[media] au8522_decoder: convert to the control framework
authorHans Verkuil <hans.verkuil@cisco.com>
Fri, 15 Feb 2013 11:04:29 +0000 (08:04 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 25 Mar 2013 18:09:59 +0000 (15:09 -0300)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/au8522_decoder.c
drivers/media/dvb-frontends/au8522_priv.h

index 526902b45f9c8f89d47513de5a9d0eb4f55c8559..ad46a8f86af0c85d8a95d1bffd80ed1212d03ade 100644 (file)
@@ -229,15 +229,11 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
        /* Provide reasonable defaults for picture tuning values */
        au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07);
        au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed);
-       state->brightness = 0xed - 128;
        au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79);
-       state->contrast = 0x79;
        au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80);
        au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80);
-       state->saturation = 0x80;
        au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00);
        au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00);
-       state->hue = 0x00;
 
        /* Other decoder registers */
        au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00);
@@ -489,75 +485,32 @@ static void set_audio_input(struct au8522_state *state, int aud_input)
 
 /* ----------------------------------------------------------------------- */
 
-static int au8522_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int au8522_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-       struct au8522_state *state = to_state(sd);
+       struct au8522_state *state =
+               container_of(ctrl->handler, struct au8522_state, hdl);
 
        switch (ctrl->id) {
        case V4L2_CID_BRIGHTNESS:
-               state->brightness = ctrl->value;
                au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH,
-                               ctrl->value - 128);
+                               ctrl->val - 128);
                break;
        case V4L2_CID_CONTRAST:
-               state->contrast = ctrl->value;
                au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH,
-                               ctrl->value);
+                               ctrl->val);
                break;
        case V4L2_CID_SATURATION:
-               state->saturation = ctrl->value;
                au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH,
-                               ctrl->value);
+                               ctrl->val);
                au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH,
-                               ctrl->value);
+                               ctrl->val);
                break;
        case V4L2_CID_HUE:
-               state->hue = ctrl->value;
                au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH,
-                               ctrl->value >> 8);
+                               ctrl->val >> 8);
                au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH,
-                               ctrl->value & 0xFF);
-               break;
-       case V4L2_CID_AUDIO_VOLUME:
-       case V4L2_CID_AUDIO_BASS:
-       case V4L2_CID_AUDIO_TREBLE:
-       case V4L2_CID_AUDIO_BALANCE:
-       case V4L2_CID_AUDIO_MUTE:
-               /* Not yet implemented */
-       default:
-               return -EINVAL;
-       }
-
-       return 0;
-}
-
-static int au8522_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-       struct au8522_state *state = to_state(sd);
-
-       /* Note that we are using values cached in the state structure instead
-          of reading the registers due to issues with i2c reads not working
-          properly/consistently yet on the HVR-950q */
-
-       switch (ctrl->id) {
-       case V4L2_CID_BRIGHTNESS:
-               ctrl->value = state->brightness;
-               break;
-       case V4L2_CID_CONTRAST:
-               ctrl->value = state->contrast;
-               break;
-       case V4L2_CID_SATURATION:
-               ctrl->value = state->saturation;
-               break;
-       case V4L2_CID_HUE:
-               ctrl->value = state->hue;
+                               ctrl->val & 0xFF);
                break;
-       case V4L2_CID_AUDIO_VOLUME:
-       case V4L2_CID_AUDIO_BASS:
-       case V4L2_CID_AUDIO_TREBLE:
-       case V4L2_CID_AUDIO_BALANCE:
-       case V4L2_CID_AUDIO_MUTE:
-               /* Not yet supported */
        default:
                return -EINVAL;
        }
@@ -616,26 +569,6 @@ static int au8522_s_stream(struct v4l2_subdev *sd, int enable)
        return 0;
 }
 
-static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-       switch (qc->id) {
-       case V4L2_CID_CONTRAST:
-               return v4l2_ctrl_query_fill(qc, 0, 255, 1,
-                                           AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
-       case V4L2_CID_BRIGHTNESS:
-               return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109);
-       case V4L2_CID_SATURATION:
-               return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
-       case V4L2_CID_HUE:
-               return v4l2_ctrl_query_fill(qc, -32768, 32768, 1, 0);
-       default:
-               break;
-       }
-
-       qc->type = 0;
-       return -EINVAL;
-}
-
 static int au8522_reset(struct v4l2_subdev *sd, u32 val)
 {
        struct au8522_state *state = to_state(sd);
@@ -712,20 +645,18 @@ static int au8522_g_chip_ident(struct v4l2_subdev *sd,
        return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev);
 }
 
-static int au8522_log_status(struct v4l2_subdev *sd)
-{
-       /* FIXME: Add some status info here */
-       return 0;
-}
-
 /* ----------------------------------------------------------------------- */
 
 static const struct v4l2_subdev_core_ops au8522_core_ops = {
-       .log_status = au8522_log_status,
+       .log_status = v4l2_ctrl_subdev_log_status,
+       .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+       .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+       .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+       .g_ctrl = v4l2_subdev_g_ctrl,
+       .s_ctrl = v4l2_subdev_s_ctrl,
+       .queryctrl = v4l2_subdev_queryctrl,
+       .querymenu = v4l2_subdev_querymenu,
        .g_chip_ident = au8522_g_chip_ident,
-       .g_ctrl = au8522_g_ctrl,
-       .s_ctrl = au8522_s_ctrl,
-       .queryctrl = au8522_queryctrl,
        .reset = au8522_reset,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
        .g_register = au8522_g_register,
@@ -753,12 +684,17 @@ static const struct v4l2_subdev_ops au8522_ops = {
        .video = &au8522_video_ops,
 };
 
+static const struct v4l2_ctrl_ops au8522_ctrl_ops = {
+       .s_ctrl = au8522_s_ctrl,
+};
+
 /* ----------------------------------------------------------------------- */
 
 static int au8522_probe(struct i2c_client *client,
                        const struct i2c_device_id *did)
 {
        struct au8522_state *state;
+       struct v4l2_ctrl_handler *hdl;
        struct v4l2_subdev *sd;
        int instance;
        struct au8522_config *demod_config;
@@ -799,6 +735,27 @@ static int au8522_probe(struct i2c_client *client,
        sd = &state->sd;
        v4l2_i2c_subdev_init(sd, client, &au8522_ops);
 
+       hdl = &state->hdl;
+       v4l2_ctrl_handler_init(hdl, 4);
+       v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+                       V4L2_CID_BRIGHTNESS, 0, 255, 1, 109);
+       v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+                       V4L2_CID_CONTRAST, 0, 255, 1,
+                       AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
+       v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+                       V4L2_CID_SATURATION, 0, 255, 1, 128);
+       v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+                       V4L2_CID_HUE, -32768, 32767, 1, 0);
+       sd->ctrl_handler = hdl;
+       if (hdl->error) {
+               int err = hdl->error;
+
+               v4l2_ctrl_handler_free(hdl);
+               kfree(demod_config);
+               kfree(state);
+               return err;
+       }
+
        state->c = client;
        state->vid_input = AU8522_COMPOSITE_CH1;
        state->aud_input = AU8522_AUDIO_NONE;
@@ -815,6 +772,7 @@ static int au8522_remove(struct i2c_client *client)
 {
        struct v4l2_subdev *sd = i2c_get_clientdata(client);
        v4l2_device_unregister_subdev(sd);
+       v4l2_ctrl_handler_free(sd->ctrl_handler);
        au8522_release_state(to_state(sd));
        return 0;
 }
index 0529699a27bd64188f8c625d245db12278eb95e3..aa0f16d6b610ba639ad3911661a0479082d8fd6c 100644 (file)
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 #include "au8522.h"
@@ -65,10 +66,7 @@ struct au8522_state {
        int aud_input;
        u32 id;
        u32 rev;
-       u8 brightness;
-       u8 contrast;
-       u8 saturation;
-       s16 hue;
+       struct v4l2_ctrl_handler hdl;
 };
 
 /* These are routines shared by both the VSB/QAM demodulator and the analog