V4L/DVB (8031): Anysee: support for Anysee E30C Plus rev 0.4

- support for Anysee E30C Plus rev 0.4
 - set IO port E
 - set correct TS mode
- change deltaf according to latest Windows driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index dada92a14cf3b49acf0a535dfd1cb1a10063c2d6..a3f9bbc355bbc8c5e6b5c368482b9c03b9cc7663 100644 (file)
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -227,7 +227,8 @@ static struct tda10023_config anysee_tda10023_config = {
        .pll_m  = 11,
        .pll_p  = 3,
        .pll_n  = 1,
-       .deltaf = 0xfed6,
+       .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
+       .deltaf = 0xfeeb,
 };
 
 static struct mt352_config anysee_mt352_config = {
@@ -272,8 +273,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
           1. E30        MT352     02  0.2.1
           2. E30        ZL10353   02  0.2.1
           3. E30 Plus   ZL10353   06  0.1.0
-          4. E30C Plus  TDA10023  0a  0.1.0
-             E30C Plus  TDA10023  0f  0.1.2 (not working)
+          4. E30C Plus  TDA10023  0a  0.1.0    rev 0.2
+          4. E30C Plus  TDA10023  0f  0.1.2    rev 0.4
        */
 
        /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
@@ -305,13 +306,10 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
                return 0;
        }
 
-       /* known not working (E30C Plus v0.1.2) */
-       if (hw_info[0] == 0x0f) {
-               info("this version of Anysee is not supported yet");
-               /* return IO port D to init value for safe */
-               ret = anysee_write_reg(adap->dev, 0xb0, io_d);
-               return -ENODEV;
-       }
+       /* IO port E - E30C rev 0.4 board requires this */
+       ret = anysee_write_reg(adap->dev, 0xb1, 0xa7);
+       if (ret)
+               return ret;
 
        /* Philips TDA10023 DVB-C demod */
        adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,