ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequen...

Extended testing has shown that the imx ahci driver sometimes requires
more than the 100 attempts currently alotted in the driver to perform a
successful temperature reading when running at minimum (throttled) CPU
frequency.

Debugging suggests that the read cycle can take 160 attempts (which given
that the driver averages 80 readings from the ADC equates to one failure
on each read).

Increase the attempt limit to 200 in order to greatly reduce the
likelihood of the driver failing to perform a temperature reading,
especially at low CPU frequency.

Signed-off-by: Egor Starkov <egor.starkov@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>

diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 787567e840bd776b32415c481124b8d153becc5c..a58bcc069c54f5a6dcc4ccca7e7821f4163bd279 100644 (file)
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -230,7 +230,7 @@ static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio)
 {
        u16 adc_out_reg, read_sum;
        u32 index, read_attempt;
-       const u32 attempt_limit = 100;
+       const u32 attempt_limit = 200;
 
        imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
        imx_phy_reg_write(rtune_ctl_reg, mmio);