ARM: dts: qcom: add CM-QS600 board

CM-QS600 is a APQ8064 based computer on module.
The details are available at
http://compulab.co.il/products/computer-on-modules/cm-qs600/

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1e7b833bf489543466bfb2f99041f937984aebbc..91aa4766e3ce8aa83f05856aea9f5e64f523fe84 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
        orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
+       qcom-apq8064-cm-qs600.dtb \
        qcom-apq8064-ifc6410.dtb \
        qcom-apq8074-dragonboard.dtb \
        qcom-apq8084-ifc6540.dtb \

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
new file mode 100644 (file)
index 0000000..5d75666
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+       model = "CompuLab CM-QS600";
+       compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+       soc {
+               pinctrl@800000 {
+                       i2c1_pins: i2c1 {
+                               mux {
+                                       pins = "gpio20", "gpio21";
+                                       function = "gsbi1";
+                               };
+                       };
+               };
+
+               gsbi@12440000 {
+                       status = "okay";
+                       qcom,mode = <GSBI_PROT_I2C>;
+
+                       i2c@12460000 {
+                               status = "okay";
+                               clock-frequency = <200000>;
+                               pinctrl-0 = <&i2c1_pins>;
+                               pinctrl-names = "default";
+
+                               eeprom: eeprom@50 {
+                                       compatible = "24c02";
+                                       reg = <0x50>;
+                                       pagesize = <32>;
+                               };
+                       };
+               };
+
+               gsbi@16600000 {
+                       status = "ok";
+                       qcom,mode = <GSBI_PROT_I2C_UART>;
+                       serial@16640000 {
+                               status = "ok";
+                       };
+               };
+
+               amba {
+                       /* eMMC */
+                       sdcc1: sdcc@12400000 {
+                               status = "okay";
+                       };
+
+                       /* External micro SD card */
+                       sdcc3: sdcc@12180000 {
+                               status = "okay";
+                       };
+                       /* WLAN */
+                       sdcc4: sdcc@121c0000 {
+                               status = "okay";
+                       };
+               };
+       };
+};