core-$(CONFIG_M68EZ328) += arch/m68k/platform/68EZ328/
core-$(CONFIG_M68VZ328) += arch/m68k/platform/68VZ328/
core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/
-core-$(CONFIG_M527x) += arch/m68k/platform/527x/
core-$(CONFIG_M528x) += arch/m68k/platform/528x/
core-$(CONFIG_M5307) += arch/m68k/platform/5307/
core-$(CONFIG_M532x) += arch/m68k/platform/532x/
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this, which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o
-
+++ /dev/null
-/***************************************************************************/
-
-/*
- * linux/arch/m68knommu/platform/527x/config.c
- *
- * Sub-architcture dependent initialization code for the Freescale
- * 5270/5271 CPUs.
- *
- * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-#if defined(CONFIG_M5271)
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(ADDR, 13, 3),
- MCFGPF(DATAH, 16, 8),
- MCFGPF(DATAL, 24, 8),
- MCFGPF(BUSCTL, 32, 8),
- MCFGPF(BS, 40, 4),
- MCFGPF(CS, 49, 7),
- MCFGPF(SDRAM, 56, 6),
- MCFGPF(FECI2C, 64, 4),
- MCFGPF(UARTH, 72, 2),
- MCFGPF(UARTL, 80, 8),
- MCFGPF(QSPI, 88, 5),
- MCFGPF(TIMER, 96, 8),
-#elif defined(CONFIG_M5275)
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(BUSCTL, 8, 8),
- MCFGPF(ADDR, 21, 3),
- MCFGPF(CS, 25, 7),
- MCFGPF(FEC0H, 32, 8),
- MCFGPF(FEC0L, 40, 8),
- MCFGPF(FECI2C, 48, 6),
- MCFGPF(QSPI, 56, 7),
- MCFGPF(SDRAM, 64, 8),
- MCFGPF(TIMERH, 72, 4),
- MCFGPF(TIMERL, 80, 4),
- MCFGPF(UARTL, 88, 8),
- MCFGPF(FEC1H, 96, 8),
- MCFGPF(FEC1L, 104, 8),
- MCFGPF(BS, 114, 2),
- MCFGPF(IRQ, 121, 7),
- MCFGPF(USBH, 128, 1),
- MCFGPF(USBL, 136, 8),
- MCFGPF(UARTH, 144, 4),
-#endif
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m527x_qspi_init(void)
-{
-#if defined(CONFIG_M5271)
- u16 par;
-
- /* setup QSPS pins for QSPI with gpio CS control */
- writeb(0x1f, MCFGPIO_PAR_QSPI);
- /* and CS2 & CS3 as gpio */
- par = readw(MCFGPIO_PAR_TIMER);
- par &= 0x3f3f;
- writew(par, MCFGPIO_PAR_TIMER);
-#elif defined(CONFIG_M5275)
- /* setup QSPS pins for QSPI with gpio CS control */
- writew(0x003e, MCFGPIO_PAR_QSPI);
-#endif
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m527x_uarts_init(void)
-{
- u16 sepmask;
-
- /*
- * External Pin Mask Setting & Enable External Pin for Interface
- */
- sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
- sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
- writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
-}
-
-/***************************************************************************/
-
-static void __init m527x_fec_init(void)
-{
- u16 par;
- u8 v;
-
- /* Set multi-function pins to ethernet mode for fec0 */
-#if defined(CONFIG_M5271)
- v = readb(MCF_IPSBAR + 0x100047);
- writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
-#else
- par = readw(MCF_IPSBAR + 0x100082);
- writew(par | 0xf00, MCF_IPSBAR + 0x100082);
- v = readb(MCF_IPSBAR + 0x100078);
- writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
-
- /* Set multi-function pins to ethernet mode for fec1 */
- par = readw(MCF_IPSBAR + 0x100082);
- writew(par | 0xa0, MCF_IPSBAR + 0x100082);
- v = readb(MCF_IPSBAR + 0x100079);
- writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
-#endif
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
- mach_sched_init = hw_timer_init;
- m527x_uarts_init();
- m527x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
- m527x_qspi_init();
-#endif
-}
-
-/***************************************************************************/
obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M527x) += pit.o intc-2.o reset.o
+obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
obj-$(CONFIG_M528x) += pit.o intc-2.o reset.o
obj-$(CONFIG_M5307) += timers.o intc.o reset.o
--- /dev/null
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/527x/config.c
+ *
+ * Sub-architcture dependent initialization code for the Freescale
+ * 5270/5271 CPUs.
+ *
+ * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+#if defined(CONFIG_M5271)
+ MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPF(ADDR, 13, 3),
+ MCFGPF(DATAH, 16, 8),
+ MCFGPF(DATAL, 24, 8),
+ MCFGPF(BUSCTL, 32, 8),
+ MCFGPF(BS, 40, 4),
+ MCFGPF(CS, 49, 7),
+ MCFGPF(SDRAM, 56, 6),
+ MCFGPF(FECI2C, 64, 4),
+ MCFGPF(UARTH, 72, 2),
+ MCFGPF(UARTL, 80, 8),
+ MCFGPF(QSPI, 88, 5),
+ MCFGPF(TIMER, 96, 8),
+#elif defined(CONFIG_M5275)
+ MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPF(BUSCTL, 8, 8),
+ MCFGPF(ADDR, 21, 3),
+ MCFGPF(CS, 25, 7),
+ MCFGPF(FEC0H, 32, 8),
+ MCFGPF(FEC0L, 40, 8),
+ MCFGPF(FECI2C, 48, 6),
+ MCFGPF(QSPI, 56, 7),
+ MCFGPF(SDRAM, 64, 8),
+ MCFGPF(TIMERH, 72, 4),
+ MCFGPF(TIMERL, 80, 4),
+ MCFGPF(UARTL, 88, 8),
+ MCFGPF(FEC1H, 96, 8),
+ MCFGPF(FEC1L, 104, 8),
+ MCFGPF(BS, 114, 2),
+ MCFGPF(IRQ, 121, 7),
+ MCFGPF(USBH, 128, 1),
+ MCFGPF(USBL, 136, 8),
+ MCFGPF(UARTH, 144, 4),
+#endif
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m527x_qspi_init(void)
+{
+#if defined(CONFIG_M5271)
+ u16 par;
+
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writeb(0x1f, MCFGPIO_PAR_QSPI);
+ /* and CS2 & CS3 as gpio */
+ par = readw(MCFGPIO_PAR_TIMER);
+ par &= 0x3f3f;
+ writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m527x_uarts_init(void)
+{
+ u16 sepmask;
+
+ /*
+ * External Pin Mask Setting & Enable External Pin for Interface
+ */
+ sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
+ writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+}
+
+/***************************************************************************/
+
+static void __init m527x_fec_init(void)
+{
+ u16 par;
+ u8 v;
+
+ /* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+ v = readb(MCF_IPSBAR + 0x100047);
+ writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
+ par = readw(MCF_IPSBAR + 0x100082);
+ writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+ v = readb(MCF_IPSBAR + 0x100078);
+ writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+
+ /* Set multi-function pins to ethernet mode for fec1 */
+ par = readw(MCF_IPSBAR + 0x100082);
+ writew(par | 0xa0, MCF_IPSBAR + 0x100082);
+ v = readb(MCF_IPSBAR + 0x100079);
+ writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
+#endif
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+ m527x_uarts_init();
+ m527x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m527x_qspi_init();
+#endif
+}
+
+/***************************************************************************/
projects / openwrt / staging / blogic.git / commitdiff