mwl8k: report rate and other information for received frames

When receiving a frame, report the antenna info, long/short preamble
status, 20/40 MHz flag, long/short guard interval status, MCS/legacy
rate status, and MCS/legacy rate index to the stack.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 76c9263f70ace44d4a4c1fae88d322b8cc67702c..75c9261abad85fc2b3c1f5c9e743503bc1e49674 100644 (file)
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -169,7 +169,7 @@ struct mwl8k_priv {
        /* PHY parameters */
        struct ieee80211_supported_band band;
        struct ieee80211_channel channels[14];
-       struct ieee80211_rate rates[12];
+       struct ieee80211_rate rates[13];
 
        bool radio_on;
        bool radio_short_preamble;
@@ -208,7 +208,7 @@ struct mwl8k_vif {
         * Subset of supported legacy rates.
         * Intersection of AP and STA supported rates.
         */
-       struct ieee80211_rate legacy_rates[12];
+       struct ieee80211_rate legacy_rates[13];
 
        /* number of supported legacy rates */
        u8      legacy_nrates;
@@ -240,9 +240,10 @@ static const struct ieee80211_rate mwl8k_rates[] = {
        { .bitrate = 10, .hw_value = 2, },
        { .bitrate = 20, .hw_value = 4, },
        { .bitrate = 55, .hw_value = 11, },
+       { .bitrate = 110, .hw_value = 22, },
+       { .bitrate = 220, .hw_value = 44, },
        { .bitrate = 60, .hw_value = 12, },
        { .bitrate = 90, .hw_value = 18, },
-       { .bitrate = 110, .hw_value = 22, },
        { .bitrate = 120, .hw_value = 24, },
        { .bitrate = 180, .hw_value = 36, },
        { .bitrate = 240, .hw_value = 48, },
@@ -601,7 +602,7 @@ struct ewc_ht_info {
 /* Peer Entry flags - used to define the type of the peer node */
 #define MWL8K_PEER_TYPE_ACCESSPOINT    2
 
-#define MWL8K_IEEE_LEGACY_DATA_RATES   12
+#define MWL8K_IEEE_LEGACY_DATA_RATES   13
 #define MWL8K_MCS_BITMAP_SIZE          16
 
 struct peer_capability_info {
@@ -751,6 +752,13 @@ struct mwl8k_rx_desc {
 #define MWL8K_RX_DESCS         256
 #define MWL8K_RX_MAXSZ         3800
 
+#define RATE_INFO_SHORTPRE             0x8000
+#define RATE_INFO_ANTSELECT(x)         (((x) >> 11) & 0x3)
+#define RATE_INFO_RATEID(x)            (((x) >> 3) & 0x3f)
+#define RATE_INFO_40MHZ                        0x0004
+#define RATE_INFO_SHORTGI              0x0002
+#define RATE_INFO_MCS_FORMAT           0x0001
+
 static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index)
 {
        struct mwl8k_priv *priv = hw->priv;
@@ -907,6 +915,7 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
                struct ieee80211_rx_status status;
                unsigned long addr;
                struct ieee80211_hdr *wh;
+               u16 rate_info;
 
                rx_desc = rxq->rx_desc_area + rxq->rx_head;
                if (!(rx_desc->rx_ctrl & MWL8K_RX_CTRL_OWNED_BY_HOST))
@@ -938,14 +947,24 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
                if (mwl8k_capture_bssid(priv, wh))
                        mwl8k_save_beacon(hw, skb);
 
+               rate_info = le16_to_cpu(rx_desc->rate_info);
+
                memset(&status, 0, sizeof(status));
                status.mactime = 0;
                status.signal = -rx_desc->rssi;
                status.noise = -rx_desc->noise_level;
                status.qual = rx_desc->link_quality;
-               status.antenna = 1;
-               status.rate_idx = 1;
+               status.antenna = RATE_INFO_ANTSELECT(rate_info);
+               status.rate_idx = RATE_INFO_RATEID(rate_info);
                status.flag = 0;
+               if (rate_info & RATE_INFO_SHORTPRE)
+                       status.flag |= RX_FLAG_SHORTPRE;
+               if (rate_info & RATE_INFO_40MHZ)
+                       status.flag |= RX_FLAG_40MHZ;
+               if (rate_info & RATE_INFO_SHORTGI)
+                       status.flag |= RX_FLAG_SHORT_GI;
+               if (rate_info & RATE_INFO_MCS_FORMAT)
+                       status.flag |= RX_FLAG_HT;
                status.band = IEEE80211_BAND_2GHZ;
                status.freq = ieee80211_channel_to_frequency(rx_desc->channel);
                memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));