mtd: nand: davinci: add comment on NAND subpage write status on keystone

Add a comment clarifying that NAND subpage write on keystone works,
but is not being enabled in the interest of backward compatibility.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 27fa8b87cd5fc6a779e0509ce78c010527747268..531c51991e5747b35fc68114ace9d534a1ea430e 100644 (file)
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -581,6 +581,17 @@ static struct davinci_nand_pdata
                        "ti,davinci-nand-use-bbt"))
                        pdata->bbt_options = NAND_BBT_USE_FLASH;
 
+               /*
+                * Since kernel v4.8, this driver has been fixed to enable
+                * use of 4-bit hardware ECC with subpages and verified on
+                * TI's keystone EVMs (K2L, K2HK and K2E).
+                * However, in the interest of not breaking systems using
+                * existing UBI partitions, sub-page writes are not being
+                * (re)enabled. If you want to use subpage writes on Keystone
+                * platforms (i.e. do not have any existing UBI partitions),
+                * then use "ti,davinci-nand" as the compatible in your
+                * device-tree file.
+                */
                if (of_device_is_compatible(pdev->dev.of_node,
                                            "ti,keystone-nand")) {
                        pdata->options |= NAND_NO_SUBPAGE_WRITE;