UBI: re-name set volume properties ioctl

Rename the ioctl which sets volume properties from 'UBI_IOCSETPROP' to
'UBI_IOCSETVOLPROP' to reflect the fact that this ioctl is about volume
properties, not device properties. This is also consistent with the
other volume ioctl name - 'UBI_IOCVOLUP'.

The main motivation for the re-name, however, is that we are going
to introduce the per-UBI device "set properties" ioctl, so we need
good and logical naming.

At the same time, re-name the "set volume properties request" data
structure from 'struct ubi_set_prop_req' to
'struct ubi_set_vol_prop_req'.

And re-name 'UBI_PROP_DIRECT_WRITE' to 'UBI_VOL_PROP_DIRECT_WRITE'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 9a1703286411a54ae8a8882f8f3d668a28392793..4119cb857c97d442a9a204a155694ad607877c89 100644 (file)
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -561,18 +561,18 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
        }
 
        /* Set volume property command */
-       case UBI_IOCSETPROP:
+       case UBI_IOCSETVOLPROP:
        {
-               struct ubi_set_prop_req req;
+               struct ubi_set_vol_prop_req req;
 
                err = copy_from_user(&req, argp,
-                               sizeof(struct ubi_set_prop_req));
+                                    sizeof(struct ubi_set_vol_prop_req));
                if (err) {
                        err = -EFAULT;
                        break;
                }
                switch (req.property) {
-               case UBI_PROP_DIRECT_WRITE:
+               case UBI_VOL_PROP_DIRECT_WRITE:
                        mutex_lock(&ubi->device_mutex);
                        desc->vol->direct_writes = !!req.value;
                        mutex_unlock(&ubi->device_mutex);

diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index c0d47ad4b103b5a502cf98230f3d52da3e38d74b..8d8484b1ed463005c73525e557a2dacd050002ea 100644 (file)
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -131,7 +131,7 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~
  *
  * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be
- * used. A pointer to a &struct ubi_set_prop_req object is expected to be
+ * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
  * passed. The object describes which property should be set, and to which value
  * it should be set.
  */
@@ -186,7 +186,8 @@
 /* Check if LEB is mapped command */
 #define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, __s32)
 /* Set an UBI volume property */
-#define UBI_IOCSETPROP _IOW(UBI_VOL_IOC_MAGIC, 6, struct ubi_set_prop_req)
+#define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
+                              struct ubi_set_vol_prop_req)
 
 /* Maximum MTD device name length supported by UBI */
 #define MAX_UBI_MTD_NAME_LEN 127
@@ -225,11 +226,11 @@ enum {
 /*
  * UBI set property ioctl constants
  *
- * @UBI_PROP_DIRECT_WRITE: allow / disallow user to directly write and
- *                         erase individual eraseblocks on dynamic volumes
+ * @UBI_VOL_PROP_DIRECT_WRITE: allow / disallow user to directly write and
+ *                             erase individual eraseblocks on dynamic volumes
  */
 enum {
-       UBI_PROP_DIRECT_WRITE = 1,
+       UBI_VOL_PROP_DIRECT_WRITE = 1,
 };
 
 /**
@@ -397,13 +398,13 @@ struct ubi_map_req {
 
 
 /**
- * struct ubi_set_prop_req - a data structure used to set an ubi volume
- *                           property.
- * @property: property to set (%UBI_PROP_DIRECT_WRITE)
+ * struct ubi_set_vol_prop_req - a data structure used to set an ubi volume
+ *                               property.
+ * @property: property to set (%UBI_VOL_PROP_DIRECT_WRITE)
  * @padding: reserved for future, not used, has to be zeroed
  * @value: value to set
  */
-struct ubi_set_prop_req {
+struct ubi_set_vol_prop_req {
        __u8  property;
        __u8  padding[7];
        __u64 value;