ds = dst->cpu_dp->ds;
if (unlikely(!pskb_may_pull(skb, BRCM_TAG_LEN)))
- goto out_drop;
+ return NULL;
/* skb->data points to the EtherType, the tag is right before it */
brcm_tag = skb->data - 2;
/* The opcode should never be different than 0b000 */
if (unlikely((brcm_tag[0] >> BRCM_OPCODE_SHIFT) & BRCM_OPCODE_MASK))
- goto out_drop;
+ return NULL;
/* We should never see a reserved reason code without knowing how to
* handle it
*/
if (unlikely(brcm_tag[2] & BRCM_EG_RC_RSVD))
- goto out_drop;
+ return NULL;
/* Locate which port this is coming from */
source_port = brcm_tag[3] & BRCM_EG_PID_MASK;
/* Validate port against switch setup, either the port is totally */
if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
- goto out_drop;
+ return NULL;
/* Remove Broadcom tag and update checksum */
skb_pull_rcsum(skb, BRCM_TAG_LEN);
skb->dev = ds->ports[source_port].netdev;
return skb;
-
-out_drop:
- return NULL;
}
const struct dsa_device_ops brcm_netdev_ops = {
int source_port;
if (unlikely(!pskb_may_pull(skb, DSA_HLEN)))
- goto out_drop;
+ return NULL;
/*
* The ethertype field is part of the DSA header.
* Check that frame type is either TO_CPU or FORWARD.
*/
if ((dsa_header[0] & 0xc0) != 0x00 && (dsa_header[0] & 0xc0) != 0xc0)
- goto out_drop;
+ return NULL;
/*
* Determine source device and port.
* port is a registered DSA port.
*/
if (source_device >= DSA_MAX_SWITCHES)
- goto out_drop;
+ return NULL;
ds = dst->ds[source_device];
if (!ds)
- goto out_drop;
+ return NULL;
if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
- goto out_drop;
+ return NULL;
/*
* Convert the DSA header to an 802.1q header if the 'tagged'
skb->dev = ds->ports[source_port].netdev;
return skb;
-
-out_drop:
- return NULL;
}
const struct dsa_device_ops dsa_netdev_ops = {
int source_port;
if (unlikely(!pskb_may_pull(skb, EDSA_HLEN)))
- goto out_drop;
+ return NULL;
/*
* Skip the two null bytes after the ethertype.
* Check that frame type is either TO_CPU or FORWARD.
*/
if ((edsa_header[0] & 0xc0) != 0x00 && (edsa_header[0] & 0xc0) != 0xc0)
- goto out_drop;
+ return NULL;
/*
* Determine source device and port.
* port is a registered DSA port.
*/
if (source_device >= DSA_MAX_SWITCHES)
- goto out_drop;
+ return NULL;
ds = dst->ds[source_device];
if (!ds)
- goto out_drop;
+ return NULL;
if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
- goto out_drop;
+ return NULL;
/*
* If the 'tagged' bit is set, convert the DSA tag to a 802.1q
skb->dev = ds->ports[source_port].netdev;
return skb;
-
-out_drop:
- return NULL;
}
const struct dsa_device_ops edsa_netdev_ops = {
__be16 *phdr, hdr;
if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
- goto out_drop;
+ return NULL;
/* The MTK header is added by the switch between src addr
* and ethertype at this point, skb->data points to 2 bytes
*/
ds = dst->ds[0];
if (!ds)
- goto out_drop;
+ return NULL;
/* Get source port information */
port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK);
if (!ds->ports[port].netdev)
- goto out_drop;
+ return NULL;
skb->dev = ds->ports[port].netdev;
return skb;
-
-out_drop:
- return NULL;
}
const struct dsa_device_ops mtk_netdev_ops = {
__be16 *phdr, hdr;
if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
- goto out_drop;
+ return NULL;
/* The QCA header is added by the switch between src addr and Ethertype
* At this point, skb->data points to ethertype so header should be
/* Make sure the version is correct */
ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S;
if (unlikely(ver != QCA_HDR_VERSION))
- goto out_drop;
+ return NULL;
/* Remove QCA tag and recalculate checksum */
skb_pull_rcsum(skb, QCA_HDR_LEN);
*/
ds = dst->cpu_dp->ds;
if (!ds)
- goto out_drop;
+ return NULL;
/* Get source port information */
port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);
if (!ds->ports[port].netdev)
- goto out_drop;
+ return NULL;
/* Update skb & forward the frame accordingly */
skb->dev = ds->ports[port].netdev;
return skb;
-
-out_drop:
- return NULL;
}
const struct dsa_device_ops qca_netdev_ops = {
ds = dst->cpu_dp->ds;
if (skb_linearize(skb))
- goto out_drop;
+ return NULL;
trailer = skb_tail_pointer(skb) - 4;
if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
(trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00)
- goto out_drop;
+ return NULL;
source_port = trailer[1] & 7;
if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
- goto out_drop;
+ return NULL;
pskb_trim_rcsum(skb, skb->len - 4);
skb->dev = ds->ports[source_port].netdev;
return skb;
-
-out_drop:
- return NULL;
}
const struct dsa_device_ops trailer_netdev_ops = {