mlxsw: reg: Add high and low temperature thresholds

The ASIC has the ability to generate events whenever a sensor indicates
the temperature goes above or below its high or low thresholds,
respectively.

In new firmware versions the firmware enforces a minimum of 5
degrees Celsius difference between both thresholds. Make the driver
conform to this requirement.

Note that this is required even when the events are disabled, as in
certain systems interrupts are generated via GPIO based on these
thresholds.

Fixes: 85926f877040 ("mlxsw: reg: Add definition of temperature management registers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 4afc8486eb9a7ee5242d58393fbba643e2b75d74..5acfbe5b8b9d2f51f49a403e04f9e75314e1df49 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -5827,6 +5827,29 @@ MLXSW_ITEM32(reg, mtmp, mtr, 0x08, 30, 1);
  */
 MLXSW_ITEM32(reg, mtmp, max_temperature, 0x08, 0, 16);
 
+/* reg_mtmp_tee
+ * Temperature Event Enable.
+ * 0 - Do not generate event
+ * 1 - Generate event
+ * 2 - Generate single event
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtmp, tee, 0x0C, 30, 2);
+
+#define MLXSW_REG_MTMP_THRESH_HI 0x348 /* 105 Celsius */
+
+/* reg_mtmp_temperature_threshold_hi
+ * High threshold for Temperature Warning Event. In 0.125 Celsius.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtmp, temperature_threshold_hi, 0x0C, 0, 16);
+
+/* reg_mtmp_temperature_threshold_lo
+ * Low threshold for Temperature Warning Event. In 0.125 Celsius.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtmp, temperature_threshold_lo, 0x10, 0, 16);
+
 #define MLXSW_REG_MTMP_SENSOR_NAME_SIZE 8
 
 /* reg_mtmp_sensor_name
@@ -5843,6 +5866,8 @@ static inline void mlxsw_reg_mtmp_pack(char *payload, u8 sensor_index,
        mlxsw_reg_mtmp_sensor_index_set(payload, sensor_index);
        mlxsw_reg_mtmp_mte_set(payload, max_temp_enable);
        mlxsw_reg_mtmp_mtr_set(payload, max_temp_reset);
+       mlxsw_reg_mtmp_temperature_threshold_hi_set(payload,
+                                                   MLXSW_REG_MTMP_THRESH_HI);
 }
 
 static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp,