igb: fix vlan filtering in promisc mode when not in VT mode

This patch fixes a VT mode check to make sure VLAN filters are disabled when
in promisc mode and VT is not enabled.

The problem with the previous check was that:
E1000_MRQC_ENABLE_VMDQ is defined as 0x00000003

but when not in VT mode:
mrqc |= E1000_MRQC_ENABLE_RSS_4Q (0x00000002)

So the above check will trigger regardless if VT mode is being used or not.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 6a0c1b66ce54116b88a8aaf33bcf0518a7ef7ca3..c1d72c03cb5932f83e9f8a397a55227fee981d9f 100644 (file)
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3739,9 +3739,8 @@ static void igb_set_rx_mode(struct net_device *netdev)
        rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
 
        if (netdev->flags & IFF_PROMISC) {
-               u32 mrqc = rd32(E1000_MRQC);
                /* retain VLAN HW filtering if in VT mode */
-               if (mrqc & E1000_MRQC_ENABLE_VMDQ)
+               if (adapter->vfs_allocated_count)
                        rctl |= E1000_RCTL_VFE;
                rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
                vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);