MIPS: bmips: Improve BCM6368 device tree

Add brcm,bcm6358-leds node to bcm6368.dtsi
Add reboot support (syscon-reboot as defined in BCM6328)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/12117/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 45152bc22117f081d15a8b6dd2740305b35efbf6..9c8d3fe28b3114e51aaf128a640bde630d31a65b 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -32,6 +32,7 @@
        };
 
        aliases {
+               leds0 = &leds0;
                uart0 = &uart0;
        };
 
@@ -50,6 +51,19 @@
                compatible = "simple-bus";
                ranges;
 
+               periph_cntl: syscon@10000000 {
+                       compatible = "syscon";
+                       reg = <0x10000000 0x14>;
+                       little-endian;
+               };
+
+               reboot: syscon-reboot@10000008 {
+                       compatible = "syscon-reboot";
+                       regmap = <&periph_cntl>;
+                       offset = <0x8>;
+                       mask = <0x1>;
+               };
+
                periph_intc: periph_intc@10000020 {
                        compatible = "brcm,bcm3380-l2-intc";
                        reg = <0x10000024 0x4 0x1000002c 0x4>,
@@ -62,6 +76,14 @@
                        interrupts = <2>;
                };
 
+               leds0: led-controller@100000d0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-leds";
+                       reg = <0x100000d0 0x8>;
+                       status = "disabled";
+               };
+
                uart0: serial@10000100 {
                        compatible = "brcm,bcm6345-uart";
                        reg = <0x10000100 0x18>;