mmc: jz4740: Set clock rate to mmc->f_max rather than JZ_MMC_CLK_RATE

The maximum clock rate can be overridden by DT. The clock rate should
be set to the DT-specified value rather than the constant JZ_MMC_CLK_RATE
when this is done. If the maximum clock rate is not set by DT then
mmc->f_max will be set to JZ_MMC_CLK_RATE.

Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 03757cc55f528da50064b56b97a6b31b801af512..aa635b458d2c9e024a0ae1b7758c8d72d067cebc 100644 (file)
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -825,7 +825,7 @@ static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate)
        int real_rate;
 
        jz4740_mmc_clock_disable(host);
-       clk_set_rate(host->clk, JZ_MMC_CLK_RATE);
+       clk_set_rate(host->clk, host->mmc->f_max);
 
        real_rate = clk_get_rate(host->clk);