--- /dev/null
+/*
+ * Copyright (c) 2012-2016 Synaptics Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define RMI_F30_QUERY_SIZE 2
+
+/* Defs for Query 0 */
+#define RMI_F30_EXTENDED_PATTERNS 0x01
+#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1)
+#define RMI_F30_HAS_LED (1 << 2)
+#define RMI_F30_HAS_GPIO (1 << 3)
+#define RMI_F30_HAS_HAPTIC (1 << 4)
+#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5)
+#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6)
+
+/* Defs for Query 1 */
+#define RMI_F30_GPIO_LED_COUNT 0x1F
+
+/* Defs for Control Registers */
+#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01
+#define RMI_F30_CTRL_1_HALT (1 << 4)
+#define RMI_F30_CTRL_1_HALTED (1 << 5)
+#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03
+
+struct rmi_f30_ctrl_data {
+ int address;
+ int length;
+ u8 *regs;
+};
+
+#define RMI_F30_CTRL_MAX_REGS 32
+#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3)
+#define RMI_F30_CTRL_MAX_REG_BLOCKS 11
+
+#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \
+ + 1 \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + 6 \
+ + RMI_F30_CTRL_MAX_REGS \
+ + RMI_F30_CTRL_MAX_REGS \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + 1 \
+ + 1)
+
+struct f30_data {
+ /* Query Data */
+ bool has_extended_pattern;
+ bool has_mappable_buttons;
+ bool has_led;
+ bool has_gpio;
+ bool has_haptic;
+ bool has_gpio_driver_control;
+ bool has_mech_mouse_btns;
+ u8 gpioled_count;
+
+ u8 register_count;
+
+ /* Control Register Data */
+ struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS];
+ u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE];
+ u32 ctrl_regs_size;
+
+ u8 data_regs[RMI_F30_CTRL_MAX_BYTES];
+ u16 *gpioled_key_map;
+
+ struct input_dev *input;
+};
+
+static int rmi_f30_read_control_parameters(struct rmi_function *fn,
+ struct f30_data *f30)
+{
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int error = 0;
+
+ error = rmi_read_block(rmi_dev, fn->fd.control_base_addr,
+ f30->ctrl_regs, f30->ctrl_regs_size);
+ if (error) {
+ dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n",
+ __func__, fn->fd.control_base_addr, error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+ struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int retval;
+ int gpiled = 0;
+ int value = 0;
+ int i;
+ int reg_num;
+
+ if (!f30->input)
+ return 0;
+
+ /* Read the gpi led data. */
+ if (rmi_dev->xport->attn_data) {
+ memcpy(f30->data_regs, rmi_dev->xport->attn_data,
+ f30->register_count);
+ rmi_dev->xport->attn_data += f30->register_count;
+ rmi_dev->xport->attn_size -= f30->register_count;
+ } else {
+ retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
+ f30->data_regs, f30->register_count);
+
+ if (retval) {
+ dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n",
+ __func__);
+ return retval;
+ }
+ }
+
+ for (reg_num = 0; reg_num < f30->register_count; ++reg_num) {
+ for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i,
+ ++gpiled) {
+ if (f30->gpioled_key_map[gpiled] != 0) {
+ /* buttons have pull up resistors */
+ value = (((f30->data_regs[reg_num] >> i) & 0x01)
+ == 0);
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+ "%s: call input report key (0x%04x) value (0x%02x)",
+ __func__,
+ f30->gpioled_key_map[gpiled], value);
+ input_report_key(f30->input,
+ f30->gpioled_key_map[gpiled],
+ value);
+ }
+
+ }
+ }
+
+ return 0;
+}
+
+static int rmi_f30_register_device(struct rmi_function *fn)
+{
+ int i;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+ struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+ struct input_dev *input_dev;
+ int button_count = 0;
+
+ input_dev = drv_data->input;
+ if (!input_dev) {
+ dev_info(&fn->dev, "F30: no input device found, ignoring.\n");
+ return -EINVAL;
+ }
+
+ f30->input = input_dev;
+
+ set_bit(EV_KEY, input_dev->evbit);
+
+ input_dev->keycode = f30->gpioled_key_map;
+ input_dev->keycodesize = sizeof(u16);
+ input_dev->keycodemax = f30->gpioled_count;
+
+ for (i = 0; i < f30->gpioled_count; i++) {
+ if (f30->gpioled_key_map[i] != 0) {
+ input_set_capability(input_dev, EV_KEY,
+ f30->gpioled_key_map[i]);
+ button_count++;
+ }
+ }
+
+ if (button_count == 1)
+ __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+ return 0;
+}
+
+static int rmi_f30_config(struct rmi_function *fn)
+{
+ struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+ struct rmi_driver *drv = fn->rmi_dev->driver;
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+ int error;
+
+ if (pdata->f30_data && pdata->f30_data->disable) {
+ drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
+ } else {
+ /* Write Control Register values back to device */
+ error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
+ f30->ctrl_regs, f30->ctrl_regs_size);
+ if (error) {
+ dev_err(&fn->rmi_dev->dev,
+ "%s : Could not write control registers at 0x%x error (%d)\n",
+ __func__, fn->fd.control_base_addr, error);
+ return error;
+ }
+
+ drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+ }
+ return 0;
+}
+
+static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
+ int *ctrl_addr, int len, u8 **reg)
+{
+ ctrl->address = *ctrl_addr;
+ ctrl->length = len;
+ ctrl->regs = *reg;
+ *ctrl_addr += len;
+ *reg += len;
+}
+
+static inline bool rmi_f30_is_valid_button(int button,
+ struct rmi_f30_ctrl_data *ctrl)
+{
+ int byte_position = button >> 3;
+ int bit_position = button & 0x07;
+
+ /*
+ * ctrl2 -> dir == 0 -> input mode
+ * ctrl3 -> data == 1 -> actual button
+ */
+ return !(ctrl[2].regs[byte_position] & BIT(bit_position)) &&
+ (ctrl[3].regs[byte_position] & BIT(bit_position));
+}
+
+static inline int rmi_f30_initialize(struct rmi_function *fn)
+{
+ struct f30_data *f30;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ const struct rmi_device_platform_data *pdata;
+ int retval = 0;
+ int control_address;
+ int i;
+ int button;
+ u8 buf[RMI_F30_QUERY_SIZE];
+ u8 *ctrl_reg;
+ u8 *map_memory;
+
+ f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data),
+ GFP_KERNEL);
+ if (!f30)
+ return -ENOMEM;
+
+ dev_set_drvdata(&fn->dev, f30);
+
+ retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf,
+ RMI_F30_QUERY_SIZE);
+
+ if (retval) {
+ dev_err(&fn->dev, "Failed to read query register.\n");
+ return retval;
+ }
+
+ f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
+ f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS;
+ f30->has_led = buf[0] & RMI_F30_HAS_LED;
+ f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO;
+ f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC;
+ f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL;
+ f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
+ f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
+
+ f30->register_count = (f30->gpioled_count + 7) >> 3;
+
+ control_address = fn->fd.control_base_addr;
+ ctrl_reg = f30->ctrl_regs;
+
+ if (f30->has_gpio && f30->has_led)
+ rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8),
+ &ctrl_reg);
+
+ if (f30->has_gpio) {
+ rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
+ f30->register_count, &ctrl_reg);
+ }
+
+ if (f30->has_led) {
+ int ctrl5_len;
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ if (f30->has_extended_pattern)
+ ctrl5_len = 6;
+ else
+ ctrl5_len = 2;
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
+ ctrl5_len, &ctrl_reg);
+ }
+
+ if (f30->has_led || f30->has_gpio_driver_control) {
+ /* control 6 uses a byte per gpio/led */
+ rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
+ f30->gpioled_count, &ctrl_reg);
+ }
+
+ if (f30->has_mappable_buttons) {
+ /* control 7 uses a byte per gpio/led */
+ rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
+ f30->gpioled_count, &ctrl_reg);
+ }
+
+ if (f30->has_haptic) {
+ rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
+ sizeof(u8), &ctrl_reg);
+ }
+
+ if (f30->has_mech_mouse_btns)
+ rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
+ sizeof(u8), &ctrl_reg);
+
+ f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs
+ ?: RMI_F30_CTRL_REGS_MAX_SIZE;
+
+ retval = rmi_f30_read_control_parameters(fn, f30);
+ if (retval < 0) {
+ dev_err(&fn->dev,
+ "Failed to initialize F19 control params.\n");
+ return retval;
+ }
+
+ map_memory = devm_kzalloc(&fn->dev,
+ (f30->gpioled_count * (sizeof(u16))),
+ GFP_KERNEL);
+ if (!map_memory) {
+ dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
+ return -ENOMEM;
+ }
+
+ f30->gpioled_key_map = (u16 *)map_memory;
+
+ pdata = rmi_get_platform_data(rmi_dev);
+ if (pdata && f30->has_gpio) {
+ button = BTN_LEFT;
+ for (i = 0; i < f30->gpioled_count; i++) {
+ if (rmi_f30_is_valid_button(i, f30->ctrl)) {
+ f30->gpioled_key_map[i] = button++;
+
+ /*
+ * buttonpad might be given by
+ * f30->has_mech_mouse_btns, but I am
+ * not sure, so use only the pdata info
+ */
+ if (pdata->f30_data &&
+ pdata->f30_data->buttonpad)
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int rmi_f30_probe(struct rmi_function *fn)
+{
+ int rc;
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+
+ if (pdata->f30_data && pdata->f30_data->disable)
+ return 0;
+
+ rc = rmi_f30_initialize(fn);
+ if (rc < 0)
+ goto error_exit;
+
+ rc = rmi_f30_register_device(fn);
+ if (rc < 0)
+ goto error_exit;
+
+ return 0;
+
+error_exit:
+ return rc;
+
+}
+
+struct rmi_function_handler rmi_f30_handler = {
+ .driver = {
+ .name = "rmi4_f30",
+ },
+ .func = 0x30,
+ .probe = rmi_f30_probe,
+ .config = rmi_f30_config,
+ .attention = rmi_f30_attention,
+};
projects / openwrt / staging / blogic.git / commitdiff