.mask_reg = MAX8925_CHG_IRQ1_MASK,
.offs = 1 << 2,
},
- [MAX8925_IRQ_VCHG_USB_OVP] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 3,
- },
- [MAX8925_IRQ_VCHG_USB_F] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 4,
- },
- [MAX8925_IRQ_VCHG_USB_R] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 5,
- },
[MAX8925_IRQ_VCHG_THM_OK_R] = {
.reg = MAX8925_CHG_IRQ2,
.mask_reg = MAX8925_CHG_IRQ2_MASK,
__set_charger(info, 0);
dev_dbg(chip->dev, "Adapter removed\n");
break;
- case MAX8925_IRQ_VCHG_USB_R:
- info->usb_online = 1;
- __set_charger(info, 1);
- dev_dbg(chip->dev, "USB inserted\n");
- break;
- case MAX8925_IRQ_VCHG_USB_F:
- info->usb_online = 0;
- __set_charger(info, 0);
- dev_dbg(chip->dev, "USB removed\n");
- break;
case MAX8925_IRQ_VCHG_THM_OK_F:
/* Battery is not ready yet */
dev_dbg(chip->dev, "Battery temperature is out of range\n");
REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
}
- REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
- REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
- REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
if (!info->no_temp_support) {
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
MAX8925_IRQ_VCHG_DC_OVP,
MAX8925_IRQ_VCHG_DC_F,
MAX8925_IRQ_VCHG_DC_R,
- MAX8925_IRQ_VCHG_USB_OVP,
- MAX8925_IRQ_VCHG_USB_F,
- MAX8925_IRQ_VCHG_USB_R,
MAX8925_IRQ_VCHG_THM_OK_R,
MAX8925_IRQ_VCHG_THM_OK_F,
MAX8925_IRQ_VCHG_SYSLOW_F,