ARM: dts: Kirkwood: Fix QNAP TS219 power-off

The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi"
addressed the wrong uart (0 = console). This patch changes the address
to select uart 1, which is the uart connected to the pic
microcontroller, which can switch the device off.

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off driver.")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index c56ab6bbfe3c3a1fa1b60f481840cbaa3292a7f2..0e46560551f44b5d5dba4a01dcd74d9eb91ec5b2 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -40,7 +40,7 @@
                };
                poweroff@12100 {
                        compatible = "qnap,power-off";
-                       reg = <0x12000 0x100>;
+                       reg = <0x12100 0x100>;
                        clocks = <&gate_clk 7>;
                };
                spi@10600 {