zram: cosmetic: cleanup documentation

zram documentation is a mix of different styles: spaces, tabs, tabs +
spaces, etc.  Clean it up.

Link: http://lkml.kernel.org/r/20160531122017.2878-6-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt
index 7c05357360a763371fd4396b049f48092815797d..0535ae1f73e53e6e85a64a37cc7f05e9418adb7d 100644 (file)
--- a/Documentation/blockdev/zram.txt
+++ b/Documentation/blockdev/zram.txt
@@ -59,23 +59,23 @@ num_devices parameter is optional and tells zram how many devices should be
 pre-created. Default: 1.
 
 2) Set max number of compression streams
-       Regardless the value passed to this attribute, ZRAM will always
-       allocate multiple compression streams - one per online CPUs - thus
-       allowing several concurrent compression operations. The number of
-       allocated compression streams goes down when some of the CPUs
-       become offline. There is no single-compression-stream mode anymore,
-       unless you are running a UP system or has only 1 CPU online.
-
-       To find out how many streams are currently available:
+Regardless the value passed to this attribute, ZRAM will always
+allocate multiple compression streams - one per online CPUs - thus
+allowing several concurrent compression operations. The number of
+allocated compression streams goes down when some of the CPUs
+become offline. There is no single-compression-stream mode anymore,
+unless you are running a UP system or has only 1 CPU online.
+
+To find out how many streams are currently available:
        cat /sys/block/zram0/max_comp_streams
 
 3) Select compression algorithm
-       Using comp_algorithm device attribute one can see available and
-       currently selected (shown in square brackets) compression algorithms,
-       change selected compression algorithm (once the device is initialised
-       there is no way to change compression algorithm).
+Using comp_algorithm device attribute one can see available and
+currently selected (shown in square brackets) compression algorithms,
+change selected compression algorithm (once the device is initialised
+there is no way to change compression algorithm).
 
-       Examples:
+Examples:
        #show supported compression algorithms
        cat /sys/block/zram0/comp_algorithm
        lzo [lz4]
@@ -83,28 +83,27 @@ pre-created. Default: 1.
        #select lzo compression algorithm
        echo lzo > /sys/block/zram0/comp_algorithm
 
-       For the time being, the `comp_algorithm' content does not necessarily
-       show every compression algorithm supported by the kernel. We keep this
-       list primarily to simplify device configuration and one can configure
-       a new device with a compression algorithm that is not listed in
-       `comp_algorithm'. The thing is that, internally, ZRAM uses Crypto API
-       and, if some of the algorithms were built as modules, it's impossible
-       to list all of them using, for instance, /proc/crypto or any other
-       method. This, however, has an advantage of permitting the usage of
-       custom crypto compression modules (implementing S/W or H/W
-       compression).
+For the time being, the `comp_algorithm' content does not necessarily
+show every compression algorithm supported by the kernel. We keep this
+list primarily to simplify device configuration and one can configure
+a new device with a compression algorithm that is not listed in
+`comp_algorithm'. The thing is that, internally, ZRAM uses Crypto API
+and, if some of the algorithms were built as modules, it's impossible
+to list all of them using, for instance, /proc/crypto or any other
+method. This, however, has an advantage of permitting the usage of
+custom crypto compression modules (implementing S/W or H/W compression).
 
 4) Set Disksize
-        Set disk size by writing the value to sysfs node 'disksize'.
-        The value can be either in bytes or you can use mem suffixes.
-        Examples:
-            # Initialize /dev/zram0 with 50MB disksize
-            echo $((50*1024*1024)) > /sys/block/zram0/disksize
+Set disk size by writing the value to sysfs node 'disksize'.
+The value can be either in bytes or you can use mem suffixes.
+Examples:
+       # Initialize /dev/zram0 with 50MB disksize
+       echo $((50*1024*1024)) > /sys/block/zram0/disksize
 
-            # Using mem suffixes
-            echo 256K > /sys/block/zram0/disksize
-            echo 512M > /sys/block/zram0/disksize
-            echo 1G > /sys/block/zram0/disksize
+       # Using mem suffixes
+       echo 256K > /sys/block/zram0/disksize
+       echo 512M > /sys/block/zram0/disksize
+       echo 1G > /sys/block/zram0/disksize
 
 Note:
 There is little point creating a zram of greater than twice the size of memory
@@ -112,20 +111,20 @@ since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the
 size of the disk when not in use so a huge zram is wasteful.
 
 5) Set memory limit: Optional
-       Set memory limit by writing the value to sysfs node 'mem_limit'.
-       The value can be either in bytes or you can use mem suffixes.
-       In addition, you could change the value in runtime.
-       Examples:
-           # limit /dev/zram0 with 50MB memory
-           echo $((50*1024*1024)) > /sys/block/zram0/mem_limit
-
-           # Using mem suffixes
-           echo 256K > /sys/block/zram0/mem_limit
-           echo 512M > /sys/block/zram0/mem_limit
-           echo 1G > /sys/block/zram0/mem_limit
-
-           # To disable memory limit
-           echo 0 > /sys/block/zram0/mem_limit
+Set memory limit by writing the value to sysfs node 'mem_limit'.
+The value can be either in bytes or you can use mem suffixes.
+In addition, you could change the value in runtime.
+Examples:
+       # limit /dev/zram0 with 50MB memory
+       echo $((50*1024*1024)) > /sys/block/zram0/mem_limit
+
+       # Using mem suffixes
+       echo 256K > /sys/block/zram0/mem_limit
+       echo 512M > /sys/block/zram0/mem_limit
+       echo 1G > /sys/block/zram0/mem_limit
+
+       # To disable memory limit
+       echo 0 > /sys/block/zram0/mem_limit
 
 6) Activate:
        mkswap /dev/zram0