)
ifeq ($(1),vr9)
DEPENDS+= +PACKAGE_kmod-ltq-ptm-$(1):kmod-ltq-vdsl-vr9-mei
else
FILES:=$(PKG_BUILD_DIR)/ltq_ptm_$(1).ko
endef
-KernelPackage/ltq-ptm-danube=$(call KernelPackage/ltq-ptm-template,danube,xway)
-KernelPackage/ltq-ptm-ar9=$(call KernelPackage/ltq-ptm-template,ar9,xway)
-KernelPackage/ltq-ptm-ase=$(call KernelPackage/ltq-ptm-template,ase,ase)
-KernelPackage/ltq-ptm-vr9=$(call KernelPackage/ltq-ptm-template,vr9,xrx200)
+KernelPackage/ltq-ptm-danube=$(call KernelPackage/ltq-ptm-template,danube,TARGET_lantiq_xway)
+KernelPackage/ltq-ptm-ar9=$(call KernelPackage/ltq-ptm-template,ar9,TARGET_lantiq_xway)
+KernelPackage/ltq-ptm-ase=$(call KernelPackage/ltq-ptm-template,ase,TARGET_lantiq_ase)
+KernelPackage/ltq-ptm-vr9=$(call KernelPackage/ltq-ptm-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
define Build/Configure
endef
TITLE:=VDSL2 Vectoring Firmware installer
SECTION:=net
CATEGORY:=Network
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vdsl-vr9
endef
define Build/Prepare
TITLE:=mei driver for vdsl
SECTION:=sys
SUBMENU:=Network Devices
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-ifxos +kmod-ltq-vectoring
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-ifxos +kmod-ltq-vectoring
FILES:=$(PKG_BUILD_DIR)/src/drv_mei_cpe.ko
AUTOLOAD:=$(call AutoLoad,50,drv_mei_cpe)
endef
CATEGORY:=Network
TITLE:=Lantiq mei driver test tool
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
endef
define Package/ltq-vdsl-vr9-mei-test/description
TITLE:=vdsl driver
SECTION:=sys
SUBMENU:=Network Devices
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9-mei
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vdsl-vr9-mei
FILES:=$(PKG_BUILD_DIR)/src/drv_dsl_cpe_api.ko
AUTOLOAD:=$(call AutoLoad,51,drv_dsl_cpe_api)
endef
CATEGORY:=Kernel modules
SUBMENU:=Network Devices
TITLE:=driver for sending vectoring error samples
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring.ko
AUTOLOAD:=$(call AutoLoad,49,ltq_vectoring)
endef
CATEGORY:=Kernel modules
SUBMENU:=Network Devices
TITLE:=driver for testing the vectoring driver
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vectoring
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vectoring
FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring_test.ko
endef
CATEGORY:=Network
TITLE:=Lantiq VDSL userland tool
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +libpthread +librt +ltq-dsl-base +libubox +libubus
PROVIDES:=ltq-dsl-app
endef
BOARD:=lantiq
BOARDNAME:=Lantiq
FEATURES:=squashfs
-SUBTARGETS:=xrx200 xway xway_legacy falcon ase
+SUBTARGETS:=xrx200 xrx200_legacy xway xway_legacy falcon ase
KERNEL_PATCHVER:=6.6
include ar9.mk
endif
+ifeq ($(SUBTARGET),xrx200_legacy)
+DEFAULT_SOC := vr9
+include tp-link_legacy.mk
+include vr9_legacy.mk
+endif
+
ifeq ($(SUBTARGET),xrx200)
DEFAULT_SOC := vr9
include tp-link.mk
check-size | append-metadata
endef
-define Device/tplink_tdw8970
- $(Device/dsa-migration)
- $(Device/lantiqTpLink)
- DEVICE_MODEL := TD-W8970
- DEVICE_VARIANT := v1
- TPLINK_FLASHLAYOUT := 8Mltq
- TPLINK_HWID := 0x89700001
- TPLINK_HWREV := 1
- IMAGE_SIZE := 7680k
- DEVICE_PACKAGES:= kmod-ath9k wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
- SUPPORTED_DEVICES += TDW8970
-endef
-TARGET_DEVICES += tplink_tdw8970
-
-define Device/tplink_tdw8980
- $(Device/dsa-migration)
- $(Device/lantiqTpLink)
- DEVICE_MODEL := TD-W8980
- DEVICE_VARIANT := v1
- TPLINK_FLASHLAYOUT := 8Mltq
- TPLINK_HWID := 0x89800001
- TPLINK_HWREV := 14
- IMAGE_SIZE := 7680k
- DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
- SUPPORTED_DEVICES += TDW8980
-endef
-TARGET_DEVICES += tplink_tdw8980
-
define Device/tplink_vr200
$(Device/dsa-migration)
$(Device/lantiqTpLink)
--- /dev/null
+DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
+
+define Device/dsa-migration
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
+define Device/lantiqTpLink
+ DEVICE_VENDOR := TP-Link
+ TPLINK_HWREVADD := 0
+ TPLINK_HVERSION := 2
+ KERNEL := kernel-bin | append-dtb | lzma
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | \
+ tplink-v2-header -s -V "ver. 1.0"
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := tplink-v2-image -s -V "ver. 1.0" | \
+ check-size | append-metadata
+endef
+
+define Device/tplink_tdw8970
+ $(Device/dsa-migration)
+ $(Device/lantiqTpLink)
+ DEVICE_MODEL := TD-W8970
+ DEVICE_VARIANT := v1
+ TPLINK_FLASHLAYOUT := 8Mltq
+ TPLINK_HWID := 0x89700001
+ TPLINK_HWREV := 1
+ IMAGE_SIZE := 7680k
+ DEVICE_PACKAGES:= kmod-ath9k wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+ SUPPORTED_DEVICES += TDW8970
+endef
+TARGET_DEVICES += tplink_tdw8970
+
+define Device/tplink_tdw8980
+ $(Device/dsa-migration)
+ $(Device/lantiqTpLink)
+ DEVICE_MODEL := TD-W8980
+ DEVICE_VARIANT := v1
+ TPLINK_FLASHLAYOUT := 8Mltq
+ TPLINK_HWID := 0x89800001
+ TPLINK_HWREV := 14
+ IMAGE_SIZE := 7680k
+ DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+ SUPPORTED_DEVICES += TDW8980
+endef
+TARGET_DEVICES += tplink_tdw8980
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
-define Device/alphanetworks_asl56026
- $(Device/dsa-migration)
- DEVICE_VENDOR := Alpha
- DEVICE_MODEL := ASL56026
- DEVICE_ALT0_VENDOR := BT Openreach
- DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
- IMAGE_SIZE := 7488k
- DEFAULT := n
-endef
-TARGET_DEVICES += alphanetworks_asl56026
-
define Device/arcadyan_arv7519rw22
$(Device/dsa-migration)
DEVICE_VENDOR := Arcadyan
endef
TARGET_DEVICES += arcadyan_arv7519rw22
-define Device/arcadyan_vg3503j
- $(Device/dsa-migration)
- DEVICE_VENDOR := BT Openreach
- DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
- IMAGE_SIZE := 8000k
- SUPPORTED_DEVICES += VG3503J
- DEFAULT := n
-endef
-TARGET_DEVICES += arcadyan_vg3503j
-
define Device/arcadyan_vgv7510kw22-brn
$(Device/dsa-migration)
$(Device/lantiqBrnImage)
endef
TARGET_DEVICES += lantiq_easy80920-nor
-define Device/netgear_dm200
- $(Device/dsa-migration)
- DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := DM200
- IMAGES := sysupgrade.bin factory.img
- IMAGE/sysupgrade.bin := append-kernel | \
- pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
- pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
- append-rootfs | pad-rootfs | check-size | append-metadata
- IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
- IMAGE_SIZE := 7872k
- NETGEAR_BOARD_ID := DM200
- NETGEAR_HW_ID := 29765233+8+0+64+0+0
-endef
-TARGET_DEVICES += netgear_dm200
-
define Device/zyxel_p-2812hnu-f1
$(Device/dsa-migration)
$(Device/NAND)
--- /dev/null
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+
+define Device/dsa-migration
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
+define Device/alphanetworks_asl56026
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := Alpha
+ DEVICE_MODEL := ASL56026
+ DEVICE_ALT0_VENDOR := BT Openreach
+ DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
+ IMAGE_SIZE := 7488k
+ DEFAULT := n
+endef
+TARGET_DEVICES += alphanetworks_asl56026
+
+define Device/arcadyan_vg3503j
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := BT Openreach
+ DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
+ IMAGE_SIZE := 8000k
+ SUPPORTED_DEVICES += VG3503J
+ DEFAULT := n
+endef
+TARGET_DEVICES += arcadyan_vg3503j
+
+define Device/netgear_dm200
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := DM200
+ IMAGES := sysupgrade.bin factory.img
+ IMAGE/sysupgrade.bin := append-kernel | \
+ pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+ pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+ append-rootfs | pad-rootfs | check-size | append-metadata
+ IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
+ IMAGE_SIZE := 7872k
+ NETGEAR_BOARD_ID := DM200
+ NETGEAR_HW_ID := 29765233+8+0+64+0+0
+endef
+TARGET_DEVICES += netgear_dm200
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x20"
ucidef_set_led_default "router" "router" "green:router" "1"
;;
-netgear,dm200)
- ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
- ;;
esac
board_config_flush
local board="$1"
case "$board" in
- alphanetworks,asl56026|\
- arcadyan,vg3503j)
- ucidef_set_interface_lan "lan1 lan2"
- ;;
arcadyan,arv7519rw22)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
;;
avm,fritz7490|\
avm,fritz7490-micron|\
buffalo,wbmr-300hpd|\
- tplink,tdw8970|\
- tplink,tdw8980|\
tplink,vr200|\
tplink,vr200v)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
- avm,fritz7412|\
- netgear,dm200)
+ avm,fritz7412)
ucidef_set_interface_lan "lan"
;;
*)
local wan_mac=""
case "$board" in
- alphanetworks,asl56026)
- lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanmac)
- ;;
arcadyan,arv7519rw22)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
;;
- arcadyan,vg3503j|\
lantiq,easy80920-nand|\
lantiq,easy80920-nor|\
zyxel,p-2812hnu-f1|\
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac="$lan_mac"
;;
- netgear,dm200)
- lan_mac=$(mtd_get_mac_binary ART 0x0)
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- tplink,tdw8970|\
- tplink,tdw8980)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
- ;;
tplink,vr200|\
tplink,vr200v)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
caldata_extract_ubi "caldata" 0x1000 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) 2) 0x10c
;;
- tplink,tdw8970|\
- tplink,tdw8980)
- caldata_extract "boardconfig" 0x21000 0x1000
- ;;
*)
caldata_die "board $board is not supported yet"
;;
}
case "$(board_name)" in
-alphanetworks,asl56026|\
arcadyan,arv7519rw22|\
-arcadyan,vg3503j|\
avm,fritz7360sl|\
bt,homehub-v5a)
do_internet_led_rename
--- /dev/null
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+led_wifi="$(get_dt_led wifi)"
+[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
+
+led_dsl="$(get_dt_led dsl)"
+[ -n "$led_dsl" ] && {
+ led_internet="$(get_dt_led internet)"
+ if [ -n "$led_internet" ]; then
+ ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
+ ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
+ else
+ ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
+ fi
+}
+
+board=$(board_name)
+
+case "$board" in
+netgear,dm200)
+ ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+lantiq_setup_interfaces()
+{
+ local board="$1"
+
+ case "$board" in
+ alphanetworks,asl56026|\
+ arcadyan,vg3503j)
+ ucidef_set_interface_lan "lan1 lan2"
+ ;;
+ tplink,tdw8970|\
+ tplink,tdw8980)
+ ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+ ;;
+ netgear,dm200)
+ ucidef_set_interface_lan "lan"
+ ;;
+ *)
+ ucidef_set_interface_lan 'eth0'
+ ;;
+ esac
+}
+
+lantiq_setup_dsl()
+{
+ local board="$1"
+ local annex="a"
+
+ lantiq_setup_dsl_helper "$annex"
+}
+
+lantiq_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+
+ case "$board" in
+ alphanetworks,asl56026)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanmac)
+ ;;
+ arcadyan,vg3503j)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ netgear,dm200)
+ lan_mac=$(mtd_get_mac_binary ART 0x0)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ tplink,tdw8970|\
+ tplink,tdw8980)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+}
+
+board_config_update
+board=$(board_name)
+lantiq_setup_interfaces $board
+lantiq_setup_dsl $board
+lantiq_setup_macs $board
+board_config_flush
+
+exit 0
--- /dev/null
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ *)
+ ucidef_set_compat_version "1.1"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+case "$FIRMWARE" in
+ "ath9k-eeprom-pci-0000:00:0e.0.bin" | \
+ "ath9k-eeprom-pci-0000:01:00.0.bin" | \
+ "ath9k-eeprom-pci-0000:02:00.0.bin")
+ board=$(board_name)
+
+ case "$board" in
+ tplink,tdw8970|\
+ tplink,tdw8980)
+ caldata_extract "boardconfig" 0x21000 0x1000
+ ;;
+ *)
+ caldata_die "board $board is not supported yet"
+ ;;
+ esac
+ ;;
+esac
--- /dev/null
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+
+. /lib/functions/migrations.sh
+
+do_internet_led_rename()
+{
+ config_load system
+
+ [ -n $(config_get led_internet name) ] || return
+ [ -z $(config_get led_dsl name) ] || return
+
+ uci rename system.led_internet=led_dsl
+ uci set system.led_dsl.name=dsl
+
+ logger -t led-migration "internet led renamed to dsl"
+}
+
+case "$(board_name)" in
+alphanetworks,asl56026|\
+arcadyan,vg3503j)
+ do_internet_led_rename
+ ;;
+esac
+
+remove_devicename_leds
+
+migrations_apply system
+
+exit 0
--- /dev/null
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GRO_CELLS=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_IFX_VPE_EXT=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INTEL_XWAY_PHY=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+# CONFIG_ISDN is not set
+CONFIG_LANTIQ_XRX200=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_FPAFF is not set
+CONFIG_MIPS_MT_SMP=y
+CONFIG_MIPS_NR_CPU_NR_MAP=2
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+CONFIG_MIPS_VPE_APSP_API=y
+CONFIG_MIPS_VPE_APSP_API_MT=y
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_MT=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_NEED_SRCU_NMI_SAFE=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_LANTIQ_GSWIP=y
+CONFIG_NET_DSA_TAG_GSWIP=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=2
+CONFIG_PADATA=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_LANTIQ=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LANTIQ=y
+CONFIG_PHYLINK=y
+CONFIG_PHY_LANTIQ_VRX200_PCIE=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_HWMON=y
+CONFIG_QCOM_NET_PHYLIB=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SENSORS_LTQ_CPUTEMP=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMMON=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
--- /dev/null
+define Profile/Default
+ NAME:=Default Profile
+ PRIORITY:=1
+endef
+
+define Profile/Default/Description
+ Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))
--- /dev/null
+ARCH:=mips
+SUBTARGET:=xrx200_legacy
+BOARDNAME:=XRX200 Legacy
+FEATURES+=atm ramdisk small_flash
+CPU_TYPE:=24kc
+
+DEFAULT_PACKAGES+=kmod-leds-gpio \
+ kmod-gpio-button-hotplug \
+ ltq-vdsl-vr9-vectoring-fw-installer \
+ kmod-ltq-vdsl-vr9-mei \
+ kmod-ltq-vdsl-vr9 \
+ kmod-ltq-atm-vr9 \
+ kmod-ltq-deu-vr9 \
+ kmod-ltq-ptm-vr9 \
+ ltq-vdsl-vr9-app \
+ dsl-vrx200-firmware-xdsl-a \
+ dsl-vrx200-firmware-xdsl-b-patch \
+ ppp-mod-pppoa
+
+define Target/Description
+ Lantiq XRX200 Legacy for boards with small flash
+endef
projects / openwrt / openwrt.git / commitdiff