arm64: dts: marvell: use ICU for the CP110 slave RTC

When the conversion of the Marvell CP110 Device Tree description from
using GIC interrupts to using ICU interrupts was done, the RTC on the
slave CP110 was left unchanged. This commit fixes that, so that all
devices on the CP properly get their interrupt through the ICU.

Fixes: 6ef84a827c375 ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 95f8e5f607f608d2ec1bd258e1eec76f0d4b8528..471aaf8dc7501d4db417712f7da455dec65a36a0 100644 (file)
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -64,7 +64,7 @@
                                compatible = "marvell,armada-8k-rtc";
                                reg = <0x284000 0x20>, <0x284080 0x24>;
                                reg-names = "rtc", "rtc-soc";
-                               interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
                        };
 
                        cps_ethernet: ethernet@0 {