dt-bindings: interrupt-controller: Update csky mpintc

Add trigger type setting for csky,mpintc. The driver also could
support #interrupt-cells <1> and it wouldn't invalidate existing
DTs. Here we only show the complete format.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>

diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
index ab921f1698fb3b5852e3b66a96dbaf9a6a8db44d..e13405355166ddbcc7c2612883134101a254c70f 100644 (file)
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -6,11 +6,16 @@ C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
 SMP soc, and it also could be used in non-SMP system.
 
 Interrupt number definition:
-
   0-15  : software irq, and we use 15 as our IPI_IRQ.
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
+Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+ IRQ_TYPE_LEVEL_HIGH (default)
+ IRQ_TYPE_LEVEL_LOW
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+
 =============================
 intc node bindings definition
 =============================
@@ -26,15 +31,22 @@ intc node bindings definition
        - #interrupt-cells
                Usage: required
                Value type: <u32>
-               Definition: must be <1>
+               Definition: <2>
        - interrupt-controller:
                Usage: required
 
-Examples:
+Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>")
 ---------
+#include <dt-bindings/interrupt-controller/irq.h>
 
        intc: interrupt-controller {
                compatible = "csky,mpintc";
-               #interrupt-cells = <1>;
+               #interrupt-cells = <2>;
                interrupt-controller;
        };
+
+       device: device-example {
+               ...
+               interrupts = <34 IRQ_TYPE_EDGE_RISING>;
+               interrupt-parent = <&intc>;
+       };