#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
#include <linux/platform_data/at24.h>
#include <linux/pm_runtime.h>
* which won't work on pure SMBus systems.
*/
+struct at24_client {
+ struct i2c_client *client;
+ struct regmap *regmap;
+};
+
struct at24_data {
struct at24_platform_data chip;
int use_smbus;
* Some chips tie up multiple I2C addresses; dummy devices reserve
* them for us, and we'll use them with SMBus calls.
*/
- struct i2c_client *client[];
+ struct at24_client client[];
};
/*
*offset &= 0xff;
}
- return at24->client[i];
+ return at24->client[i].client;
}
static ssize_t at24_eeprom_read_smbus(struct at24_data *at24, char *buf,
static int at24_read(void *priv, unsigned int off, void *val, size_t count)
{
struct at24_data *at24 = priv;
- struct device *dev = &at24->client[0]->dev;
+ struct device *dev = &at24->client[0].client->dev;
char *buf = val;
int ret;
static int at24_write(void *priv, unsigned int off, void *val, size_t count)
{
struct at24_data *at24 = priv;
- struct device *dev = &at24->client[0]->dev;
+ struct device *dev = &at24->client[0].client->dev;
char *buf = val;
int ret;
}
}
+static const struct regmap_config regmap_config_8 = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct regmap_config regmap_config_16 = {
+ .reg_bits = 16,
+ .val_bits = 8,
+};
+
static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct at24_platform_data chip;
struct at24_data *at24;
int err;
unsigned i, num_addresses;
+ const struct regmap_config *config;
u8 test_byte;
if (client->dev.platform_data) {
num_addresses = DIV_ROUND_UP(chip.byte_len,
(chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+ if (chip.flags & AT24_FLAG_ADDR16)
+ config = ®map_config_16;
+ else
+ config = ®map_config_8;
+
at24 = devm_kzalloc(&client->dev, sizeof(struct at24_data) +
- num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
+ num_addresses * sizeof(struct at24_client), GFP_KERNEL);
if (!at24)
return -ENOMEM;
at24->chip = chip;
at24->num_addresses = num_addresses;
+ at24->client[0].client = client;
+ at24->client[0].regmap = devm_regmap_init_i2c(client, config);
+ if (IS_ERR(at24->client[0].regmap))
+ return PTR_ERR(at24->client[0].regmap);
+
if ((chip.flags & AT24_FLAG_SERIAL) && (chip.flags & AT24_FLAG_MAC)) {
dev_err(&client->dev,
"invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC.");
}
}
- at24->client[0] = client;
-
/* use dummy devices for multiple-address chips */
for (i = 1; i < num_addresses; i++) {
- at24->client[i] = i2c_new_dummy(client->adapter,
- client->addr + i);
- if (!at24->client[i]) {
+ at24->client[i].client = i2c_new_dummy(client->adapter,
+ client->addr + i);
+ if (!at24->client[i].client) {
dev_err(&client->dev, "address 0x%02x unavailable\n",
client->addr + i);
err = -EADDRINUSE;
goto err_clients;
}
+ at24->client[i].regmap = devm_regmap_init_i2c(
+ at24->client[i].client, config);
+ if (IS_ERR(at24->client[i].regmap)) {
+ err = PTR_ERR(at24->client[i].regmap);
+ goto err_clients;
+ }
}
i2c_set_clientdata(client, at24);
err_clients:
for (i = 1; i < num_addresses; i++)
- if (at24->client[i])
- i2c_unregister_device(at24->client[i]);
+ if (at24->client[i].client)
+ i2c_unregister_device(at24->client[i].client);
pm_runtime_disable(&client->dev);
nvmem_unregister(at24->nvmem);
for (i = 1; i < at24->num_addresses; i++)
- i2c_unregister_device(at24->client[i]);
+ i2c_unregister_device(at24->client[i].client);
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);