bnx2x: Fix port selection in case of E2

On E2 flavor, dual-port mode, the port argument used for some
functions is needed as the global port number rather than the port per
path.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index b6588c5411ea9d65a47f86a1f1f99e29485285d0..fc637ce7f57d2d3b6095b823c2d0dac148003fd4 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -5442,7 +5442,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
                                  struct link_vars *vars)
 {
        struct bnx2x *bp = params->bp;
-       u8 port = params->port, initialize = 1;
+       u8 port, initialize = 1;
        u16 val;
        u16 temp;
        u32 actual_phy_selection;
@@ -5451,6 +5451,10 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
        /* This is just for MDIO_CTL_REG_84823_MEDIA register. */
 
        msleep(1);
+       if (CHIP_IS_E2(bp))
+               port = BP_PATH(bp);
+       else
+               port = params->port;
        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
                       MISC_REGISTERS_GPIO_OUTPUT_HIGH,
                       port);
@@ -5627,7 +5631,11 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
                                   struct link_params *params)
 {
        struct bnx2x *bp = params->bp;
-       u8 port = params->port;
+       u8 port;
+       if (CHIP_IS_E2(bp))
+               port = BP_PATH(bp);
+       else
+               port = params->port;
        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW,
                            port);
@@ -7023,7 +7031,8 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
                        return -EINVAL;
                }
                /* disable attentions */
-               bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+               bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 +
+                              port_of_path*4,
                             (NIG_MASK_XGXS0_LINK_STATUS |
                              NIG_MASK_XGXS0_LINK10G |
                              NIG_MASK_SERDES0_LINK_STATUS |