drm/i915/dvo: Remove incorrect kerneldoc markups

Regular comments where being marked up for kerneldoc, but were not
formatted properly. Remove the markup to remove the warnings.

drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'dvo' not described in 'ivch_read'
drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'addr' not described in 'ivch_read'
drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'data' not described in 'ivch_read'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-2-chris@chris-wilson.co.uk

diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index 4950b82f5b490e104fd08aae492a4df1faa6b036..c73aff163908af1933ea0d2d0afb4f42145ccbaf 100644 (file)
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -59,28 +59,28 @@
  * This must not be set while VR01_DVO_BYPASS_ENABLE is set.
  */
 # define VR01_LCD_ENABLE               (1 << 2)
-/** Enables the DVO repeater. */
+/* Enables the DVO repeater. */
 # define VR01_DVO_BYPASS_ENABLE                (1 << 1)
-/** Enables the DVO clock */
+/* Enables the DVO clock */
 # define VR01_DVO_ENABLE               (1 << 0)
-/** Enable dithering for 18bpp panels. Not documented. */
+/* Enable dithering for 18bpp panels. Not documented. */
 # define VR01_DITHER_ENABLE             (1 << 4)
 
 /*
  * LCD Interface Format
  */
 #define VR10           0x10
-/** Enables LVDS output instead of CMOS */
+/* Enables LVDS output instead of CMOS */
 # define VR10_LVDS_ENABLE              (1 << 4)
-/** Enables 18-bit LVDS output. */
+/* Enables 18-bit LVDS output. */
 # define VR10_INTERFACE_1X18           (0 << 2)
-/** Enables 24-bit LVDS or CMOS output */
+/* Enables 24-bit LVDS or CMOS output */
 # define VR10_INTERFACE_1X24           (1 << 2)
-/** Enables 2x18-bit LVDS or CMOS output. */
+/* Enables 2x18-bit LVDS or CMOS output. */
 # define VR10_INTERFACE_2X18           (2 << 2)
-/** Enables 2x24-bit LVDS output */
+/* Enables 2x24-bit LVDS output */
 # define VR10_INTERFACE_2X24           (3 << 2)
-/** Mask that defines the depth of the pipeline */
+/* Mask that defines the depth of the pipeline */
 # define VR10_INTERFACE_DEPTH_MASK      (3 << 2)
 
 /*
@@ -97,7 +97,7 @@
  * Panel power down status
  */
 #define VR30           0x30
-/** Read only bit indicating that the panel is not in a safe poweroff state. */
+/* Read only bit indicating that the panel is not in a safe poweroff state. */
 # define VR30_PANEL_ON                 (1 << 15)
 
 #define VR40           0x40
@@ -183,7 +183,7 @@ struct ivch_priv {
 
 
 static void ivch_dump_regs(struct intel_dvo_device *dvo);
-/**
+/*
  * Reads a register on the ivch.
  *
  * Each of the 256 registers are 16 bits long.
@@ -230,7 +230,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
        return false;
 }
 
-/** Writes a 16-bit register on the ivch */
+/* Writes a 16-bit register on the ivch */
 static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
 {
        struct ivch_priv *priv = dvo->dev_priv;
@@ -258,7 +258,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
        return false;
 }
 
-/** Probes the given bus and slave address for an ivch */
+/* Probes the given bus and slave address for an ivch */
 static bool ivch_init(struct intel_dvo_device *dvo,
                      struct i2c_adapter *adapter)
 {
@@ -338,7 +338,7 @@ static void ivch_reset(struct intel_dvo_device *dvo)
                ivch_write(dvo, backup_addresses[i], priv->reg_backup[i]);
 }
 
-/** Sets the power state of the panel connected to the ivch */
+/* Sets the power state of the panel connected to the ivch */
 static void ivch_dpms(struct intel_dvo_device *dvo, bool enable)
 {
        int i;