[SCSI] lpfc 8.1.1 : Bring model descriptions in sync with Emulex standard generic...

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4f0029301412d62661eff981fceaaa068028eb65..1ea565e0561ffe0432fed2e751a59f21e6ea5d8f 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1054,6 +1054,12 @@ typedef struct {
 #define PCI_DEVICE_ID_ZEPHYR_SCSP   0xfe11
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
 
+#define PCI_SUBSYSTEM_ID_LP11000S      0xfc11
+#define PCI_SUBSYSTEM_ID_LP11002S      0xfc12
+#define PCI_SUBSYSTEM_ID_LPE11000S     0xfc21
+#define PCI_SUBSYSTEM_ID_LPE11002S     0xfc22
+#define PCI_SUBSYSTEM_ID_LPE11010S     0xfc2A
+
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
 #define SUPERFLY_JEDEC_ID           0x0020

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 1ab3dac7b632b329f1e32305de3bbeb38d513adf..766dac230a6c6f795a7b2e106d6944b7c0910cb0 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -760,8 +760,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
 {
        lpfc_vpd_t *vp;
        uint16_t dev_id;
+       uint16_t dev_subid;
        uint8_t hdrtype;
-       char str[16];
+       char *model_str = "";
 
        vp = &phba->vpd;
        pci_read_config_word(phba->pcidev, PCI_DEVICE_ID, &dev_id);
@@ -769,122 +770,132 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
 
        switch (dev_id) {
        case PCI_DEVICE_ID_FIREFLY:
-               strcpy(str, "LP6000 1");
+               model_str = "LP6000 1Gb PCI";
                break;
        case PCI_DEVICE_ID_SUPERFLY:
                if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
-                       strcpy(str, "LP7000 1");
+                       model_str = "LP7000 1Gb PCI";
                else
-                       strcpy(str, "LP7000E 1");
+                       model_str = "LP7000E 1Gb PCI";
                break;
        case PCI_DEVICE_ID_DRAGONFLY:
-               strcpy(str, "LP8000 1");
+               model_str = "LP8000 1Gb PCI";
                break;
        case PCI_DEVICE_ID_CENTAUR:
                if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
-                       strcpy(str, "LP9002 2");
+                       model_str = "LP9002 2Gb PCI";
                else
-                       strcpy(str, "LP9000 1");
+                       model_str = "LP9000 1Gb PCI";
                break;
        case PCI_DEVICE_ID_RFLY:
-               strcpy(str, "LP952 2");
+               model_str = "LP952 2Gb PCI";
                break;
        case PCI_DEVICE_ID_PEGASUS:
-               strcpy(str, "LP9802 2");
+               model_str = "LP9802 2Gb PCI-X";
                break;
        case PCI_DEVICE_ID_THOR:
                if (hdrtype == 0x80)
-                       strcpy(str, "LP10000DC 2");
+                       model_str = "LP10000DC 2Gb 2-port PCI-X";
                else
-                       strcpy(str, "LP10000 2");
+                       model_str = "LP10000 2Gb PCI-X";
                break;
        case PCI_DEVICE_ID_VIPER:
-               strcpy(str, "LPX1000 10");
+               model_str = "LPX1000 10Gb PCI-X";
                break;
        case PCI_DEVICE_ID_PFLY:
-               strcpy(str, "LP982 2");
+               model_str = "LP982 2Gb PCI-X";
                break;
        case PCI_DEVICE_ID_TFLY:
                if (hdrtype == 0x80)
-                       strcpy(str, "LP1050DC 2");
+                       model_str = "LP1050DC 2Gb 2-port PCI-X";
                else
-                       strcpy(str, "LP1050 2");
+                       model_str = "LP1050 2Gb PCI-X";
                break;
        case PCI_DEVICE_ID_HELIOS:
                if (hdrtype == 0x80)
-                       strcpy(str, "LP11002 4");
+                       model_str = "LP11002 4Gb 2-port PCI-X2";
                else
-                       strcpy(str, "LP11000 4");
+                       model_str = "LP11000 4Gb PCI-X2";
                break;
        case PCI_DEVICE_ID_HELIOS_SCSP:
-               strcpy(str, "LP11000-SP 4");
+               model_str = "LP11000-SP 4Gb PCI-X2";
                break;
        case PCI_DEVICE_ID_HELIOS_DCSP:
-               strcpy(str, "LP11002-SP 4");
+               model_str = "LP11002-SP 4Gb 2-port PCI-X2";
                break;
        case PCI_DEVICE_ID_NEPTUNE:
                if (hdrtype == 0x80)
-                       strcpy(str, "LPe1002 4");
+                       model_str = "LPe1002 4Gb 2-port";
                else
-                       strcpy(str, "LPe1000 4");
+                       model_str = "LPe1000 4Gb PCIe";
                break;
        case PCI_DEVICE_ID_NEPTUNE_SCSP:
-               strcpy(str, "LPe1000-SP 4");
+               model_str = "LPe1000-SP 4Gb PCIe";
                break;
        case PCI_DEVICE_ID_NEPTUNE_DCSP:
-               strcpy(str, "LPe1002-SP 4");
+               model_str = "LPe1002-SP 4Gb 2-port PCIe";
                break;
        case PCI_DEVICE_ID_BMID:
-               strcpy(str, "LP1150 4");
+               model_str = "LP1150 4Gb PCI-X2";
                break;
        case PCI_DEVICE_ID_BSMB:
-               strcpy(str, "LP111 4");
+               model_str = "LP111 4Gb PCI-X2";
                break;
        case PCI_DEVICE_ID_ZEPHYR:
                if (hdrtype == 0x80)
-                       strcpy(str, "LPe11002 4");
+                       model_str = "LPe11002 4Gb 2-port PCIe";
                else
-                       strcpy(str, "LPe11000 4");
+                       model_str = "LPe11000 4Gb PCIe";
                break;
        case PCI_DEVICE_ID_ZEPHYR_SCSP:
-               strcpy(str, "LPe11000-SP 4");
+               model_str = "LPe11000-SP 4Gb PCIe";
                break;
        case PCI_DEVICE_ID_ZEPHYR_DCSP:
-               strcpy(str, "LPe11002-SP 4");
+               model_str = "LPe11002-SP 4Gb 2-port PCIe";
                break;
        case PCI_DEVICE_ID_ZMID:
-               strcpy(str, "LPe1150 4");
+               model_str = "LPe1150 4Gb PCIe";
                break;
        case PCI_DEVICE_ID_ZSMB:
-               strcpy(str, "LPe111 4");
+               model_str = "LPe111 4Gb PCIe";
                break;
        case PCI_DEVICE_ID_LP101:
-               strcpy(str, "LP101 2");
+               model_str = "LP101 2Gb PCI-X";
                break;
        case PCI_DEVICE_ID_LP10000S:
-               strcpy(str, "LP10000-S 2");
-               break;
-       default:
-               memset(str, 0, 16);
+               model_str = "LP10000-S 2Gb PCI";
                break;
        case PCI_DEVICE_ID_LP11000S:
-               if (hdrtype == 0x80)
-                       strcpy(str, "LP11002-S 4");
-               else
-                       strcpy(str, "LP11000-S 4");
-               break;
        case PCI_DEVICE_ID_LPE11000S:
-               if (hdrtype == 0x80)
-                       strcpy(str, "LPe11002-S 4");
-               else
-                       strcpy(str, "LPe11000-S 4");
+               pci_read_config_word(phba->pcidev, PCI_SUBSYSTEM_ID,
+                                    &dev_subid);
+               switch (dev_subid) {
+               case PCI_SUBSYSTEM_ID_LP11000S:
+                       model_str = "LP11002-S 4Gb PCI-X2";
+                       break;
+               case PCI_SUBSYSTEM_ID_LP11002S:
+                       model_str = "LP11000-S 4Gb 2-port PCI-X2";
+                       break;
+               case PCI_SUBSYSTEM_ID_LPE11000S:
+                       model_str = "LPe11002-S 4Gb PCIe";
+                       break;
+               case PCI_SUBSYSTEM_ID_LPE11002S:
+                       model_str = "LPe11002-S 4Gb 2-port PCIe";
+                       break;
+               case PCI_SUBSYSTEM_ID_LPE11010S:
+                       model_str = "LPe11010-S 4Gb 10-port PCIe";
+                       break;
+               default:
+                       break;
+               }
+               break;
+       default:
                break;
        }
        if (mdp)
-               sscanf(str, "%s", mdp);
+               sscanf(model_str, "%s", mdp);
        if (descp)
-               sprintf(descp, "Emulex LightPulse %s Gigabit PCI Fibre "
-                       "Channel Adapter", str);
+               sprintf(descp, "Emulex %s Fibre Channel Adapter", model_str);
 }
 
 /**************************************************/