static struct hlist_head batadv_algo_list;
/**
- * batadv_algo_init - Initialize batman-adv algorithm management data structures
+ * batadv_algo_init() - Initialize batman-adv algorithm management data
+ * structures
*/
void batadv_algo_init(void)
{
0644);
/**
- * batadv_algo_dump_entry - fill in information about one supported routing
+ * batadv_algo_dump_entry() - fill in information about one supported routing
* algorithm
* @msg: netlink message to be sent back
* @portid: Port to reply to
}
/**
- * batadv_algo_dump - fill in information about supported routing
+ * batadv_algo_dump() - fill in information about supported routing
* algorithms
* @msg: netlink message to be sent back
* @cb: Parameters to the netlink request
};
/**
- * batadv_ring_buffer_set - update the ring buffer with the given value
+ * batadv_ring_buffer_set() - update the ring buffer with the given value
* @lq_recv: pointer to the ring buffer
* @lq_index: index to store the value at
* @value: value to store in the ring buffer
}
/**
- * batadv_ring_buffer_avg - compute the average of all non-zero values stored
+ * batadv_ring_buffer_avg() - compute the average of all non-zero values stored
* in the given ring buffer
* @lq_recv: pointer to the ring buffer
*
}
/**
- * batadv_iv_ogm_orig_free - free the private resources allocated for this
+ * batadv_iv_ogm_orig_free() - free the private resources allocated for this
* orig_node
* @orig_node: the orig_node for which the resources have to be free'd
*/
}
/**
- * batadv_iv_ogm_orig_add_if - change the private structures of the orig_node to
- * include the new hard-interface
+ * batadv_iv_ogm_orig_add_if() - change the private structures of the orig_node
+ * to include the new hard-interface
* @orig_node: the orig_node that has to be changed
* @max_if_num: the current amount of interfaces
*
}
/**
- * batadv_iv_ogm_drop_bcast_own_entry - drop section of bcast_own
+ * batadv_iv_ogm_drop_bcast_own_entry() - drop section of bcast_own
* @orig_node: the orig_node that has to be changed
* @max_if_num: the current amount of interfaces
* @del_if_num: the index of the interface being removed
}
/**
- * batadv_iv_ogm_drop_bcast_own_sum_entry - drop section of bcast_own_sum
+ * batadv_iv_ogm_drop_bcast_own_sum_entry() - drop section of bcast_own_sum
* @orig_node: the orig_node that has to be changed
* @max_if_num: the current amount of interfaces
* @del_if_num: the index of the interface being removed
}
/**
- * batadv_iv_ogm_orig_del_if - change the private structures of the orig_node to
- * exclude the removed interface
+ * batadv_iv_ogm_orig_del_if() - change the private structures of the orig_node
+ * to exclude the removed interface
* @orig_node: the orig_node that has to be changed
* @max_if_num: the current amount of interfaces
* @del_if_num: the index of the interface being removed
}
/**
- * batadv_iv_ogm_orig_get - retrieve or create (if does not exist) an originator
+ * batadv_iv_ogm_orig_get() - retrieve or create (if does not exist) an
+ * originator
* @bat_priv: the bat priv with all the soft interface information
* @addr: mac address of the originator
*
}
/**
- * batadv_iv_ogm_aggr_packet - checks if there is another OGM attached
+ * batadv_iv_ogm_aggr_packet() - checks if there is another OGM attached
* @buff_pos: current position in the skb
* @packet_len: total length of the skb
* @tvlv_len: tvlv length of the previously considered OGM
}
/**
- * batadv_iv_ogm_can_aggregate - find out if an OGM can be aggregated on an
+ * batadv_iv_ogm_can_aggregate() - find out if an OGM can be aggregated on an
* existing forward packet
* @new_bat_ogm_packet: OGM packet to be aggregated
* @bat_priv: the bat priv with all the soft interface information
}
/**
- * batadv_iv_ogm_aggregate_new - create a new aggregated packet and add this
+ * batadv_iv_ogm_aggregate_new() - create a new aggregated packet and add this
* packet to it.
* @packet_buff: pointer to the OGM
* @packet_len: (total) length of the OGM
}
/**
- * batadv_iv_ogm_queue_add - queue up an OGM for transmission
+ * batadv_iv_ogm_queue_add() - queue up an OGM for transmission
* @bat_priv: the bat priv with all the soft interface information
* @packet_buff: pointer to the OGM
* @packet_len: (total) length of the OGM
}
/**
- * batadv_iv_ogm_slide_own_bcast_window - bitshift own OGM broadcast windows for
- * the given interface
+ * batadv_iv_ogm_slide_own_bcast_window() - bitshift own OGM broadcast windows
+ * for the given interface
* @hard_iface: the interface for which the windows have to be shifted
*/
static void
}
/**
- * batadv_iv_ogm_orig_update - use OGM to update corresponding data in an
+ * batadv_iv_ogm_orig_update() - use OGM to update corresponding data in an
* originator
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: the orig node who originally emitted the ogm packet
}
/**
- * batadv_iv_ogm_calc_tq - calculate tq for current received ogm packet
+ * batadv_iv_ogm_calc_tq() - calculate tq for current received ogm packet
* @orig_node: the orig node who originally emitted the ogm packet
* @orig_neigh_node: the orig node struct of the neighbor who sent the packet
* @batadv_ogm_packet: the ogm packet
}
/**
- * batadv_iv_ogm_update_seqnos - process a batman packet for all interfaces,
+ * batadv_iv_ogm_update_seqnos() - process a batman packet for all interfaces,
* adjust the sequence number and find out whether it is a duplicate
* @ethhdr: ethernet header of the packet
* @batadv_ogm_packet: OGM packet to be considered
}
/**
- * batadv_iv_ogm_process_per_outif - process a batman iv OGM for an outgoing if
+ * batadv_iv_ogm_process_per_outif() - process a batman iv OGM for an outgoing
+ * interface
* @skb: the skb containing the OGM
* @ogm_offset: offset from skb->data to start of ogm header
* @orig_node: the (cached) orig node for the originator of this OGM
}
/**
- * batadv_iv_ogm_process - process an incoming batman iv OGM
+ * batadv_iv_ogm_process() - process an incoming batman iv OGM
* @skb: the skb containing the OGM
* @ogm_offset: offset to the OGM which should be processed (for aggregates)
* @if_incoming: the interface where this packet was receved
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_iv_ogm_orig_print_neigh - print neighbors for the originator table
+ * batadv_iv_ogm_orig_print_neigh() - print neighbors for the originator table
* @orig_node: the orig_node for which the neighbors are printed
* @if_outgoing: outgoing interface for these entries
* @seq: debugfs table seq_file struct
}
/**
- * batadv_iv_ogm_orig_print - print the originator table
+ * batadv_iv_ogm_orig_print() - print the originator table
* @bat_priv: the bat priv with all the soft interface information
* @seq: debugfs table seq_file struct
* @if_outgoing: the outgoing interface for which this should be printed
#endif
/**
- * batadv_iv_ogm_neigh_get_tq_avg - Get the TQ average for a neighbour on a
+ * batadv_iv_ogm_neigh_get_tq_avg() - Get the TQ average for a neighbour on a
* given outgoing interface.
* @neigh_node: Neighbour of interest
* @if_outgoing: Outgoing interface of interest
}
/**
- * batadv_iv_ogm_orig_dump_subentry - Dump an originator subentry into a
+ * batadv_iv_ogm_orig_dump_subentry() - Dump an originator subentry into a
* message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
}
/**
- * batadv_iv_ogm_orig_dump_entry - Dump an originator entry into a message
+ * batadv_iv_ogm_orig_dump_entry() - Dump an originator entry into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_iv_ogm_orig_dump_bucket - Dump an originator bucket into a
+ * batadv_iv_ogm_orig_dump_bucket() - Dump an originator bucket into a
* message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
}
/**
- * batadv_iv_ogm_orig_dump - Dump the originators into a message
+ * batadv_iv_ogm_orig_dump() - Dump the originators into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_iv_hardif_neigh_print - print a single hop neighbour node
+ * batadv_iv_hardif_neigh_print() - print a single hop neighbour node
* @seq: neighbour table seq_file struct
* @hardif_neigh: hardif neighbour information
*/
}
/**
- * batadv_iv_ogm_neigh_print - print the single hop neighbour list
+ * batadv_iv_ogm_neigh_print() - print the single hop neighbour list
* @bat_priv: the bat priv with all the soft interface information
* @seq: neighbour table seq_file struct
*/
#endif
/**
- * batadv_iv_ogm_neigh_diff - calculate tq difference of two neighbors
+ * batadv_iv_ogm_neigh_diff() - calculate tq difference of two neighbors
* @neigh1: the first neighbor object of the comparison
* @if_outgoing1: outgoing interface for the first neighbor
* @neigh2: the second neighbor object of the comparison
}
/**
- * batadv_iv_ogm_neigh_dump_neigh - Dump a neighbour into a netlink message
+ * batadv_iv_ogm_neigh_dump_neigh() - Dump a neighbour into a netlink message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_iv_ogm_neigh_dump_hardif - Dump the neighbours of a hard interface
+ * batadv_iv_ogm_neigh_dump_hardif() - Dump the neighbours of a hard interface
* into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
}
/**
- * batadv_iv_ogm_neigh_dump - Dump the neighbours into a message
+ * batadv_iv_ogm_neigh_dump() - Dump the neighbours into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
}
/**
- * batadv_iv_ogm_neigh_cmp - compare the metrics of two neighbors
+ * batadv_iv_ogm_neigh_cmp() - compare the metrics of two neighbors
* @neigh1: the first neighbor object of the comparison
* @if_outgoing1: outgoing interface for the first neighbor
* @neigh2: the second neighbor object of the comparison
}
/**
- * batadv_iv_ogm_neigh_is_sob - check if neigh1 is similarly good or better
+ * batadv_iv_ogm_neigh_is_sob() - check if neigh1 is similarly good or better
* than neigh2 from the metric prospective
* @neigh1: the first neighbor object of the comparison
* @if_outgoing1: outgoing interface for the first neighbor
}
/**
- * batadv_iv_init_sel_class - initialize GW selection class
+ * batadv_iv_init_sel_class() - initialize GW selection class
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_iv_init_sel_class(struct batadv_priv *bat_priv)
#endif
/**
- * batadv_iv_gw_dump_entry - Dump a gateway into a message
+ * batadv_iv_gw_dump_entry() - Dump a gateway into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_iv_gw_dump - Dump gateways into a message
+ * batadv_iv_gw_dump() - Dump gateways into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
}
/**
- * batadv_v_iface_update_mac - react to hard-interface MAC address change
+ * batadv_v_iface_update_mac() - react to hard-interface MAC address change
* @hard_iface: the modified interface
*
* If the modified interface is the primary one, update the originator
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_v_orig_print_neigh - print neighbors for the originator table
+ * batadv_v_orig_print_neigh() - print neighbors for the originator table
* @orig_node: the orig_node for which the neighbors are printed
* @if_outgoing: outgoing interface for these entries
* @seq: debugfs table seq_file struct
}
/**
- * batadv_v_hardif_neigh_print - print a single ELP neighbour node
+ * batadv_v_hardif_neigh_print() - print a single ELP neighbour node
* @seq: neighbour table seq_file struct
* @hardif_neigh: hardif neighbour information
*/
}
/**
- * batadv_v_neigh_print - print the single hop neighbour list
+ * batadv_v_neigh_print() - print the single hop neighbour list
* @bat_priv: the bat priv with all the soft interface information
* @seq: neighbour table seq_file struct
*/
#endif
/**
- * batadv_v_neigh_dump_neigh - Dump a neighbour into a message
+ * batadv_v_neigh_dump_neigh() - Dump a neighbour into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_v_neigh_dump_hardif - Dump the neighbours of a hard interface into
+ * batadv_v_neigh_dump_hardif() - Dump the neighbours of a hard interface into
* a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
}
/**
- * batadv_v_neigh_dump - Dump the neighbours of a hard interface into a
+ * batadv_v_neigh_dump() - Dump the neighbours of a hard interface into a
* message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_v_orig_print - print the originator table
+ * batadv_v_orig_print() - print the originator table
* @bat_priv: the bat priv with all the soft interface information
* @seq: debugfs table seq_file struct
* @if_outgoing: the outgoing interface for which this should be printed
#endif
/**
- * batadv_v_orig_dump_subentry - Dump an originator subentry into a
- * message
+ * batadv_v_orig_dump_subentry() - Dump an originator subentry into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_v_orig_dump_entry - Dump an originator entry into a message
+ * batadv_v_orig_dump_entry() - Dump an originator entry into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_v_orig_dump_bucket - Dump an originator bucket into a
- * message
+ * batadv_v_orig_dump_bucket() - Dump an originator bucket into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_v_orig_dump - Dump the originators into a message
+ * batadv_v_orig_dump() - Dump the originators into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
}
/**
- * batadv_v_init_sel_class - initialize GW selection class
+ * batadv_v_init_sel_class() - initialize GW selection class
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_v_init_sel_class(struct batadv_priv *bat_priv)
}
/**
- * batadv_v_gw_throughput_get - retrieve the GW-bandwidth for a given GW
+ * batadv_v_gw_throughput_get() - retrieve the GW-bandwidth for a given GW
* @gw_node: the GW to retrieve the metric for
* @bw: the pointer where the metric will be stored. The metric is computed as
* the minimum between the GW advertised throughput and the path throughput to
}
/**
- * batadv_v_gw_get_best_gw_node - retrieve the best GW node
+ * batadv_v_gw_get_best_gw_node() - retrieve the best GW node
* @bat_priv: the bat priv with all the soft interface information
*
* Return: the GW node having the best GW-metric, NULL if no GW is known
}
/**
- * batadv_v_gw_is_eligible - check if a originator would be selected as GW
+ * batadv_v_gw_is_eligible() - check if a originator would be selected as GW
* @bat_priv: the bat priv with all the soft interface information
* @curr_gw_orig: originator representing the currently selected GW
* @orig_node: the originator representing the new candidate
}
/**
- * batadv_v_gw_print - print the gateway list
+ * batadv_v_gw_print() - print the gateway list
* @bat_priv: the bat priv with all the soft interface information
* @seq: gateway table seq_file struct
*/
#endif
/**
- * batadv_v_gw_dump_entry - Dump a gateway into a message
+ * batadv_v_gw_dump_entry() - Dump a gateway into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_v_gw_dump - Dump gateways into a message
+ * batadv_v_gw_dump() - Dump gateways into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
};
/**
- * batadv_v_hardif_init - initialize the algorithm specific fields in the
+ * batadv_v_hardif_init() - initialize the algorithm specific fields in the
* hard-interface object
* @hard_iface: the hard-interface to initialize
*/
}
/**
- * batadv_v_mesh_init - initialize the B.A.T.M.A.N. V private resources for a
+ * batadv_v_mesh_init() - initialize the B.A.T.M.A.N. V private resources for a
* mesh
* @bat_priv: the object representing the mesh interface to initialise
*
}
/**
- * batadv_v_mesh_free - free the B.A.T.M.A.N. V private resources for a mesh
+ * batadv_v_mesh_free() - free the B.A.T.M.A.N. V private resources for a mesh
* @bat_priv: the object representing the mesh interface to free
*/
void batadv_v_mesh_free(struct batadv_priv *bat_priv)
}
/**
- * batadv_v_init - B.A.T.M.A.N. V initialization function
+ * batadv_v_init() - B.A.T.M.A.N. V initialization function
*
* Description: Takes care of initializing all the subcomponents.
* It is invoked upon module load only.
#include "send.h"
/**
- * batadv_v_elp_start_timer - restart timer for ELP periodic work
+ * batadv_v_elp_start_timer() - restart timer for ELP periodic work
* @hard_iface: the interface for which the timer has to be reset
*/
static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
}
/**
- * batadv_v_elp_get_throughput - get the throughput towards a neighbour
+ * batadv_v_elp_get_throughput() - get the throughput towards a neighbour
* @neigh: the neighbour for which the throughput has to be obtained
*
* Return: The throughput towards the given neighbour in multiples of 100kpbs
}
/**
- * batadv_v_elp_throughput_metric_update - worker updating the throughput metric
- * of a single hop neighbour
+ * batadv_v_elp_throughput_metric_update() - worker updating the throughput
+ * metric of a single hop neighbour
* @work: the work queue item
*/
void batadv_v_elp_throughput_metric_update(struct work_struct *work)
}
/**
- * batadv_v_elp_wifi_neigh_probe - send link probing packets to a neighbour
+ * batadv_v_elp_wifi_neigh_probe() - send link probing packets to a neighbour
* @neigh: the neighbour to probe
*
* Sends a predefined number of unicast wifi packets to a given neighbour in
}
/**
- * batadv_v_elp_periodic_work - ELP periodic task per interface
+ * batadv_v_elp_periodic_work() - ELP periodic task per interface
* @work: work queue item
*
* Emits broadcast ELP message in regular intervals.
}
/**
- * batadv_v_elp_iface_enable - setup the ELP interface private resources
+ * batadv_v_elp_iface_enable() - setup the ELP interface private resources
* @hard_iface: interface for which the data has to be prepared
*
* Return: 0 on success or a -ENOMEM in case of failure.
}
/**
- * batadv_v_elp_iface_disable - release ELP interface private resources
+ * batadv_v_elp_iface_disable() - release ELP interface private resources
* @hard_iface: interface for which the resources have to be released
*/
void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface)
}
/**
- * batadv_v_elp_iface_activate - update the ELP buffer belonging to the given
+ * batadv_v_elp_iface_activate() - update the ELP buffer belonging to the given
* hard-interface
* @primary_iface: the new primary interface
* @hard_iface: interface holding the to-be-updated buffer
}
/**
- * batadv_v_elp_primary_iface_set - change internal data to reflect the new
+ * batadv_v_elp_primary_iface_set() - change internal data to reflect the new
* primary interface
* @primary_iface: the new primary interface
*/
}
/**
- * batadv_v_elp_neigh_update - update an ELP neighbour node
+ * batadv_v_elp_neigh_update() - update an ELP neighbour node
* @bat_priv: the bat priv with all the soft interface information
* @neigh_addr: the neighbour interface address
* @if_incoming: the interface the packet was received through
}
/**
- * batadv_v_elp_packet_recv - main ELP packet handler
+ * batadv_v_elp_packet_recv() - main ELP packet handler
* @skb: the received packet
* @if_incoming: the interface this packet was received through
*
#include "tvlv.h"
/**
- * batadv_v_ogm_orig_get - retrieve and possibly create an originator node
+ * batadv_v_ogm_orig_get() - retrieve and possibly create an originator node
* @bat_priv: the bat priv with all the soft interface information
* @addr: the address of the originator
*
}
/**
- * batadv_v_ogm_start_timer - restart the OGM sending timer
+ * batadv_v_ogm_start_timer() - restart the OGM sending timer
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_v_ogm_start_timer(struct batadv_priv *bat_priv)
}
/**
- * batadv_v_ogm_send_to_if - send a batman ogm using a given interface
+ * batadv_v_ogm_send_to_if() - send a batman ogm using a given interface
* @skb: the OGM to send
* @hard_iface: the interface to use to send the OGM
*/
}
/**
- * batadv_v_ogm_send - periodic worker broadcasting the own OGM
+ * batadv_v_ogm_send() - periodic worker broadcasting the own OGM
* @work: work queue item
*/
static void batadv_v_ogm_send(struct work_struct *work)
}
/**
- * batadv_v_ogm_iface_enable - prepare an interface for B.A.T.M.A.N. V
+ * batadv_v_ogm_iface_enable() - prepare an interface for B.A.T.M.A.N. V
* @hard_iface: the interface to prepare
*
* Takes care of scheduling own OGM sending routine for this interface.
}
/**
- * batadv_v_ogm_primary_iface_set - set a new primary interface
+ * batadv_v_ogm_primary_iface_set() - set a new primary interface
* @primary_iface: the new primary interface
*/
void batadv_v_ogm_primary_iface_set(struct batadv_hard_iface *primary_iface)
}
/**
- * batadv_v_forward_penalty - apply a penalty to the throughput metric forwarded
- * with B.A.T.M.A.N. V OGMs
+ * batadv_v_forward_penalty() - apply a penalty to the throughput metric
+ * forwarded with B.A.T.M.A.N. V OGMs
* @bat_priv: the bat priv with all the soft interface information
* @if_incoming: the interface where the OGM has been received
* @if_outgoing: the interface where the OGM has to be forwarded to
}
/**
- * batadv_v_ogm_forward - check conditions and forward an OGM to the given
+ * batadv_v_ogm_forward() - check conditions and forward an OGM to the given
* outgoing interface
* @bat_priv: the bat priv with all the soft interface information
* @ogm_received: previously received OGM to be forwarded
}
/**
- * batadv_v_ogm_metric_update - update route metric based on OGM
+ * batadv_v_ogm_metric_update() - update route metric based on OGM
* @bat_priv: the bat priv with all the soft interface information
* @ogm2: OGM2 structure
* @orig_node: Originator structure for which the OGM has been received
}
/**
- * batadv_v_ogm_route_update - update routes based on OGM
+ * batadv_v_ogm_route_update() - update routes based on OGM
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: the Ethernet header of the OGM2
* @ogm2: OGM2 structure
}
/**
- * batadv_v_ogm_process_per_outif - process a batman v OGM for an outgoing if
+ * batadv_v_ogm_process_per_outif() - process a batman v OGM for an outgoing if
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: the Ethernet header of the OGM2
* @ogm2: OGM2 structure
}
/**
- * batadv_v_ogm_aggr_packet - checks if there is another OGM aggregated
+ * batadv_v_ogm_aggr_packet() - checks if there is another OGM aggregated
* @buff_pos: current position in the skb
* @packet_len: total length of the skb
* @tvlv_len: tvlv length of the previously considered OGM
}
/**
- * batadv_v_ogm_process - process an incoming batman v OGM
+ * batadv_v_ogm_process() - process an incoming batman v OGM
* @skb: the skb containing the OGM
* @ogm_offset: offset to the OGM which should be processed (for aggregates)
* @if_incoming: the interface where this packet was receved
}
/**
- * batadv_v_ogm_packet_recv - OGM2 receiving handler
+ * batadv_v_ogm_packet_recv() - OGM2 receiving handler
* @skb: the received OGM
* @if_incoming: the interface where this OGM has been received
*
}
/**
- * batadv_v_ogm_init - initialise the OGM2 engine
+ * batadv_v_ogm_init() - initialise the OGM2 engine
* @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 on success or a negative error code in case of failure
}
/**
- * batadv_v_ogm_free - free OGM private resources
+ * batadv_v_ogm_free() - free OGM private resources
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_v_ogm_free(struct batadv_priv *bat_priv)
}
/**
- * batadv_bit_get_packet - receive and process one packet within the sequence
+ * batadv_bit_get_packet() - receive and process one packet within the sequence
* number window
* @priv: the bat priv with all the soft interface information
* @seq_bits: pointer to the sequence number receive packet
#include <linux/types.h>
/**
- * batadv_test_bit - check if bit is set in the current window
+ * batadv_test_bit() - check if bit is set in the current window
*
* @seq_bits: pointer to the sequence number receive packet
* @last_seqno: latest sequence number in seq_bits
struct batadv_bla_backbone_gw *backbone_gw);
/**
- * batadv_choose_claim - choose the right bucket for a claim.
+ * batadv_choose_claim() - choose the right bucket for a claim.
* @data: data to hash
* @size: size of the hash table
*
}
/**
- * batadv_choose_backbone_gw - choose the right bucket for a backbone gateway.
+ * batadv_choose_backbone_gw() - choose the right bucket for a backbone gateway.
* @data: data to hash
* @size: size of the hash table
*
}
/**
- * batadv_compare_backbone_gw - compare address and vid of two backbone gws
+ * batadv_compare_backbone_gw() - compare address and vid of two backbone gws
* @node: list node of the first entry to compare
* @data2: pointer to the second backbone gateway
*
}
/**
- * batadv_compare_claim - compare address and vid of two claims
+ * batadv_compare_claim() - compare address and vid of two claims
* @node: list node of the first entry to compare
* @data2: pointer to the second claims
*
}
/**
- * batadv_backbone_gw_release - release backbone gw from lists and queue for
+ * batadv_backbone_gw_release() - release backbone gw from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the backbone gw
*/
}
/**
- * batadv_backbone_gw_put - decrement the backbone gw refcounter and possibly
+ * batadv_backbone_gw_put() - decrement the backbone gw refcounter and possibly
* release it
* @backbone_gw: backbone gateway to be free'd
*/
}
/**
- * batadv_claim_release - release claim from lists and queue for free after rcu
- * grace period
+ * batadv_claim_release() - release claim from lists and queue for free after
+ * rcu grace period
* @ref: kref pointer of the claim
*/
static void batadv_claim_release(struct kref *ref)
}
/**
- * batadv_claim_put - decrement the claim refcounter and possibly
- * release it
+ * batadv_claim_put() - decrement the claim refcounter and possibly release it
* @claim: claim to be free'd
*/
static void batadv_claim_put(struct batadv_bla_claim *claim)
}
/**
- * batadv_claim_hash_find - looks for a claim in the claim hash
+ * batadv_claim_hash_find() - looks for a claim in the claim hash
* @bat_priv: the bat priv with all the soft interface information
* @data: search data (may be local/static data)
*
}
/**
- * batadv_backbone_hash_find - looks for a backbone gateway in the hash
+ * batadv_backbone_hash_find() - looks for a backbone gateway in the hash
* @bat_priv: the bat priv with all the soft interface information
* @addr: the address of the originator
* @vid: the VLAN ID
}
/**
- * batadv_bla_del_backbone_claims - delete all claims for a backbone
+ * batadv_bla_del_backbone_claims() - delete all claims for a backbone
* @backbone_gw: backbone gateway where the claims should be removed
*/
static void
}
/**
- * batadv_bla_send_claim - sends a claim frame according to the provided info
+ * batadv_bla_send_claim() - sends a claim frame according to the provided info
* @bat_priv: the bat priv with all the soft interface information
* @mac: the mac address to be announced within the claim
* @vid: the VLAN ID
}
/**
- * batadv_bla_loopdetect_report - worker for reporting the loop
+ * batadv_bla_loopdetect_report() - worker for reporting the loop
* @work: work queue item
*
* Throws an uevent, as the loopdetect check function can't do that itself
}
/**
- * batadv_bla_get_backbone_gw - finds or creates a backbone gateway
+ * batadv_bla_get_backbone_gw() - finds or creates a backbone gateway
* @bat_priv: the bat priv with all the soft interface information
* @orig: the mac address of the originator
* @vid: the VLAN ID
}
/**
- * batadv_bla_update_own_backbone_gw - updates the own backbone gw for a VLAN
+ * batadv_bla_update_own_backbone_gw() - updates the own backbone gw for a VLAN
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the selected primary interface
* @vid: VLAN identifier
}
/**
- * batadv_bla_answer_request - answer a bla request by sending own claims
+ * batadv_bla_answer_request() - answer a bla request by sending own claims
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: interface where the request came on
* @vid: the vid where the request came on
}
/**
- * batadv_bla_send_request - send a request to repeat claims
+ * batadv_bla_send_request() - send a request to repeat claims
* @backbone_gw: the backbone gateway from whom we are out of sync
*
* When the crc is wrong, ask the backbone gateway for a full table update.
}
/**
- * batadv_bla_send_announce - Send an announcement frame
+ * batadv_bla_send_announce() - Send an announcement frame
* @bat_priv: the bat priv with all the soft interface information
* @backbone_gw: our backbone gateway which should be announced
*/
}
/**
- * batadv_bla_add_claim - Adds a claim in the claim hash
+ * batadv_bla_add_claim() - Adds a claim in the claim hash
* @bat_priv: the bat priv with all the soft interface information
* @mac: the mac address of the claim
* @vid: the VLAN ID of the frame
}
/**
- * batadv_bla_claim_get_backbone_gw - Get valid reference for backbone_gw of
+ * batadv_bla_claim_get_backbone_gw() - Get valid reference for backbone_gw of
* claim
* @claim: claim whose backbone_gw should be returned
*
}
/**
- * batadv_bla_del_claim - delete a claim from the claim hash
+ * batadv_bla_del_claim() - delete a claim from the claim hash
* @bat_priv: the bat priv with all the soft interface information
* @mac: mac address of the claim to be removed
* @vid: VLAN id for the claim to be removed
}
/**
- * batadv_handle_announce - check for ANNOUNCE frame
+ * batadv_handle_announce() - check for ANNOUNCE frame
* @bat_priv: the bat priv with all the soft interface information
* @an_addr: announcement mac address (ARP Sender HW address)
* @backbone_addr: originator address of the sender (Ethernet source MAC)
}
/**
- * batadv_handle_request - check for REQUEST frame
+ * batadv_handle_request() - check for REQUEST frame
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the primary hard interface of this batman soft interface
* @backbone_addr: backbone address to be requested (ARP sender HW MAC)
}
/**
- * batadv_handle_unclaim - check for UNCLAIM frame
+ * batadv_handle_unclaim() - check for UNCLAIM frame
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the primary hard interface of this batman soft interface
* @backbone_addr: originator address of the backbone (Ethernet source)
}
/**
- * batadv_handle_claim - check for CLAIM frame
+ * batadv_handle_claim() - check for CLAIM frame
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the primary hard interface of this batman soft interface
* @backbone_addr: originator address of the backbone (Ethernet Source)
}
/**
- * batadv_check_claim_group - check for claim group membership
+ * batadv_check_claim_group() - check for claim group membership
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the primary interface of this batman interface
* @hw_src: the Hardware source in the ARP Header
}
/**
- * batadv_bla_process_claim - Check if this is a claim frame, and process it
+ * batadv_bla_process_claim() - Check if this is a claim frame, and process it
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the primary hard interface of this batman soft interface
* @skb: the frame to be checked
}
/**
- * batadv_bla_purge_backbone_gw - Remove backbone gateways after a timeout or
+ * batadv_bla_purge_backbone_gw() - Remove backbone gateways after a timeout or
* immediately
* @bat_priv: the bat priv with all the soft interface information
* @now: whether the whole hash shall be wiped now
}
/**
- * batadv_bla_purge_claims - Remove claims after a timeout or immediately
+ * batadv_bla_purge_claims() - Remove claims after a timeout or immediately
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the selected primary interface, may be NULL if now is set
* @now: whether the whole hash shall be wiped now
}
/**
- * batadv_bla_update_orig_address - Update the backbone gateways when the own
+ * batadv_bla_update_orig_address() - Update the backbone gateways when the own
* originator address changes
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: the new selected primary_if
}
/**
- * batadv_bla_send_loopdetect - send a loopdetect frame
+ * batadv_bla_send_loopdetect() - send a loopdetect frame
* @bat_priv: the bat priv with all the soft interface information
* @backbone_gw: the backbone gateway for which a loop should be detected
*
}
/**
- * batadv_bla_status_update - purge bla interfaces if necessary
+ * batadv_bla_status_update() - purge bla interfaces if necessary
* @net_dev: the soft interface net device
*/
void batadv_bla_status_update(struct net_device *net_dev)
}
/**
- * batadv_bla_periodic_work - performs periodic bla work
+ * batadv_bla_periodic_work() - performs periodic bla work
* @work: kernel work struct
*
* periodic work to do:
static struct lock_class_key batadv_backbone_hash_lock_class_key;
/**
- * batadv_bla_init - initialize all bla structures
+ * batadv_bla_init() - initialize all bla structures
* @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 on success, < 0 on error.
}
/**
- * batadv_bla_check_bcast_duplist - Check if a frame is in the broadcast dup.
+ * batadv_bla_check_bcast_duplist() - Check if a frame is in the broadcast dup.
* @bat_priv: the bat priv with all the soft interface information
* @skb: contains the bcast_packet to be checked
*
}
/**
- * batadv_bla_is_backbone_gw_orig - Check if the originator is a gateway for
+ * batadv_bla_is_backbone_gw_orig() - Check if the originator is a gateway for
* the VLAN identified by vid.
* @bat_priv: the bat priv with all the soft interface information
* @orig: originator mac address
}
/**
- * batadv_bla_is_backbone_gw - check if originator is a backbone gw for a VLAN.
+ * batadv_bla_is_backbone_gw() - check if originator is a backbone gw for a VLAN
* @skb: the frame to be checked
* @orig_node: the orig_node of the frame
* @hdr_size: maximum length of the frame
}
/**
- * batadv_bla_free - free all bla structures
+ * batadv_bla_free() - free all bla structures
* @bat_priv: the bat priv with all the soft interface information
*
* for softinterface free or module unload
}
/**
- * batadv_bla_loopdetect_check - check and handle a detected loop
+ * batadv_bla_loopdetect_check() - check and handle a detected loop
* @bat_priv: the bat priv with all the soft interface information
* @skb: the packet to check
* @primary_if: interface where the request came on
}
/**
- * batadv_bla_rx - check packets coming from the mesh.
+ * batadv_bla_rx() - check packets coming from the mesh.
* @bat_priv: the bat priv with all the soft interface information
* @skb: the frame to be checked
* @vid: the VLAN ID of the frame
}
/**
- * batadv_bla_tx - check packets going into the mesh
+ * batadv_bla_tx() - check packets going into the mesh
* @bat_priv: the bat priv with all the soft interface information
* @skb: the frame to be checked
* @vid: the VLAN ID of the frame
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_bla_claim_table_seq_print_text - print the claim table in a seq file
+ * batadv_bla_claim_table_seq_print_text() - print the claim table in a seq file
* @seq: seq file to print on
* @offset: not used
*
#endif
/**
- * batadv_bla_claim_dump_entry - dump one entry of the claim table
+ * batadv_bla_claim_dump_entry() - dump one entry of the claim table
* to a netlink socket
* @msg: buffer for the message
* @portid: netlink port
}
/**
- * batadv_bla_claim_dump_bucket - dump one bucket of the claim table
+ * batadv_bla_claim_dump_bucket() - dump one bucket of the claim table
* to a netlink socket
* @msg: buffer for the message
* @portid: netlink port
}
/**
- * batadv_bla_claim_dump - dump claim table to a netlink socket
+ * batadv_bla_claim_dump() - dump claim table to a netlink socket
* @msg: buffer for the message
* @cb: callback structure containing arguments
*
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_bla_backbone_table_seq_print_text - print the backbone table in a seq
- * file
+ * batadv_bla_backbone_table_seq_print_text() - print the backbone table in a
+ * seq file
* @seq: seq file to print on
* @offset: not used
*
#endif
/**
- * batadv_bla_backbone_dump_entry - dump one entry of the backbone table
- * to a netlink socket
+ * batadv_bla_backbone_dump_entry() - dump one entry of the backbone table to a
+ * netlink socket
* @msg: buffer for the message
* @portid: netlink port
* @seq: Sequence number of netlink message
}
/**
- * batadv_bla_backbone_dump_bucket - dump one bucket of the backbone table
- * to a netlink socket
+ * batadv_bla_backbone_dump_bucket() - dump one bucket of the backbone table to
+ * a netlink socket
* @msg: buffer for the message
* @portid: netlink port
* @seq: Sequence number of netlink message
}
/**
- * batadv_bla_backbone_dump - dump backbone table to a netlink socket
+ * batadv_bla_backbone_dump() - dump backbone table to a netlink socket
* @msg: buffer for the message
* @cb: callback structure containing arguments
*
#ifdef CONFIG_BATMAN_ADV_DAT
/**
- * batadv_bla_check_claim - check if address is claimed
+ * batadv_bla_check_claim() - check if address is claimed
*
* @bat_priv: the bat priv with all the soft interface information
* @addr: mac address of which the claim status is checked
struct sk_buff;
/**
- * batadv_bla_is_loopdetect_mac - check if the mac address is from a loop detect
- * frame sent by bridge loop avoidance
+ * batadv_bla_is_loopdetect_mac() - check if the mac address is from a loop
+ * detect frame sent by bridge loop avoidance
* @mac: mac address to check
*
* Return: true if the it looks like a loop detect frame
}
/**
- * batadv_originators_hardif_open - handles debugfs output for the
- * originator table of an hard interface
+ * batadv_originators_hardif_open() - handles debugfs output for the originator
+ * table of an hard interface
* @inode: inode pointer to debugfs file
* @file: pointer to the seq_file
*
#ifdef CONFIG_BATMAN_ADV_DAT
/**
- * batadv_dat_cache_open - Prepare file handler for reads from dat_chache
+ * batadv_dat_cache_open() - Prepare file handler for reads from dat_chache
* @inode: inode which was opened
* @file: file handle to be initialized
*
#ifdef CONFIG_BATMAN_ADV_MCAST
/**
- * batadv_mcast_flags_open - prepare file handler for reads from mcast_flags
+ * batadv_mcast_flags_open() - prepare file handler for reads from mcast_flags
* @inode: inode which was opened
* @file: file handle to be initialized
*
}
/**
- * batadv_debugfs_add_hardif - creates the base directory for a hard interface
+ * batadv_debugfs_add_hardif() - creates the base directory for a hard interface
* in debugfs.
* @hard_iface: hard interface which should be added.
*
}
/**
- * batadv_debugfs_del_hardif - delete the base directory for a hard interface
+ * batadv_debugfs_del_hardif() - delete the base directory for a hard interface
* in debugfs.
* @hard_iface: hard interface which is deleted.
*/
static void batadv_dat_purge(struct work_struct *work);
/**
- * batadv_dat_start_timer - initialise the DAT periodic worker
+ * batadv_dat_start_timer() - initialise the DAT periodic worker
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_dat_start_timer(struct batadv_priv *bat_priv)
}
/**
- * batadv_dat_entry_release - release dat_entry from lists and queue for free
+ * batadv_dat_entry_release() - release dat_entry from lists and queue for free
* after rcu grace period
* @ref: kref pointer of the dat_entry
*/
}
/**
- * batadv_dat_entry_put - decrement the dat_entry refcounter and possibly
+ * batadv_dat_entry_put() - decrement the dat_entry refcounter and possibly
* release it
* @dat_entry: dat_entry to be free'd
*/
}
/**
- * batadv_dat_to_purge - check whether a dat_entry has to be purged or not
+ * batadv_dat_to_purge() - check whether a dat_entry has to be purged or not
* @dat_entry: the entry to check
*
* Return: true if the entry has to be purged now, false otherwise.
}
/**
- * __batadv_dat_purge - delete entries from the DAT local storage
+ * __batadv_dat_purge() - delete entries from the DAT local storage
* @bat_priv: the bat priv with all the soft interface information
* @to_purge: function in charge to decide whether an entry has to be purged or
* not. This function takes the dat_entry as argument and has to
}
/**
- * batadv_dat_purge - periodic task that deletes old entries from the local DAT
- * hash table
+ * batadv_dat_purge() - periodic task that deletes old entries from the local
+ * DAT hash table
* @work: kernel work struct
*/
static void batadv_dat_purge(struct work_struct *work)
}
/**
- * batadv_compare_dat - comparing function used in the local DAT hash table
+ * batadv_compare_dat() - comparing function used in the local DAT hash table
* @node: node in the local table
* @data2: second object to compare the node to
*
}
/**
- * batadv_arp_hw_src - extract the hw_src field from an ARP packet
+ * batadv_arp_hw_src() - extract the hw_src field from an ARP packet
* @skb: ARP packet
* @hdr_size: size of the possible header before the ARP packet
*
}
/**
- * batadv_arp_ip_src - extract the ip_src field from an ARP packet
+ * batadv_arp_ip_src() - extract the ip_src field from an ARP packet
* @skb: ARP packet
* @hdr_size: size of the possible header before the ARP packet
*
}
/**
- * batadv_arp_hw_dst - extract the hw_dst field from an ARP packet
+ * batadv_arp_hw_dst() - extract the hw_dst field from an ARP packet
* @skb: ARP packet
* @hdr_size: size of the possible header before the ARP packet
*
}
/**
- * batadv_arp_ip_dst - extract the ip_dst field from an ARP packet
+ * batadv_arp_ip_dst() - extract the ip_dst field from an ARP packet
* @skb: ARP packet
* @hdr_size: size of the possible header before the ARP packet
*
}
/**
- * batadv_hash_dat - compute the hash value for an IP address
+ * batadv_hash_dat() - compute the hash value for an IP address
* @data: data to hash
* @size: size of the hash table
*
}
/**
- * batadv_dat_entry_hash_find - look for a given dat_entry in the local hash
+ * batadv_dat_entry_hash_find() - look for a given dat_entry in the local hash
* table
* @bat_priv: the bat priv with all the soft interface information
* @ip: search key
}
/**
- * batadv_dat_entry_add - add a new dat entry or update it if already exists
+ * batadv_dat_entry_add() - add a new dat entry or update it if already exists
* @bat_priv: the bat priv with all the soft interface information
* @ip: ipv4 to add/edit
* @mac_addr: mac address to assign to the given ipv4
#ifdef CONFIG_BATMAN_ADV_DEBUG
/**
- * batadv_dbg_arp - print a debug message containing all the ARP packet details
+ * batadv_dbg_arp() - print a debug message containing all the ARP packet
+ * details
* @bat_priv: the bat priv with all the soft interface information
* @skb: ARP packet
* @hdr_size: size of the possible header before the ARP packet
#endif /* CONFIG_BATMAN_ADV_DEBUG */
/**
- * batadv_is_orig_node_eligible - check whether a node can be a DHT candidate
+ * batadv_is_orig_node_eligible() - check whether a node can be a DHT candidate
* @res: the array with the already selected candidates
* @select: number of already selected candidates
* @tmp_max: address of the currently evaluated node
}
/**
- * batadv_choose_next_candidate - select the next DHT candidate
+ * batadv_choose_next_candidate() - select the next DHT candidate
* @bat_priv: the bat priv with all the soft interface information
* @cands: candidates array
* @select: number of candidates already present in the array
}
/**
- * batadv_dat_select_candidates - select the nodes which the DHT message has to
- * be sent to
+ * batadv_dat_select_candidates() - select the nodes which the DHT message has
+ * to be sent to
* @bat_priv: the bat priv with all the soft interface information
* @ip_dst: ipv4 to look up in the DHT
* @vid: VLAN identifier
}
/**
- * batadv_dat_send_data - send a payload to the selected candidates
+ * batadv_dat_send_data() - send a payload to the selected candidates
* @bat_priv: the bat priv with all the soft interface information
* @skb: payload to send
* @ip: the DHT key
}
/**
- * batadv_dat_tvlv_container_update - update the dat tvlv container after dat
+ * batadv_dat_tvlv_container_update() - update the dat tvlv container after dat
* setting change
* @bat_priv: the bat priv with all the soft interface information
*/
}
/**
- * batadv_dat_status_update - update the dat tvlv container after dat
+ * batadv_dat_status_update() - update the dat tvlv container after dat
* setting change
* @net_dev: the soft interface net device
*/
}
/**
- * batadv_dat_tvlv_ogm_handler_v1 - process incoming dat tvlv container
+ * batadv_dat_tvlv_ogm_handler_v1() - process incoming dat tvlv container
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node of the ogm
* @flags: flags indicating the tvlv state (see batadv_tvlv_handler_flags)
}
/**
- * batadv_dat_hash_free - free the local DAT hash table
+ * batadv_dat_hash_free() - free the local DAT hash table
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_dat_hash_free(struct batadv_priv *bat_priv)
}
/**
- * batadv_dat_init - initialise the DAT internals
+ * batadv_dat_init() - initialise the DAT internals
* @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 in case of success, a negative error code otherwise
}
/**
- * batadv_dat_free - free the DAT internals
+ * batadv_dat_free() - free the DAT internals
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_dat_free(struct batadv_priv *bat_priv)
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_dat_cache_seq_print_text - print the local DAT hash table
+ * batadv_dat_cache_seq_print_text() - print the local DAT hash table
* @seq: seq file to print on
* @offset: not used
*
#endif
/**
- * batadv_arp_get_type - parse an ARP packet and gets the type
+ * batadv_arp_get_type() - parse an ARP packet and gets the type
* @bat_priv: the bat priv with all the soft interface information
* @skb: packet to analyse
* @hdr_size: size of the possible header before the ARP packet in the skb
}
/**
- * batadv_dat_get_vid - extract the VLAN identifier from skb if any
+ * batadv_dat_get_vid() - extract the VLAN identifier from skb if any
* @skb: the buffer containing the packet to extract the VID from
* @hdr_size: the size of the batman-adv header encapsulating the packet
*
}
/**
- * batadv_dat_arp_create_reply - create an ARP Reply
+ * batadv_dat_arp_create_reply() - create an ARP Reply
* @bat_priv: the bat priv with all the soft interface information
* @ip_src: ARP sender IP
* @ip_dst: ARP target IP
}
/**
- * batadv_dat_snoop_outgoing_arp_request - snoop the ARP request and try to
+ * batadv_dat_snoop_outgoing_arp_request() - snoop the ARP request and try to
* answer using DAT
* @bat_priv: the bat priv with all the soft interface information
* @skb: packet to check
}
/**
- * batadv_dat_snoop_incoming_arp_request - snoop the ARP request and try to
+ * batadv_dat_snoop_incoming_arp_request() - snoop the ARP request and try to
* answer using the local DAT storage
* @bat_priv: the bat priv with all the soft interface information
* @skb: packet to check
}
/**
- * batadv_dat_snoop_outgoing_arp_reply - snoop the ARP reply and fill the DHT
+ * batadv_dat_snoop_outgoing_arp_reply() - snoop the ARP reply and fill the DHT
* @bat_priv: the bat priv with all the soft interface information
* @skb: packet to check
*/
}
/**
- * batadv_dat_snoop_incoming_arp_reply - snoop the ARP reply and fill the local
- * DAT storage only
+ * batadv_dat_snoop_incoming_arp_reply() - snoop the ARP reply and fill the
+ * local DAT storage only
* @bat_priv: the bat priv with all the soft interface information
* @skb: packet to check
* @hdr_size: size of the encapsulation header
}
/**
- * batadv_dat_drop_broadcast_packet - check if an ARP request has to be dropped
- * (because the node has already obtained the reply via DAT) or not
+ * batadv_dat_drop_broadcast_packet() - check if an ARP request has to be
+ * dropped (because the node has already obtained the reply via DAT) or not
* @bat_priv: the bat priv with all the soft interface information
* @forw_packet: the broadcast packet
*
struct batadv_forw_packet *forw_packet);
/**
- * batadv_dat_init_orig_node_addr - assign a DAT address to the orig_node
+ * batadv_dat_init_orig_node_addr() - assign a DAT address to the orig_node
* @orig_node: the node to assign the DAT address to
*/
static inline void
}
/**
- * batadv_dat_init_own_addr - assign a DAT address to the node itself
+ * batadv_dat_init_own_addr() - assign a DAT address to the node itself
* @bat_priv: the bat priv with all the soft interface information
* @primary_if: a pointer to the primary interface
*/
int batadv_dat_cache_seq_print_text(struct seq_file *seq, void *offset);
/**
- * batadv_dat_inc_counter - increment the correct DAT packet counter
+ * batadv_dat_inc_counter() - increment the correct DAT packet counter
* @bat_priv: the bat priv with all the soft interface information
* @subtype: the 4addr subtype of the packet to be counted
*
#include "soft-interface.h"
/**
- * batadv_frag_clear_chain - delete entries in the fragment buffer chain
+ * batadv_frag_clear_chain() - delete entries in the fragment buffer chain
* @head: head of chain with entries.
* @dropped: whether the chain is cleared because all fragments are dropped
*
}
/**
- * batadv_frag_purge_orig - free fragments associated to an orig
+ * batadv_frag_purge_orig() - free fragments associated to an orig
* @orig_node: originator to free fragments from
* @check_cb: optional function to tell if an entry should be purged
*/
}
/**
- * batadv_frag_size_limit - maximum possible size of packet to be fragmented
+ * batadv_frag_size_limit() - maximum possible size of packet to be fragmented
*
* Return: the maximum size of payload that can be fragmented.
*/
}
/**
- * batadv_frag_init_chain - check and prepare fragment chain for new fragment
+ * batadv_frag_init_chain() - check and prepare fragment chain for new fragment
* @chain: chain in fragments table to init
* @seqno: sequence number of the received fragment
*
}
/**
- * batadv_frag_insert_packet - insert a fragment into a fragment chain
+ * batadv_frag_insert_packet() - insert a fragment into a fragment chain
* @orig_node: originator that the fragment was received from
* @skb: skb to insert
* @chain_out: list head to attach complete chains of fragments to
}
/**
- * batadv_frag_merge_packets - merge a chain of fragments
+ * batadv_frag_merge_packets() - merge a chain of fragments
* @chain: head of chain with fragments
*
* Expand the first skb in the chain and copy the content of the remaining
}
/**
- * batadv_frag_skb_buffer - buffer fragment for later merge
+ * batadv_frag_skb_buffer() - buffer fragment for later merge
* @skb: skb to buffer
* @orig_node_src: originator that the skb is received from
*
}
/**
- * batadv_frag_skb_fwd - forward fragments that would exceed MTU when merged
+ * batadv_frag_skb_fwd() - forward fragments that would exceed MTU when merged
* @skb: skb to forward
* @recv_if: interface that the skb is received on
* @orig_node_src: originator that the skb is received from
}
/**
- * batadv_frag_create - create a fragment from skb
+ * batadv_frag_create() - create a fragment from skb
* @skb: skb to create fragment from
* @frag_head: header to use in new fragment
* @fragment_size: size of new fragment
}
/**
- * batadv_frag_send_packet - create up to 16 fragments from the passed skb
+ * batadv_frag_send_packet() - create up to 16 fragments from the passed skb
* @skb: skb to create fragments from
* @orig_node: final destination of the created fragments
* @neigh_node: next-hop of the created fragments
struct batadv_neigh_node *neigh_node);
/**
- * batadv_frag_check_entry - check if a list of fragments has timed out
+ * batadv_frag_check_entry() - check if a list of fragments has timed out
* @frags_entry: table entry to check
*
* Return: true if the frags entry has timed out, false otherwise.
#define BATADV_DHCP_CHADDR_OFFSET 28
/**
- * batadv_gw_node_release - release gw_node from lists and queue for free after
- * rcu grace period
+ * batadv_gw_node_release() - release gw_node from lists and queue for free
+ * after rcu grace period
* @ref: kref pointer of the gw_node
*/
static void batadv_gw_node_release(struct kref *ref)
}
/**
- * batadv_gw_node_put - decrement the gw_node refcounter and possibly release it
+ * batadv_gw_node_put() - decrement the gw_node refcounter and possibly release
+ * it
* @gw_node: gateway node to free
*/
void batadv_gw_node_put(struct batadv_gw_node *gw_node)
}
/**
- * batadv_gw_reselect - force a gateway reselection
+ * batadv_gw_reselect() - force a gateway reselection
* @bat_priv: the bat priv with all the soft interface information
*
* Set a flag to remind the GW component to perform a new gateway reselection.
}
/**
- * batadv_gw_check_client_stop - check if client mode has been switched off
+ * batadv_gw_check_client_stop() - check if client mode has been switched off
* @bat_priv: the bat priv with all the soft interface information
*
* This function assumes the caller has checked that the gw state *is actually
}
/**
- * batadv_gw_node_add - add gateway node to list of available gateways
+ * batadv_gw_node_add() - add gateway node to list of available gateways
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: originator announcing gateway capabilities
* @gateway: announced bandwidth information
}
/**
- * batadv_gw_node_get - retrieve gateway node from list of available gateways
+ * batadv_gw_node_get() - retrieve gateway node from list of available gateways
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: originator announcing gateway capabilities
*
}
/**
- * batadv_gw_node_update - update list of available gateways with changed
+ * batadv_gw_node_update() - update list of available gateways with changed
* bandwidth information
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: originator announcing gateway capabilities
#endif
/**
- * batadv_gw_dump - Dump gateways into a message
+ * batadv_gw_dump() - Dump gateways into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
*
}
/**
- * batadv_gw_dhcp_recipient_get - check if a packet is a DHCP message
+ * batadv_gw_dhcp_recipient_get() - check if a packet is a DHCP message
* @skb: the packet to check
* @header_len: a pointer to the batman-adv header size
* @chaddr: buffer where the client address will be stored. Valid
}
/**
- * batadv_gw_out_of_range - check if the dhcp request destination is the best gw
+ * batadv_gw_out_of_range() - check if the dhcp request destination is the best
+ * gateway
* @bat_priv: the bat priv with all the soft interface information
* @skb: the outgoing packet
*
#include "tvlv.h"
/**
- * batadv_parse_throughput - parse supplied string buffer to extract throughput
- * information
+ * batadv_parse_throughput() - parse supplied string buffer to extract
+ * throughput information
* @net_dev: the soft interface net device
* @buff: string buffer to parse
* @description: text shown when throughput string cannot be parsed
}
/**
- * batadv_parse_gw_bandwidth - parse supplied string buffer to extract download
- * and upload bandwidth information
+ * batadv_parse_gw_bandwidth() - parse supplied string buffer to extract
+ * download and upload bandwidth information
* @net_dev: the soft interface net device
* @buff: string buffer to parse
* @down: pointer holding the returned download bandwidth information
}
/**
- * batadv_gw_tvlv_container_update - update the gw tvlv container after gateway
- * setting change
+ * batadv_gw_tvlv_container_update() - update the gw tvlv container after
+ * gateway setting change
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_gw_tvlv_container_update(struct batadv_priv *bat_priv)
}
/**
- * batadv_gw_tvlv_ogm_handler_v1 - process incoming gateway tvlv container
+ * batadv_gw_tvlv_ogm_handler_v1() - process incoming gateway tvlv container
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node of the ogm
* @flags: flags indicating the tvlv state (see batadv_tvlv_handler_flags)
}
/**
- * batadv_gw_init - initialise the gateway handling internals
+ * batadv_gw_init() - initialise the gateway handling internals
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_gw_init(struct batadv_priv *bat_priv)
}
/**
- * batadv_gw_free - free the gateway handling internals
+ * batadv_gw_free() - free the gateway handling internals
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_gw_free(struct batadv_priv *bat_priv)
#include "translation-table.h"
/**
- * batadv_hardif_release - release hard interface from lists and queue for
+ * batadv_hardif_release() - release hard interface from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the hard interface
*/
}
/**
- * batadv_getlink_net - return link net namespace (of use fallback)
+ * batadv_getlink_net() - return link net namespace (of use fallback)
* @netdev: net_device to check
* @fallback_net: return in case get_link_net is not available for @netdev
*
}
/**
- * batadv_mutual_parents - check if two devices are each others parent
+ * batadv_mutual_parents() - check if two devices are each others parent
* @dev1: 1st net dev
* @net1: 1st devices netns
* @dev2: 2nd net dev
}
/**
- * batadv_is_on_batman_iface - check if a device is a batman iface descendant
+ * batadv_is_on_batman_iface() - check if a device is a batman iface descendant
* @net_dev: the device to check
*
* If the user creates any virtual device on top of a batman-adv interface, it
}
/**
- * batadv_get_real_netdevice - check if the given netdev struct is a virtual
+ * batadv_get_real_netdevice() - check if the given netdev struct is a virtual
* interface on top of another 'real' interface
* @netdev: the device to check
*
}
/**
- * batadv_get_real_netdev - check if the given net_device struct is a virtual
+ * batadv_get_real_netdev() - check if the given net_device struct is a virtual
* interface on top of another 'real' interface
* @net_device: the device to check
*
}
/**
- * batadv_is_wext_netdev - check if the given net_device struct is a
+ * batadv_is_wext_netdev() - check if the given net_device struct is a
* wext wifi interface
* @net_device: the device to check
*
}
/**
- * batadv_is_cfg80211_netdev - check if the given net_device struct is a
+ * batadv_is_cfg80211_netdev() - check if the given net_device struct is a
* cfg80211 wifi interface
* @net_device: the device to check
*
}
/**
- * batadv_wifi_flags_evaluate - calculate wifi flags for net_device
+ * batadv_wifi_flags_evaluate() - calculate wifi flags for net_device
* @net_device: the device to check
*
* Return: batadv_hard_iface_wifi_flags flags of the device
}
/**
- * batadv_is_cfg80211_hardif - check if the given hardif is a cfg80211 wifi
+ * batadv_is_cfg80211_hardif() - check if the given hardif is a cfg80211 wifi
* interface
* @hard_iface: the device to check
*
}
/**
- * batadv_is_wifi_hardif - check if the given hardif is a wifi interface
+ * batadv_is_wifi_hardif() - check if the given hardif is a wifi interface
* @hard_iface: the device to check
*
* Return: true if the net device is a 802.11 wireless device, false otherwise.
}
/**
- * batadv_hardif_no_broadcast - check whether (re)broadcast is necessary
+ * batadv_hardif_no_broadcast() - check whether (re)broadcast is necessary
* @if_outgoing: the outgoing interface checked and considered for (re)broadcast
* @orig_addr: the originator of this packet
* @orig_neigh: originator address of the forwarder we just got the packet from
}
/**
- * batadv_master_del_slave - remove hard_iface from the current master interface
+ * batadv_master_del_slave() - remove hard_iface from the current master iface
* @slave: the interface enslaved in another master
* @master: the master from which slave has to be removed
*
u8 *orig_addr, u8 *orig_neigh);
/**
- * batadv_hardif_put - decrement the hard interface refcounter and possibly
+ * batadv_hardif_put() - decrement the hard interface refcounter and possibly
* release it
* @hard_iface: the hard interface to free
*/
void batadv_hash_destroy(struct batadv_hashtable *hash);
/**
- * batadv_hash_add - adds data to the hashtable
+ * batadv_hash_add() - adds data to the hashtable
* @hash: storage hash table
* @compare: callback to determine if 2 hash elements are identical
* @choose: callback calculating the hash index
}
/**
- * batadv_socket_add_packet - schedule an icmp packet to be sent to
+ * batadv_socket_add_packet() - schedule an icmp packet to be sent to
* userspace on an icmp socket.
* @socket_client: the socket this packet belongs to
* @icmph: pointer to the header of the icmp packet
}
/**
- * batadv_socket_receive_packet - schedule an icmp packet to be received
+ * batadv_socket_receive_packet() - schedule an icmp packet to be received
* locally and sent to userspace.
* @icmph: pointer to the header of the icmp packet
* @icmp_len: total length of the icmp packet
}
/**
- * batadv_is_my_mac - check if the given mac address belongs to any of the real
- * interfaces in the current mesh
+ * batadv_is_my_mac() - check if the given mac address belongs to any of the
+ * real interfaces in the current mesh
* @bat_priv: the bat priv with all the soft interface information
* @addr: the address to check
*
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_seq_print_text_primary_if_get - called from debugfs table printing
+ * batadv_seq_print_text_primary_if_get() - called from debugfs table printing
* function that requires the primary interface
* @seq: debugfs table seq_file struct
*
#endif
/**
- * batadv_max_header_len - calculate maximum encapsulation overhead for a
+ * batadv_max_header_len() - calculate maximum encapsulation overhead for a
* payload packet
*
* Return: the maximum encapsulation overhead in bytes.
}
/**
- * batadv_skb_set_priority - sets skb priority according to packet content
+ * batadv_skb_set_priority() - sets skb priority according to packet content
* @skb: the packet to be sent
* @offset: offset to the packet content
*
}
/**
- * batadv_skb_crc32 - calculate CRC32 of the whole packet and skip bytes in
+ * batadv_skb_crc32() - calculate CRC32 of the whole packet and skip bytes in
* the header
* @skb: skb pointing to fragmented socket buffers
* @payload_ptr: Pointer to position inside the head buffer of the skb
}
/**
- * batadv_get_vid - extract the VLAN identifier from skb if any
+ * batadv_get_vid() - extract the VLAN identifier from skb if any
* @skb: the buffer containing the packet
* @header_len: length of the batman header preceding the ethernet header
*
}
/**
- * batadv_vlan_ap_isola_get - return the AP isolation status for the given vlan
+ * batadv_vlan_ap_isola_get() - return AP isolation status for the given vlan
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier for which the AP isolation attributed as to be
* looked up
struct sk_buff;
/**
- * batadv_print_vid - return printable version of vid information
+ * batadv_print_vid() - return printable version of vid information
* @vid: the VLAN identifier
*
* Return: -1 when no VLAN is used, VLAN id otherwise
__be32 batadv_skb_crc32(struct sk_buff *skb, u8 *payload_ptr);
/**
- * batadv_compare_eth - Compare two not u16 aligned Ethernet addresses
+ * batadv_compare_eth() - Compare two not u16 aligned Ethernet addresses
* @data1: Pointer to a six-byte array containing the Ethernet address
* @data2: Pointer other six-byte array containing the Ethernet address
*
}
/**
- * batadv_has_timed_out - compares current time (jiffies) and timestamp +
+ * batadv_has_timed_out() - compares current time (jiffies) and timestamp +
* timeout
* @timestamp: base value to compare with (in jiffies)
* @timeout: added to base value before comparing (in milliseconds)
static void batadv_mcast_mla_update(struct work_struct *work);
/**
- * batadv_mcast_start_timer - schedule the multicast periodic worker
+ * batadv_mcast_start_timer() - schedule the multicast periodic worker
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_mcast_start_timer(struct batadv_priv *bat_priv)
}
/**
- * batadv_mcast_get_bridge - get the bridge on top of the softif if it exists
+ * batadv_mcast_get_bridge() - get the bridge on top of the softif if it exists
* @soft_iface: netdev struct of the mesh interface
*
* If the given soft interface has a bridge on top then the refcount
}
/**
- * batadv_mcast_mla_softif_get - get softif multicast listeners
+ * batadv_mcast_mla_softif_get() - get softif multicast listeners
* @dev: the device to collect multicast addresses from
* @mcast_list: a list to put found addresses into
*
}
/**
- * batadv_mcast_mla_is_duplicate - check whether an address is in a list
+ * batadv_mcast_mla_is_duplicate() - check whether an address is in a list
* @mcast_addr: the multicast address to check
* @mcast_list: the list with multicast addresses to search in
*
}
/**
- * batadv_mcast_mla_br_addr_cpy - copy a bridge multicast address
+ * batadv_mcast_mla_br_addr_cpy() - copy a bridge multicast address
* @dst: destination to write to - a multicast MAC address
* @src: source to read from - a multicast IP address
*
}
/**
- * batadv_mcast_mla_bridge_get - get bridged-in multicast listeners
+ * batadv_mcast_mla_bridge_get() - get bridged-in multicast listeners
* @dev: a bridge slave whose bridge to collect multicast addresses from
* @mcast_list: a list to put found addresses into
*
}
/**
- * batadv_mcast_mla_list_free - free a list of multicast addresses
+ * batadv_mcast_mla_list_free() - free a list of multicast addresses
* @mcast_list: the list to free
*
* Removes and frees all items in the given mcast_list.
}
/**
- * batadv_mcast_mla_tt_retract - clean up multicast listener announcements
+ * batadv_mcast_mla_tt_retract() - clean up multicast listener announcements
* @bat_priv: the bat priv with all the soft interface information
* @mcast_list: a list of addresses which should _not_ be removed
*
}
/**
- * batadv_mcast_mla_tt_add - add multicast listener announcements
+ * batadv_mcast_mla_tt_add() - add multicast listener announcements
* @bat_priv: the bat priv with all the soft interface information
* @mcast_list: a list of addresses which are going to get added
*
}
/**
- * batadv_mcast_has_bridge - check whether the soft-iface is bridged
+ * batadv_mcast_has_bridge() - check whether the soft-iface is bridged
* @bat_priv: the bat priv with all the soft interface information
*
* Checks whether there is a bridge on top of our soft interface.
}
/**
- * batadv_mcast_querier_log - debug output regarding the querier status on link
+ * batadv_mcast_querier_log() - debug output regarding the querier status on
+ * link
* @bat_priv: the bat priv with all the soft interface information
* @str_proto: a string for the querier protocol (e.g. "IGMP" or "MLD")
* @old_state: the previous querier state on our link
}
/**
- * batadv_mcast_bridge_log - debug output for topology changes in bridged setups
+ * batadv_mcast_bridge_log() - debug output for topology changes in bridged
+ * setups
* @bat_priv: the bat priv with all the soft interface information
* @bridged: a flag about whether the soft interface is currently bridged or not
* @querier_ipv4: (maybe) new status of a potential, selected IGMP querier
}
/**
- * batadv_mcast_flags_logs - output debug information about mcast flag changes
+ * batadv_mcast_flags_logs() - output debug information about mcast flag changes
* @bat_priv: the bat priv with all the soft interface information
* @flags: flags indicating the new multicast state
*
}
/**
- * batadv_mcast_mla_tvlv_update - update multicast tvlv
+ * batadv_mcast_mla_tvlv_update() - update multicast tvlv
* @bat_priv: the bat priv with all the soft interface information
*
* Updates the own multicast tvlv with our current multicast related settings,
}
/**
- * __batadv_mcast_mla_update - update the own MLAs
+ * __batadv_mcast_mla_update() - update the own MLAs
* @bat_priv: the bat priv with all the soft interface information
*
* Updates the own multicast listener announcements in the translation
}
/**
- * batadv_mcast_mla_update - update the own MLAs
+ * batadv_mcast_mla_update() - update the own MLAs
* @work: kernel work struct
*
* Updates the own multicast listener announcements in the translation
}
/**
- * batadv_mcast_is_report_ipv4 - check for IGMP reports
+ * batadv_mcast_is_report_ipv4() - check for IGMP reports
* @skb: the ethernet frame destined for the mesh
*
* This call might reallocate skb data.
}
/**
- * batadv_mcast_forw_mode_check_ipv4 - check for optimized forwarding potential
+ * batadv_mcast_forw_mode_check_ipv4() - check for optimized forwarding
+ * potential
* @bat_priv: the bat priv with all the soft interface information
* @skb: the IPv4 packet to check
* @is_unsnoopable: stores whether the destination is snoopable
}
/**
- * batadv_mcast_is_report_ipv6 - check for MLD reports
+ * batadv_mcast_is_report_ipv6() - check for MLD reports
* @skb: the ethernet frame destined for the mesh
*
* This call might reallocate skb data.
}
/**
- * batadv_mcast_forw_mode_check_ipv6 - check for optimized forwarding potential
+ * batadv_mcast_forw_mode_check_ipv6() - check for optimized forwarding
+ * potential
* @bat_priv: the bat priv with all the soft interface information
* @skb: the IPv6 packet to check
* @is_unsnoopable: stores whether the destination is snoopable
}
/**
- * batadv_mcast_forw_mode_check - check for optimized forwarding potential
+ * batadv_mcast_forw_mode_check() - check for optimized forwarding potential
* @bat_priv: the bat priv with all the soft interface information
* @skb: the multicast frame to check
* @is_unsnoopable: stores whether the destination is snoopable
}
/**
- * batadv_mcast_forw_want_all_ip_count - count nodes with unspecific mcast
+ * batadv_mcast_forw_want_all_ip_count() - count nodes with unspecific mcast
* interest
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: ethernet header of a packet
}
/**
- * batadv_mcast_forw_tt_node_get - get a multicast tt node
+ * batadv_mcast_forw_tt_node_get() - get a multicast tt node
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: the ether header containing the multicast destination
*
}
/**
- * batadv_mcast_forw_ipv4_node_get - get a node with an ipv4 flag
+ * batadv_mcast_forw_ipv4_node_get() - get a node with an ipv4 flag
* @bat_priv: the bat priv with all the soft interface information
*
* Return: an orig_node which has the BATADV_MCAST_WANT_ALL_IPV4 flag set and
}
/**
- * batadv_mcast_forw_ipv6_node_get - get a node with an ipv6 flag
+ * batadv_mcast_forw_ipv6_node_get() - get a node with an ipv6 flag
* @bat_priv: the bat priv with all the soft interface information
*
* Return: an orig_node which has the BATADV_MCAST_WANT_ALL_IPV6 flag set
}
/**
- * batadv_mcast_forw_ip_node_get - get a node with an ipv4/ipv6 flag
+ * batadv_mcast_forw_ip_node_get() - get a node with an ipv4/ipv6 flag
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: an ethernet header to determine the protocol family from
*
}
/**
- * batadv_mcast_forw_unsnoop_node_get - get a node with an unsnoopable flag
+ * batadv_mcast_forw_unsnoop_node_get() - get a node with an unsnoopable flag
* @bat_priv: the bat priv with all the soft interface information
*
* Return: an orig_node which has the BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag
}
/**
- * batadv_mcast_forw_mode - check on how to forward a multicast packet
+ * batadv_mcast_forw_mode() - check on how to forward a multicast packet
* @bat_priv: the bat priv with all the soft interface information
* @skb: The multicast packet to check
* @orig: an originator to be set to forward the skb to
}
/**
- * batadv_mcast_want_unsnoop_update - update unsnoop counter and list
+ * batadv_mcast_want_unsnoop_update() - update unsnoop counter and list
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node which multicast state might have changed of
* @mcast_flags: flags indicating the new multicast state
}
/**
- * batadv_mcast_want_ipv4_update - update want-all-ipv4 counter and list
+ * batadv_mcast_want_ipv4_update() - update want-all-ipv4 counter and list
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node which multicast state might have changed of
* @mcast_flags: flags indicating the new multicast state
}
/**
- * batadv_mcast_want_ipv6_update - update want-all-ipv6 counter and list
+ * batadv_mcast_want_ipv6_update() - update want-all-ipv6 counter and list
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node which multicast state might have changed of
* @mcast_flags: flags indicating the new multicast state
}
/**
- * batadv_mcast_tvlv_ogm_handler - process incoming multicast tvlv container
+ * batadv_mcast_tvlv_ogm_handler() - process incoming multicast tvlv container
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node of the ogm
* @flags: flags indicating the tvlv state (see batadv_tvlv_handler_flags)
}
/**
- * batadv_mcast_init - initialize the multicast optimizations structures
+ * batadv_mcast_init() - initialize the multicast optimizations structures
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_mcast_init(struct batadv_priv *bat_priv)
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_mcast_flags_print_header - print own mcast flags to debugfs table
+ * batadv_mcast_flags_print_header() - print own mcast flags to debugfs table
* @bat_priv: the bat priv with all the soft interface information
* @seq: debugfs table seq_file struct
*
}
/**
- * batadv_mcast_flags_seq_print_text - print the mcast flags of other nodes
+ * batadv_mcast_flags_seq_print_text() - print the mcast flags of other nodes
* @seq: seq file to print on
* @offset: not used
*
#endif
/**
- * batadv_mcast_free - free the multicast optimizations structures
+ * batadv_mcast_free() - free the multicast optimizations structures
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_mcast_free(struct batadv_priv *bat_priv)
}
/**
- * batadv_mcast_purge_orig - reset originator global mcast state modifications
+ * batadv_mcast_purge_orig() - reset originator global mcast state modifications
* @orig: the originator which is going to get purged
*/
void batadv_mcast_purge_orig(struct batadv_orig_node *orig)
};
/**
- * batadv_netlink_get_ifindex - Extract an interface index from a message
+ * batadv_netlink_get_ifindex() - Extract an interface index from a message
* @nlh: Message header
* @attrtype: Attribute which holds an interface index
*
}
/**
- * batadv_netlink_mesh_info_put - fill in generic information about mesh
+ * batadv_netlink_mesh_info_put() - fill in generic information about mesh
* interface
* @msg: netlink message to be sent back
* @soft_iface: interface for which the data should be taken
}
/**
- * batadv_netlink_get_mesh_info - handle incoming BATADV_CMD_GET_MESH_INFO
+ * batadv_netlink_get_mesh_info() - handle incoming BATADV_CMD_GET_MESH_INFO
* netlink request
* @skb: received netlink message
* @info: receiver information
}
/**
- * batadv_netlink_tp_meter_put - Fill information of started tp_meter session
+ * batadv_netlink_tp_meter_put() - Fill information of started tp_meter session
* @msg: netlink message to be sent back
* @cookie: tp meter session cookie
*
}
/**
- * batadv_netlink_tpmeter_notify - send tp_meter result via netlink to client
+ * batadv_netlink_tpmeter_notify() - send tp_meter result via netlink to client
* @bat_priv: the bat priv with all the soft interface information
* @dst: destination of tp_meter session
* @result: reason for tp meter session stop
}
/**
- * batadv_netlink_tp_meter_start - Start a new tp_meter session
+ * batadv_netlink_tp_meter_start() - Start a new tp_meter session
* @skb: received netlink message
* @info: receiver information
*
}
/**
- * batadv_netlink_tp_meter_start - Cancel a running tp_meter session
+ * batadv_netlink_tp_meter_start() - Cancel a running tp_meter session
* @skb: received netlink message
* @info: receiver information
*
}
/**
- * batadv_netlink_dump_hardif_entry - Dump one hard interface into a message
+ * batadv_netlink_dump_hardif_entry() - Dump one hard interface into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_netlink_dump_hardifs - Dump all hard interface into a messages
+ * batadv_netlink_dump_hardifs() - Dump all hard interface into a messages
* @msg: Netlink message to dump into
* @cb: Parameters from query
*
};
/**
- * batadv_netlink_register - register batadv genl netlink family
+ * batadv_netlink_register() - register batadv genl netlink family
*/
void __init batadv_netlink_register(void)
{
}
/**
- * batadv_netlink_unregister - unregister batadv genl netlink family
+ * batadv_netlink_unregister() - unregister batadv genl netlink family
*/
void batadv_netlink_unregister(void)
{
struct batadv_hard_iface *recv_if);
/**
- * batadv_nc_init - one-time initialization for network coding
+ * batadv_nc_init() - one-time initialization for network coding
*
* Return: 0 on success or negative error number in case of failure
*/
}
/**
- * batadv_nc_start_timer - initialise the nc periodic worker
+ * batadv_nc_start_timer() - initialise the nc periodic worker
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_nc_start_timer(struct batadv_priv *bat_priv)
}
/**
- * batadv_nc_tvlv_container_update - update the network coding tvlv container
+ * batadv_nc_tvlv_container_update() - update the network coding tvlv container
* after network coding setting change
* @bat_priv: the bat priv with all the soft interface information
*/
}
/**
- * batadv_nc_status_update - update the network coding tvlv container after
+ * batadv_nc_status_update() - update the network coding tvlv container after
* network coding setting change
* @net_dev: the soft interface net device
*/
}
/**
- * batadv_nc_tvlv_ogm_handler_v1 - process incoming nc tvlv container
+ * batadv_nc_tvlv_ogm_handler_v1() - process incoming nc tvlv container
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node of the ogm
* @flags: flags indicating the tvlv state (see batadv_tvlv_handler_flags)
}
/**
- * batadv_nc_mesh_init - initialise coding hash table and start house keeping
+ * batadv_nc_mesh_init() - initialise coding hash table and start house keeping
* @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 on success or negative error number in case of failure
}
/**
- * batadv_nc_init_bat_priv - initialise the nc specific bat_priv variables
+ * batadv_nc_init_bat_priv() - initialise the nc specific bat_priv variables
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_nc_init_bat_priv(struct batadv_priv *bat_priv)
}
/**
- * batadv_nc_init_orig - initialise the nc fields of an orig_node
+ * batadv_nc_init_orig() - initialise the nc fields of an orig_node
* @orig_node: the orig_node which is going to be initialised
*/
void batadv_nc_init_orig(struct batadv_orig_node *orig_node)
}
/**
- * batadv_nc_node_release - release nc_node from lists and queue for free after
- * rcu grace period
+ * batadv_nc_node_release() - release nc_node from lists and queue for free
+ * after rcu grace period
* @ref: kref pointer of the nc_node
*/
static void batadv_nc_node_release(struct kref *ref)
}
/**
- * batadv_nc_node_put - decrement the nc_node refcounter and possibly
+ * batadv_nc_node_put() - decrement the nc_node refcounter and possibly
* release it
* @nc_node: nc_node to be free'd
*/
}
/**
- * batadv_nc_path_release - release nc_path from lists and queue for free after
- * rcu grace period
+ * batadv_nc_path_release() - release nc_path from lists and queue for free
+ * after rcu grace period
* @ref: kref pointer of the nc_path
*/
static void batadv_nc_path_release(struct kref *ref)
}
/**
- * batadv_nc_path_put - decrement the nc_path refcounter and possibly
+ * batadv_nc_path_put() - decrement the nc_path refcounter and possibly
* release it
* @nc_path: nc_path to be free'd
*/
}
/**
- * batadv_nc_packet_free - frees nc packet
+ * batadv_nc_packet_free() - frees nc packet
* @nc_packet: the nc packet to free
* @dropped: whether the packet is freed because is is dropped
*/
}
/**
- * batadv_nc_to_purge_nc_node - checks whether an nc node has to be purged
+ * batadv_nc_to_purge_nc_node() - checks whether an nc node has to be purged
* @bat_priv: the bat priv with all the soft interface information
* @nc_node: the nc node to check
*
}
/**
- * batadv_nc_to_purge_nc_path_coding - checks whether an nc path has timed out
+ * batadv_nc_to_purge_nc_path_coding() - checks whether an nc path has timed out
* @bat_priv: the bat priv with all the soft interface information
* @nc_path: the nc path to check
*
}
/**
- * batadv_nc_to_purge_nc_path_decoding - checks whether an nc path has timed out
+ * batadv_nc_to_purge_nc_path_decoding() - checks whether an nc path has timed
+ * out
* @bat_priv: the bat priv with all the soft interface information
* @nc_path: the nc path to check
*
}
/**
- * batadv_nc_purge_orig_nc_nodes - go through list of nc nodes and purge stale
+ * batadv_nc_purge_orig_nc_nodes() - go through list of nc nodes and purge stale
* entries
* @bat_priv: the bat priv with all the soft interface information
* @list: list of nc nodes
}
/**
- * batadv_nc_purge_orig - purges all nc node data attached of the given
+ * batadv_nc_purge_orig() - purges all nc node data attached of the given
* originator
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig_node with the nc node entries to be purged
}
/**
- * batadv_nc_purge_orig_hash - traverse entire originator hash to check if they
- * have timed out nc nodes
+ * batadv_nc_purge_orig_hash() - traverse entire originator hash to check if
+ * they have timed out nc nodes
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_nc_purge_orig_hash(struct batadv_priv *bat_priv)
}
/**
- * batadv_nc_purge_paths - traverse all nc paths part of the hash and remove
+ * batadv_nc_purge_paths() - traverse all nc paths part of the hash and remove
* unused ones
* @bat_priv: the bat priv with all the soft interface information
* @hash: hash table containing the nc paths to check
}
/**
- * batadv_nc_hash_key_gen - computes the nc_path hash key
+ * batadv_nc_hash_key_gen() - computes the nc_path hash key
* @key: buffer to hold the final hash key
* @src: source ethernet mac address going into the hash key
* @dst: destination ethernet mac address going into the hash key
}
/**
- * batadv_nc_hash_choose - compute the hash value for an nc path
+ * batadv_nc_hash_choose() - compute the hash value for an nc path
* @data: data to hash
* @size: size of the hash table
*
}
/**
- * batadv_nc_hash_compare - comparing function used in the network coding hash
+ * batadv_nc_hash_compare() - comparing function used in the network coding hash
* tables
* @node: node in the local table
* @data2: second object to compare the node to
}
/**
- * batadv_nc_hash_find - search for an existing nc path and return it
+ * batadv_nc_hash_find() - search for an existing nc path and return it
* @hash: hash table containing the nc path
* @data: search key
*
}
/**
- * batadv_nc_send_packet - send non-coded packet and free nc_packet struct
+ * batadv_nc_send_packet() - send non-coded packet and free nc_packet struct
* @nc_packet: the nc packet to send
*/
static void batadv_nc_send_packet(struct batadv_nc_packet *nc_packet)
}
/**
- * batadv_nc_sniffed_purge - Checks timestamp of given sniffed nc_packet.
+ * batadv_nc_sniffed_purge() - Checks timestamp of given sniffed nc_packet.
* @bat_priv: the bat priv with all the soft interface information
* @nc_path: the nc path the packet belongs to
* @nc_packet: the nc packet to be checked
}
/**
- * batadv_nc_fwd_flush - Checks the timestamp of the given nc packet.
+ * batadv_nc_fwd_flush() - Checks the timestamp of the given nc packet.
* @bat_priv: the bat priv with all the soft interface information
* @nc_path: the nc path the packet belongs to
* @nc_packet: the nc packet to be checked
}
/**
- * batadv_nc_process_nc_paths - traverse given nc packet pool and free timed out
- * nc packets
+ * batadv_nc_process_nc_paths() - traverse given nc packet pool and free timed
+ * out nc packets
* @bat_priv: the bat priv with all the soft interface information
* @hash: to be processed hash table
* @process_fn: Function called to process given nc packet. Should return true
}
/**
- * batadv_nc_worker - periodic task for house keeping related to network coding
+ * batadv_nc_worker() - periodic task for house keeping related to network
+ * coding
* @work: kernel work struct
*/
static void batadv_nc_worker(struct work_struct *work)
}
/**
- * batadv_can_nc_with_orig - checks whether the given orig node is suitable for
- * coding or not
+ * batadv_can_nc_with_orig() - checks whether the given orig node is suitable
+ * for coding or not
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: neighboring orig node which may be used as nc candidate
* @ogm_packet: incoming ogm packet also used for the checks
}
/**
- * batadv_nc_find_nc_node - search for an existing nc node and return it
+ * batadv_nc_find_nc_node() - search for an existing nc node and return it
* @orig_node: orig node originating the ogm packet
* @orig_neigh_node: neighboring orig node from which we received the ogm packet
* (can be equal to orig_node)
}
/**
- * batadv_nc_get_nc_node - retrieves an nc node or creates the entry if it was
+ * batadv_nc_get_nc_node() - retrieves an nc node or creates the entry if it was
* not found
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node originating the ogm packet
}
/**
- * batadv_nc_update_nc_node - updates stored incoming and outgoing nc node
+ * batadv_nc_update_nc_node() - updates stored incoming and outgoing nc node
* structs (best called on incoming OGMs)
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node originating the ogm packet
}
/**
- * batadv_nc_get_path - get existing nc_path or allocate a new one
+ * batadv_nc_get_path() - get existing nc_path or allocate a new one
* @bat_priv: the bat priv with all the soft interface information
* @hash: hash table containing the nc path
* @src: ethernet source address - first half of the nc path search key
}
/**
- * batadv_nc_random_weight_tq - scale the receivers TQ-value to avoid unfair
+ * batadv_nc_random_weight_tq() - scale the receivers TQ-value to avoid unfair
* selection of a receiver with slightly lower TQ than the other
* @tq: to be weighted tq value
*
}
/**
- * batadv_nc_memxor - XOR destination with source
+ * batadv_nc_memxor() - XOR destination with source
* @dst: byte array to XOR into
* @src: byte array to XOR from
* @len: length of destination array
}
/**
- * batadv_nc_code_packets - code a received unicast_packet with an nc packet
+ * batadv_nc_code_packets() - code a received unicast_packet with an nc packet
* into a coded_packet and send it
* @bat_priv: the bat priv with all the soft interface information
* @skb: data skb to forward
}
/**
- * batadv_nc_skb_coding_possible - true if a decoded skb is available at dst.
+ * batadv_nc_skb_coding_possible() - true if a decoded skb is available at dst.
* @skb: data skb to forward
* @dst: destination mac address of the other skb to code with
* @src: source mac address of skb
}
/**
- * batadv_nc_path_search - Find the coding path matching in_nc_node and
+ * batadv_nc_path_search() - Find the coding path matching in_nc_node and
* out_nc_node to retrieve a buffered packet that can be used for coding.
* @bat_priv: the bat priv with all the soft interface information
* @in_nc_node: pointer to skb next hop's neighbor nc node
}
/**
- * batadv_nc_skb_src_search - Loops through the list of neighoring nodes of the
- * skb's sender (may be equal to the originator).
+ * batadv_nc_skb_src_search() - Loops through the list of neighoring nodes of
+ * the skb's sender (may be equal to the originator).
* @bat_priv: the bat priv with all the soft interface information
* @skb: data skb to forward
* @eth_dst: next hop mac address of skb
}
/**
- * batadv_nc_skb_store_before_coding - set the ethernet src and dst of the
+ * batadv_nc_skb_store_before_coding() - set the ethernet src and dst of the
* unicast skb before it is stored for use in later decoding
* @bat_priv: the bat priv with all the soft interface information
* @skb: data skb to store
}
/**
- * batadv_nc_skb_dst_search - Loops through list of neighboring nodes to dst.
+ * batadv_nc_skb_dst_search() - Loops through list of neighboring nodes to dst.
* @skb: data skb to forward
* @neigh_node: next hop to forward packet to
* @ethhdr: pointer to the ethernet header inside the skb
}
/**
- * batadv_nc_skb_add_to_path - buffer skb for later encoding / decoding
+ * batadv_nc_skb_add_to_path() - buffer skb for later encoding / decoding
* @skb: skb to add to path
* @nc_path: path to add skb to
* @neigh_node: next hop to forward packet to
}
/**
- * batadv_nc_skb_forward - try to code a packet or add it to the coding packet
+ * batadv_nc_skb_forward() - try to code a packet or add it to the coding packet
* buffer
* @skb: data skb to forward
* @neigh_node: next hop to forward packet to
}
/**
- * batadv_nc_skb_store_for_decoding - save a clone of the skb which can be used
- * when decoding coded packets
+ * batadv_nc_skb_store_for_decoding() - save a clone of the skb which can be
+ * used when decoding coded packets
* @bat_priv: the bat priv with all the soft interface information
* @skb: data skb to store
*/
}
/**
- * batadv_nc_skb_store_sniffed_unicast - check if a received unicast packet
+ * batadv_nc_skb_store_sniffed_unicast() - check if a received unicast packet
* should be saved in the decoding buffer and, if so, store it there
* @bat_priv: the bat priv with all the soft interface information
* @skb: unicast skb to store
}
/**
- * batadv_nc_skb_decode_packet - decode given skb using the decode data stored
+ * batadv_nc_skb_decode_packet() - decode given skb using the decode data stored
* in nc_packet
* @bat_priv: the bat priv with all the soft interface information
* @skb: unicast skb to decode
}
/**
- * batadv_nc_find_decoding_packet - search through buffered decoding data to
+ * batadv_nc_find_decoding_packet() - search through buffered decoding data to
* find the data needed to decode the coded packet
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: pointer to the ethernet header inside the coded packet
}
/**
- * batadv_nc_recv_coded_packet - try to decode coded packet and enqueue the
+ * batadv_nc_recv_coded_packet() - try to decode coded packet and enqueue the
* resulting unicast packet
* @skb: incoming coded packet
* @recv_if: pointer to interface this packet was received on
}
/**
- * batadv_nc_mesh_free - clean up network coding memory
+ * batadv_nc_mesh_free() - clean up network coding memory
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_nc_nodes_seq_print_text - print the nc node information
+ * batadv_nc_nodes_seq_print_text() - print the nc node information
* @seq: seq file to print on
* @offset: not used
*
}
/**
- * batadv_nc_init_debugfs - create nc folder and related files in debugfs
+ * batadv_nc_init_debugfs() - create nc folder and related files in debugfs
* @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 on success or negative error number in case of failure
static void batadv_purge_orig(struct work_struct *work);
/**
- * batadv_compare_orig - comparing function used in the originator hash table
+ * batadv_compare_orig() - comparing function used in the originator hash table
* @node: node in the local table
* @data2: second object to compare the node to
*
}
/**
- * batadv_orig_node_vlan_get - get an orig_node_vlan object
+ * batadv_orig_node_vlan_get() - get an orig_node_vlan object
* @orig_node: the originator serving the VLAN
* @vid: the VLAN identifier
*
}
/**
- * batadv_orig_node_vlan_new - search and possibly create an orig_node_vlan
+ * batadv_orig_node_vlan_new() - search and possibly create an orig_node_vlan
* object
* @orig_node: the originator serving the VLAN
* @vid: the VLAN identifier
}
/**
- * batadv_orig_node_vlan_release - release originator-vlan object from lists
+ * batadv_orig_node_vlan_release() - release originator-vlan object from lists
* and queue for free after rcu grace period
* @ref: kref pointer of the originator-vlan object
*/
}
/**
- * batadv_orig_node_vlan_put - decrement the refcounter and possibly release
+ * batadv_orig_node_vlan_put() - decrement the refcounter and possibly release
* the originator-vlan object
* @orig_vlan: the originator-vlan object to release
*/
}
/**
- * batadv_neigh_ifinfo_release - release neigh_ifinfo from lists and queue for
+ * batadv_neigh_ifinfo_release() - release neigh_ifinfo from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the neigh_ifinfo
*/
}
/**
- * batadv_neigh_ifinfo_put - decrement the refcounter and possibly release
+ * batadv_neigh_ifinfo_put() - decrement the refcounter and possibly release
* the neigh_ifinfo
* @neigh_ifinfo: the neigh_ifinfo object to release
*/
}
/**
- * batadv_hardif_neigh_release - release hardif neigh node from lists and
+ * batadv_hardif_neigh_release() - release hardif neigh node from lists and
* queue for free after rcu grace period
* @ref: kref pointer of the neigh_node
*/
}
/**
- * batadv_hardif_neigh_put - decrement the hardif neighbors refcounter
+ * batadv_hardif_neigh_put() - decrement the hardif neighbors refcounter
* and possibly release it
* @hardif_neigh: hardif neigh neighbor to free
*/
}
/**
- * batadv_neigh_node_release - release neigh_node from lists and queue for
+ * batadv_neigh_node_release() - release neigh_node from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the neigh_node
*/
}
/**
- * batadv_neigh_node_put - decrement the neighbors refcounter and possibly
+ * batadv_neigh_node_put() - decrement the neighbors refcounter and possibly
* release it
* @neigh_node: neigh neighbor to free
*/
}
/**
- * batadv_orig_router_get - router to the originator depending on iface
+ * batadv_orig_router_get() - router to the originator depending on iface
* @orig_node: the orig node for the router
* @if_outgoing: the interface where the payload packet has been received or
* the OGM should be sent to
}
/**
- * batadv_orig_ifinfo_get - find the ifinfo from an orig_node
+ * batadv_orig_ifinfo_get() - find the ifinfo from an orig_node
* @orig_node: the orig node to be queried
* @if_outgoing: the interface for which the ifinfo should be acquired
*
}
/**
- * batadv_orig_ifinfo_new - search and possibly create an orig_ifinfo object
+ * batadv_orig_ifinfo_new() - search and possibly create an orig_ifinfo object
* @orig_node: the orig node to be queried
* @if_outgoing: the interface for which the ifinfo should be acquired
*
}
/**
- * batadv_neigh_ifinfo_get - find the ifinfo from an neigh_node
+ * batadv_neigh_ifinfo_get() - find the ifinfo from an neigh_node
* @neigh: the neigh node to be queried
* @if_outgoing: the interface for which the ifinfo should be acquired
*
}
/**
- * batadv_neigh_ifinfo_new - search and possibly create an neigh_ifinfo object
+ * batadv_neigh_ifinfo_new() - search and possibly create an neigh_ifinfo object
* @neigh: the neigh node to be queried
* @if_outgoing: the interface for which the ifinfo should be acquired
*
}
/**
- * batadv_neigh_node_get - retrieve a neighbour from the list
+ * batadv_neigh_node_get() - retrieve a neighbour from the list
* @orig_node: originator which the neighbour belongs to
* @hard_iface: the interface where this neighbour is connected to
* @addr: the address of the neighbour
}
/**
- * batadv_hardif_neigh_create - create a hardif neighbour node
+ * batadv_hardif_neigh_create() - create a hardif neighbour node
* @hard_iface: the interface this neighbour is connected to
* @neigh_addr: the interface address of the neighbour to retrieve
* @orig_node: originator object representing the neighbour
}
/**
- * batadv_hardif_neigh_get_or_create - retrieve or create a hardif neighbour
+ * batadv_hardif_neigh_get_or_create() - retrieve or create a hardif neighbour
* node
* @hard_iface: the interface this neighbour is connected to
* @neigh_addr: the interface address of the neighbour to retrieve
}
/**
- * batadv_hardif_neigh_get - retrieve a hardif neighbour from the list
+ * batadv_hardif_neigh_get() - retrieve a hardif neighbour from the list
* @hard_iface: the interface where this neighbour is connected to
* @neigh_addr: the address of the neighbour
*
}
/**
- * batadv_neigh_node_create - create a neigh node object
+ * batadv_neigh_node_create() - create a neigh node object
* @orig_node: originator object representing the neighbour
* @hard_iface: the interface where the neighbour is connected to
* @neigh_addr: the mac address of the neighbour interface
}
/**
- * batadv_neigh_node_get_or_create - retrieve or create a neigh node object
+ * batadv_neigh_node_get_or_create() - retrieve or create a neigh node object
* @orig_node: originator object representing the neighbour
* @hard_iface: the interface where the neighbour is connected to
* @neigh_addr: the mac address of the neighbour interface
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_hardif_neigh_seq_print_text - print the single hop neighbour list
+ * batadv_hardif_neigh_seq_print_text() - print the single hop neighbour list
* @seq: neighbour table seq_file struct
* @offset: not used
*
#endif
/**
- * batadv_hardif_neigh_dump - Dump to netlink the neighbor infos for a specific
- * outgoing interface
+ * batadv_hardif_neigh_dump() - Dump to netlink the neighbor infos for a
+ * specific outgoing interface
* @msg: message to dump into
* @cb: parameters for the dump
*
}
/**
- * batadv_orig_ifinfo_release - release orig_ifinfo from lists and queue for
+ * batadv_orig_ifinfo_release() - release orig_ifinfo from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the orig_ifinfo
*/
}
/**
- * batadv_orig_ifinfo_put - decrement the refcounter and possibly release
+ * batadv_orig_ifinfo_put() - decrement the refcounter and possibly release
* the orig_ifinfo
* @orig_ifinfo: the orig_ifinfo object to release
*/
}
/**
- * batadv_orig_node_free_rcu - free the orig_node
+ * batadv_orig_node_free_rcu() - free the orig_node
* @rcu: rcu pointer of the orig_node
*/
static void batadv_orig_node_free_rcu(struct rcu_head *rcu)
}
/**
- * batadv_orig_node_release - release orig_node from lists and queue for
+ * batadv_orig_node_release() - release orig_node from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the orig_node
*/
}
/**
- * batadv_orig_node_put - decrement the orig node refcounter and possibly
+ * batadv_orig_node_put() - decrement the orig node refcounter and possibly
* release it
* @orig_node: the orig node to free
*/
}
/**
- * batadv_orig_node_new - creates a new orig_node
+ * batadv_orig_node_new() - creates a new orig_node
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the originator
*
}
/**
- * batadv_purge_neigh_ifinfo - purge obsolete ifinfo entries from neighbor
+ * batadv_purge_neigh_ifinfo() - purge obsolete ifinfo entries from neighbor
* @bat_priv: the bat priv with all the soft interface information
* @neigh: orig node which is to be checked
*/
}
/**
- * batadv_purge_orig_ifinfo - purge obsolete ifinfo entries from originator
+ * batadv_purge_orig_ifinfo() - purge obsolete ifinfo entries from originator
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node which is to be checked
*
}
/**
- * batadv_purge_orig_neighbors - purges neighbors from originator
+ * batadv_purge_orig_neighbors() - purges neighbors from originator
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node which is to be checked
*
}
/**
- * batadv_find_best_neighbor - finds the best neighbor after purging
+ * batadv_find_best_neighbor() - finds the best neighbor after purging
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node which is to be checked
* @if_outgoing: the interface for which the metric should be compared
}
/**
- * batadv_purge_orig_node - purges obsolete information from an orig_node
+ * batadv_purge_orig_node() - purges obsolete information from an orig_node
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node which is to be checked
*
}
/**
- * batadv_orig_hardif_seq_print_text - writes originator infos for a specific
+ * batadv_orig_hardif_seq_print_text() - writes originator infos for a specific
* outgoing interface
* @seq: debugfs table seq_file struct
* @offset: not used
#endif
/**
- * batadv_orig_dump - Dump to netlink the originator infos for a specific
+ * batadv_orig_dump() - Dump to netlink the originator infos for a specific
* outgoing interface
* @msg: message to dump into
* @cb: parameters for the dump
struct batadv_hard_iface *recv_if);
/**
- * _batadv_update_route - set the router for this originator
+ * _batadv_update_route() - set the router for this originator
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node which is to be configured
* @recv_if: the receive interface for which this route is set
}
/**
- * batadv_update_route - set the router for this originator
+ * batadv_update_route() - set the router for this originator
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node which is to be configured
* @recv_if: the receive interface for which this route is set
}
/**
- * batadv_window_protected - checks whether the host restarted and is in the
+ * batadv_window_protected() - checks whether the host restarted and is in the
* protection time.
* @bat_priv: the bat priv with all the soft interface information
* @seq_num_diff: difference between the current/received sequence number and
}
/**
- * batadv_recv_my_icmp_packet - receive an icmp packet locally
+ * batadv_recv_my_icmp_packet() - receive an icmp packet locally
* @bat_priv: the bat priv with all the soft interface information
* @skb: icmp packet to process
*
}
/**
- * batadv_check_unicast_packet - Check for malformed unicast packets
+ * batadv_check_unicast_packet() - Check for malformed unicast packets
* @bat_priv: the bat priv with all the soft interface information
* @skb: packet to check
* @hdr_size: size of header to pull
}
/**
- * batadv_last_bonding_get - Get last_bonding_candidate of orig_node
+ * batadv_last_bonding_get() - Get last_bonding_candidate of orig_node
* @orig_node: originator node whose last bonding candidate should be retrieved
*
* Return: last bonding candidate of router or NULL if not found
}
/**
- * batadv_last_bonding_replace - Replace last_bonding_candidate of orig_node
+ * batadv_last_bonding_replace() - Replace last_bonding_candidate of orig_node
* @orig_node: originator node whose bonding candidates should be replaced
* @new_candidate: new bonding candidate or NULL
*/
}
/**
- * batadv_find_router - find a suitable router for this originator
+ * batadv_find_router() - find a suitable router for this originator
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: the destination node
* @recv_if: pointer to interface this packet was received on
}
/**
- * batadv_reroute_unicast_packet - update the unicast header for re-routing
+ * batadv_reroute_unicast_packet() - update the unicast header for re-routing
* @bat_priv: the bat priv with all the soft interface information
* @unicast_packet: the unicast header to be updated
* @dst_addr: the payload destination
}
/**
- * batadv_recv_unhandled_unicast_packet - receive and process packets which
+ * batadv_recv_unhandled_unicast_packet() - receive and process packets which
* are in the unicast number space but not yet known to the implementation
* @skb: unicast tvlv packet to process
* @recv_if: pointer to interface this packet was received on
}
/**
- * batadv_recv_unicast_tvlv - receive and process unicast tvlv packets
+ * batadv_recv_unicast_tvlv() - receive and process unicast tvlv packets
* @skb: unicast tvlv packet to process
* @recv_if: pointer to interface this packet was received on
*
}
/**
- * batadv_recv_frag_packet - process received fragment
+ * batadv_recv_frag_packet() - process received fragment
* @skb: the received fragment
* @recv_if: interface that the skb is received on
*
static void batadv_send_outstanding_bcast_packet(struct work_struct *work);
/**
- * batadv_send_skb_packet - send an already prepared packet
+ * batadv_send_skb_packet() - send an already prepared packet
* @skb: the packet to send
* @hard_iface: the interface to use to send the broadcast packet
* @dst_addr: the payload destination
}
/**
- * batadv_send_skb_to_orig - Lookup next-hop and transmit skb.
+ * batadv_send_skb_to_orig() - Lookup next-hop and transmit skb.
* @skb: Packet to be transmitted.
* @orig_node: Final destination of the packet.
* @recv_if: Interface used when receiving the packet (can be NULL).
}
/**
- * batadv_send_skb_push_fill_unicast - extend the buffer and initialize the
+ * batadv_send_skb_push_fill_unicast() - extend the buffer and initialize the
* common fields for unicast packets
* @skb: the skb carrying the unicast header to initialize
* @hdr_size: amount of bytes to push at the beginning of the skb
}
/**
- * batadv_send_skb_prepare_unicast - encapsulate an skb with a unicast header
+ * batadv_send_skb_prepare_unicast() - encapsulate an skb with a unicast header
* @skb: the skb containing the payload to encapsulate
* @orig_node: the destination node
*
}
/**
- * batadv_send_skb_prepare_unicast_4addr - encapsulate an skb with a
+ * batadv_send_skb_prepare_unicast_4addr() - encapsulate an skb with a
* unicast 4addr header
* @bat_priv: the bat priv with all the soft interface information
* @skb: the skb containing the payload to encapsulate
}
/**
- * batadv_send_skb_unicast - encapsulate and send an skb via unicast
+ * batadv_send_skb_unicast() - encapsulate and send an skb via unicast
* @bat_priv: the bat priv with all the soft interface information
* @skb: payload to send
* @packet_type: the batman unicast packet type to use
}
/**
- * batadv_send_skb_via_tt_generic - send an skb via TT lookup
+ * batadv_send_skb_via_tt_generic() - send an skb via TT lookup
* @bat_priv: the bat priv with all the soft interface information
* @skb: payload to send
* @packet_type: the batman unicast packet type to use
}
/**
- * batadv_send_skb_via_gw - send an skb via gateway lookup
+ * batadv_send_skb_via_gw() - send an skb via gateway lookup
* @bat_priv: the bat priv with all the soft interface information
* @skb: payload to send
* @vid: the vid to be used to search the translation table
}
/**
- * batadv_forw_packet_free - free a forwarding packet
+ * batadv_forw_packet_free() - free a forwarding packet
* @forw_packet: The packet to free
* @dropped: whether the packet is freed because is is dropped
*
}
/**
- * batadv_forw_packet_alloc - allocate a forwarding packet
+ * batadv_forw_packet_alloc() - allocate a forwarding packet
* @if_incoming: The (optional) if_incoming to be grabbed
* @if_outgoing: The (optional) if_outgoing to be grabbed
* @queue_left: The (optional) queue counter to decrease
}
/**
- * batadv_forw_packet_was_stolen - check whether someone stole this packet
+ * batadv_forw_packet_was_stolen() - check whether someone stole this packet
* @forw_packet: the forwarding packet to check
*
* This function checks whether the given forwarding packet was claimed by
}
/**
- * batadv_forw_packet_steal - claim a forw_packet for free()
+ * batadv_forw_packet_steal() - claim a forw_packet for free()
* @forw_packet: the forwarding packet to steal
* @lock: a key to the store to steal from (e.g. forw_{bat,bcast}_list_lock)
*
}
/**
- * batadv_forw_packet_list_steal - claim a list of forward packets for free()
+ * batadv_forw_packet_list_steal() - claim a list of forward packets for free()
* @forw_list: the to be stolen forward packets
* @cleanup_list: a backup pointer, to be able to dispose the packet later
* @hard_iface: the interface to steal forward packets from
}
/**
- * batadv_forw_packet_list_free - free a list of forward packets
+ * batadv_forw_packet_list_free() - free a list of forward packets
* @head: a list of to be freed forw_packets
*
* This function cancels the scheduling of any packet in the provided list,
}
/**
- * batadv_forw_packet_queue - try to queue a forwarding packet
+ * batadv_forw_packet_queue() - try to queue a forwarding packet
* @forw_packet: the forwarding packet to queue
* @lock: a key to the store (e.g. forw_{bat,bcast}_list_lock)
* @head: the shelve to queue it on (e.g. forw_{bat,bcast}_list)
}
/**
- * batadv_forw_packet_bcast_queue - try to queue a broadcast packet
+ * batadv_forw_packet_bcast_queue() - try to queue a broadcast packet
* @bat_priv: the bat priv with all the soft interface information
* @forw_packet: the forwarding packet to queue
* @send_time: timestamp (jiffies) when the packet is to be sent
}
/**
- * batadv_forw_packet_ogmv1_queue - try to queue an OGMv1 packet
+ * batadv_forw_packet_ogmv1_queue() - try to queue an OGMv1 packet
* @bat_priv: the bat priv with all the soft interface information
* @forw_packet: the forwarding packet to queue
* @send_time: timestamp (jiffies) when the packet is to be sent
}
/**
- * batadv_add_bcast_packet_to_list - queue broadcast packet for multiple sends
+ * batadv_add_bcast_packet_to_list() - queue broadcast packet for multiple sends
* @bat_priv: the bat priv with all the soft interface information
* @skb: broadcast packet to add
* @delay: number of jiffies to wait before sending
}
/**
- * batadv_forw_packet_bcasts_left - check if a retransmission is necessary
+ * batadv_forw_packet_bcasts_left() - check if a retransmission is necessary
* @forw_packet: the forwarding packet to check
* @hard_iface: the interface to check on
*
}
/**
- * batadv_forw_packet_bcasts_inc - increment retransmission counter of a packet
+ * batadv_forw_packet_bcasts_inc() - increment retransmission counter of a
+ * packet
* @forw_packet: the packet to increase the counter for
*/
static void
}
/**
- * batadv_forw_packet_is_rebroadcast - check packet for previous transmissions
+ * batadv_forw_packet_is_rebroadcast() - check packet for previous transmissions
* @forw_packet: the packet to check
*
* Return: True if this packet was transmitted before, false otherwise.
}
/**
- * batadv_purge_outstanding_packets - stop/purge scheduled bcast/OGMv1 packets
+ * batadv_purge_outstanding_packets() - stop/purge scheduled bcast/OGMv1 packets
* @bat_priv: the bat priv with all the soft interface information
* @hard_iface: the hard interface to cancel and purge bcast/ogm packets on
*
unsigned short vid);
/**
- * batadv_send_skb_via_tt - send an skb via TT lookup
+ * batadv_send_skb_via_tt() - send an skb via TT lookup
* @bat_priv: the bat priv with all the soft interface information
* @skb: the payload to send
* @dst_hint: can be used to override the destination contained in the skb
}
/**
- * batadv_send_skb_via_tt_4addr - send an skb via TT lookup
+ * batadv_send_skb_via_tt_4addr() - send an skb via TT lookup
* @bat_priv: the bat priv with all the soft interface information
* @skb: the payload to send
* @packet_subtype: the unicast 4addr packet subtype to use
}
/**
- * batadv_sum_counter - Sum the cpu-local counters for index 'idx'
+ * batadv_sum_counter() - Sum the cpu-local counters for index 'idx'
* @bat_priv: the bat priv with all the soft interface information
* @idx: index of counter to sum up
*
}
/**
- * batadv_interface_set_rx_mode - set the rx mode of a device
+ * batadv_interface_set_rx_mode() - set the rx mode of a device
* @dev: registered network device to modify
*
* We do not actually need to set any rx filters for the virtual batman
}
/**
- * batadv_interface_rx - receive ethernet frame on local batman-adv interface
+ * batadv_interface_rx() - receive ethernet frame on local batman-adv interface
* @soft_iface: local interface which will receive the ethernet frame
* @skb: ethernet frame for @soft_iface
* @hdr_size: size of already parsed batman-adv header
}
/**
- * batadv_softif_vlan_release - release vlan from lists and queue for free after
- * rcu grace period
+ * batadv_softif_vlan_release() - release vlan from lists and queue for free
+ * after rcu grace period
* @ref: kref pointer of the vlan object
*/
static void batadv_softif_vlan_release(struct kref *ref)
}
/**
- * batadv_softif_vlan_put - decrease the vlan object refcounter and
+ * batadv_softif_vlan_put() - decrease the vlan object refcounter and
* possibly release it
* @vlan: the vlan object to release
*/
}
/**
- * batadv_softif_vlan_get - get the vlan object for a specific vid
+ * batadv_softif_vlan_get() - get the vlan object for a specific vid
* @bat_priv: the bat priv with all the soft interface information
* @vid: the identifier of the vlan object to retrieve
*
}
/**
- * batadv_softif_create_vlan - allocate the needed resources for a new vlan
+ * batadv_softif_create_vlan() - allocate the needed resources for a new vlan
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier
*
}
/**
- * batadv_softif_destroy_vlan - remove and destroy a softif_vlan object
+ * batadv_softif_destroy_vlan() - remove and destroy a softif_vlan object
* @bat_priv: the bat priv with all the soft interface information
* @vlan: the object to remove
*/
}
/**
- * batadv_interface_add_vid - ndo_add_vid API implementation
+ * batadv_interface_add_vid() - ndo_add_vid API implementation
* @dev: the netdev of the mesh interface
* @proto: protocol of the the vlan id
* @vid: identifier of the new vlan
}
/**
- * batadv_interface_kill_vid - ndo_kill_vid API implementation
+ * batadv_interface_kill_vid() - ndo_kill_vid API implementation
* @dev: the netdev of the mesh interface
* @proto: protocol of the the vlan id
* @vid: identifier of the deleted vlan
static struct lock_class_key batadv_netdev_addr_lock_key;
/**
- * batadv_set_lockdep_class_one - Set lockdep class for a single tx queue
+ * batadv_set_lockdep_class_one() - Set lockdep class for a single tx queue
* @dev: device which owns the tx queue
* @txq: tx queue to modify
* @_unused: always NULL
}
/**
- * batadv_set_lockdep_class - Set txq and addr_list lockdep class
+ * batadv_set_lockdep_class() - Set txq and addr_list lockdep class
* @dev: network device to modify
*/
static void batadv_set_lockdep_class(struct net_device *dev)
}
/**
- * batadv_softif_init_late - late stage initialization of soft interface
+ * batadv_softif_init_late() - late stage initialization of soft interface
* @dev: registered network device to modify
*
* Return: error code on failures
}
/**
- * batadv_softif_slave_add - Add a slave interface to a batadv_soft_interface
+ * batadv_softif_slave_add() - Add a slave interface to a batadv_soft_interface
* @dev: batadv_soft_interface used as master interface
* @slave_dev: net_device which should become the slave interface
* @extack: extended ACK report struct
}
/**
- * batadv_softif_slave_del - Delete a slave iface from a batadv_soft_interface
+ * batadv_softif_slave_del() - Delete a slave iface from a batadv_soft_interface
* @dev: batadv_soft_interface used as master interface
* @slave_dev: net_device which should be removed from the master interface
*
};
/**
- * batadv_softif_free - Deconstructor of batadv_soft_interface
+ * batadv_softif_free() - Deconstructor of batadv_soft_interface
* @dev: Device to cleanup and remove
*/
static void batadv_softif_free(struct net_device *dev)
}
/**
- * batadv_softif_init_early - early stage initialization of soft interface
+ * batadv_softif_init_early() - early stage initialization of soft interface
* @dev: registered network device to modify
*/
static void batadv_softif_init_early(struct net_device *dev)
}
/**
- * batadv_softif_destroy_sysfs - deletion of batadv_soft_interface via sysfs
+ * batadv_softif_destroy_sysfs() - deletion of batadv_soft_interface via sysfs
* @soft_iface: the to-be-removed batman-adv interface
*/
void batadv_softif_destroy_sysfs(struct net_device *soft_iface)
}
/**
- * batadv_softif_destroy_netlink - deletion of batadv_soft_interface via netlink
+ * batadv_softif_destroy_netlink() - deletion of batadv_soft_interface via
+ * netlink
* @soft_iface: the to-be-removed batman-adv interface
* @head: list pointer
*/
}
/**
- * batadv_vlan_kobj_to_batpriv - convert a vlan kobj in the associated batpriv
+ * batadv_vlan_kobj_to_batpriv() - convert a vlan kobj in the associated batpriv
* @obj: kobject to covert
*
* Return: the associated batadv_priv struct.
}
/**
- * batadv_kobj_to_vlan - convert a kobj in the associated softif_vlan struct
+ * batadv_kobj_to_vlan() - convert a kobj in the associated softif_vlan struct
* @bat_priv: the bat priv with all the soft interface information
* @obj: kobject to covert
*
}
/**
- * batadv_show_isolation_mark - print the current isolation mark/mask
+ * batadv_show_isolation_mark() - print the current isolation mark/mask
* @kobj: kobject representing the private mesh sysfs directory
* @attr: the batman-adv attribute the user is interacting with
* @buff: the buffer that will contain the data to send back to the user
}
/**
- * batadv_store_isolation_mark - parse and store the isolation mark/mask entered
- * by the user
+ * batadv_store_isolation_mark() - parse and store the isolation mark/mask
+ * entered by the user
* @kobj: kobject representing the private mesh sysfs directory
* @attr: the batman-adv attribute the user is interacting with
* @buff: the buffer containing the user data
}
/**
- * batadv_sysfs_add_vlan - add all the needed sysfs objects for the new vlan
+ * batadv_sysfs_add_vlan() - add all the needed sysfs objects for the new vlan
* @dev: netdev of the mesh interface
* @vlan: private data of the newly added VLAN interface
*
}
/**
- * batadv_sysfs_del_vlan - remove all the sysfs objects for a given VLAN
+ * batadv_sysfs_del_vlan() - remove all the sysfs objects for a given VLAN
* @bat_priv: the bat priv with all the soft interface information
* @vlan: the private data of the VLAN to destroy
*/
}
/**
- * batadv_store_mesh_iface_finish - store new hardif mesh_iface state
+ * batadv_store_mesh_iface_finish() - store new hardif mesh_iface state
* @net_dev: netdevice to add/remove to/from batman-adv soft-interface
* @ifname: name of soft-interface to modify
*
}
/**
- * batadv_store_mesh_iface_work - store new hardif mesh_iface state
+ * batadv_store_mesh_iface_work() - store new hardif mesh_iface state
* @work: work queue item
*
* Changes the parts of the hard+soft interface which can not be modified under
#ifdef CONFIG_BATMAN_ADV_BATMAN_V
/**
- * batadv_store_throughput_override - parse and store throughput override
+ * batadv_store_throughput_override() - parse and store throughput override
* entered by the user
* @kobj: kobject representing the private mesh sysfs directory
* @attr: the batman-adv attribute the user is interacting with
static u8 batadv_tp_prerandom[4096] __read_mostly;
/**
- * batadv_tp_session_cookie - generate session cookie based on session ids
+ * batadv_tp_session_cookie() - generate session cookie based on session ids
* @session: TP session identifier
* @icmp_uid: icmp pseudo uid of the tp session
*
}
/**
- * batadv_tp_cwnd - compute the new cwnd size
+ * batadv_tp_cwnd() - compute the new cwnd size
* @base: base cwnd size value
* @increment: the value to add to base to get the new size
* @min: minumim cwnd value (usually MSS)
}
/**
- * batadv_tp_updated_cwnd - update the Congestion Windows
+ * batadv_tp_updated_cwnd() - update the Congestion Windows
* @tp_vars: the private data of the current TP meter session
* @mss: maximum segment size of transmission
*
}
/**
- * batadv_tp_update_rto - calculate new retransmission timeout
+ * batadv_tp_update_rto() - calculate new retransmission timeout
* @tp_vars: the private data of the current TP meter session
* @new_rtt: new roundtrip time in msec
*/
}
/**
- * batadv_tp_batctl_notify - send client status result to client
+ * batadv_tp_batctl_notify() - send client status result to client
* @reason: reason for tp meter session stop
* @dst: destination of tp_meter session
* @bat_priv: the bat priv with all the soft interface information
}
/**
- * batadv_tp_batctl_error_notify - send client error result to client
+ * batadv_tp_batctl_error_notify() - send client error result to client
* @reason: reason for tp meter session stop
* @dst: destination of tp_meter session
* @bat_priv: the bat priv with all the soft interface information
}
/**
- * batadv_tp_list_find - find a tp_vars object in the global list
+ * batadv_tp_list_find() - find a tp_vars object in the global list
* @bat_priv: the bat priv with all the soft interface information
* @dst: the other endpoint MAC address to look for
*
}
/**
- * batadv_tp_list_find_session - find tp_vars session object in the global list
+ * batadv_tp_list_find_session() - find tp_vars session object in the global
+ * list
* @bat_priv: the bat priv with all the soft interface information
* @dst: the other endpoint MAC address to look for
* @session: session identifier
}
/**
- * batadv_tp_vars_release - release batadv_tp_vars from lists and queue for
+ * batadv_tp_vars_release() - release batadv_tp_vars from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the batadv_tp_vars
*/
}
/**
- * batadv_tp_vars_put - decrement the batadv_tp_vars refcounter and possibly
+ * batadv_tp_vars_put() - decrement the batadv_tp_vars refcounter and possibly
* release it
* @tp_vars: the private data of the current TP meter session to be free'd
*/
}
/**
- * batadv_tp_sender_cleanup - cleanup sender data and drop and timer
+ * batadv_tp_sender_cleanup() - cleanup sender data and drop and timer
* @bat_priv: the bat priv with all the soft interface information
* @tp_vars: the private data of the current TP meter session to cleanup
*/
}
/**
- * batadv_tp_sender_end - print info about ended session and inform client
+ * batadv_tp_sender_end() - print info about ended session and inform client
* @bat_priv: the bat priv with all the soft interface information
* @tp_vars: the private data of the current TP meter session
*/
}
/**
- * batadv_tp_sender_shutdown - let sender thread/timer stop gracefully
+ * batadv_tp_sender_shutdown() - let sender thread/timer stop gracefully
* @tp_vars: the private data of the current TP meter session
* @reason: reason for tp meter session stop
*/
}
/**
- * batadv_tp_sender_finish - stop sender session after test_length was reached
+ * batadv_tp_sender_finish() - stop sender session after test_length was reached
* @work: delayed work reference of the related tp_vars
*/
static void batadv_tp_sender_finish(struct work_struct *work)
}
/**
- * batadv_tp_reset_sender_timer - reschedule the sender timer
+ * batadv_tp_reset_sender_timer() - reschedule the sender timer
* @tp_vars: the private TP meter data for this session
*
* Reschedule the timer using tp_vars->rto as delay
}
/**
- * batadv_tp_sender_timeout - timer that fires in case of packet loss
+ * batadv_tp_sender_timeout() - timer that fires in case of packet loss
* @arg: address of the related tp_vars
*
* If fired it means that there was packet loss.
}
/**
- * batadv_tp_fill_prerandom - Fill buffer with prefetched random bytes
+ * batadv_tp_fill_prerandom() - Fill buffer with prefetched random bytes
* @tp_vars: the private TP meter data for this session
* @buf: Buffer to fill with bytes
* @nbytes: amount of pseudorandom bytes
}
/**
- * batadv_tp_send_msg - send a single message
+ * batadv_tp_send_msg() - send a single message
* @tp_vars: the private TP meter data for this session
* @src: source mac address
* @orig_node: the originator of the destination
}
/**
- * batadv_tp_recv_ack - ACK receiving function
+ * batadv_tp_recv_ack() - ACK receiving function
* @bat_priv: the bat priv with all the soft interface information
* @skb: the buffer containing the received packet
*
}
/**
- * batadv_tp_avail - check if congestion window is not full
+ * batadv_tp_avail() - check if congestion window is not full
* @tp_vars: the private data of the current TP meter session
* @payload_len: size of the payload of a single message
*
}
/**
- * batadv_tp_wait_available - wait until congestion window becomes free or
+ * batadv_tp_wait_available() - wait until congestion window becomes free or
* timeout is reached
* @tp_vars: the private data of the current TP meter session
* @plen: size of the payload of a single message
}
/**
- * batadv_tp_send - main sending thread of a tp meter session
+ * batadv_tp_send() - main sending thread of a tp meter session
* @arg: address of the related tp_vars
*
* Return: nothing, this function never returns
}
/**
- * batadv_tp_start_kthread - start new thread which manages the tp meter sender
+ * batadv_tp_start_kthread() - start new thread which manages the tp meter
+ * sender
* @tp_vars: the private data of the current TP meter session
*/
static void batadv_tp_start_kthread(struct batadv_tp_vars *tp_vars)
}
/**
- * batadv_tp_start - start a new tp meter session
+ * batadv_tp_start() - start a new tp meter session
* @bat_priv: the bat priv with all the soft interface information
* @dst: the receiver MAC address
* @test_length: test length in milliseconds
}
/**
- * batadv_tp_stop - stop currently running tp meter session
+ * batadv_tp_stop() - stop currently running tp meter session
* @bat_priv: the bat priv with all the soft interface information
* @dst: the receiver MAC address
* @return_value: reason for tp meter session stop
}
/**
- * batadv_tp_reset_receiver_timer - reset the receiver shutdown timer
+ * batadv_tp_reset_receiver_timer() - reset the receiver shutdown timer
* @tp_vars: the private data of the current TP meter session
*
* start the receiver shutdown timer or reset it if already started
}
/**
- * batadv_tp_receiver_shutdown - stop a tp meter receiver when timeout is
+ * batadv_tp_receiver_shutdown() - stop a tp meter receiver when timeout is
* reached without received ack
* @arg: address of the related tp_vars
*/
}
/**
- * batadv_tp_send_ack - send an ACK packet
+ * batadv_tp_send_ack() - send an ACK packet
* @bat_priv: the bat priv with all the soft interface information
* @dst: the mac address of the destination originator
* @seq: the sequence number to ACK
}
/**
- * batadv_tp_handle_out_of_order - store an out of order packet
+ * batadv_tp_handle_out_of_order() - store an out of order packet
* @tp_vars: the private data of the current TP meter session
* @skb: the buffer containing the received packet
*
}
/**
- * batadv_tp_ack_unordered - update number received bytes in current stream
+ * batadv_tp_ack_unordered() - update number received bytes in current stream
* without gaps
* @tp_vars: the private data of the current TP meter session
*/
}
/**
- * batadv_tp_init_recv - return matching or create new receiver tp_vars
+ * batadv_tp_init_recv() - return matching or create new receiver tp_vars
* @bat_priv: the bat priv with all the soft interface information
* @icmp: received icmp tp msg
*
}
/**
- * batadv_tp_recv_msg - process a single data message
+ * batadv_tp_recv_msg() - process a single data message
* @bat_priv: the bat priv with all the soft interface information
* @skb: the buffer containing the received packet
*
}
/**
- * batadv_tp_meter_recv - main TP Meter receiving function
+ * batadv_tp_meter_recv() - main TP Meter receiving function
* @bat_priv: the bat priv with all the soft interface information
* @skb: the buffer containing the received packet
*/
}
/**
- * batadv_tp_meter_init - initialize global tp_meter structures
+ * batadv_tp_meter_init() - initialize global tp_meter structures
*/
void __init batadv_tp_meter_init(void)
{
bool roaming);
/**
- * batadv_compare_tt - check if two TT entries are the same
+ * batadv_compare_tt() - check if two TT entries are the same
* @node: the list element pointer of the first TT entry
* @data2: pointer to the tt_common_entry of the second TT entry
*
}
/**
- * batadv_choose_tt - return the index of the tt entry in the hash table
+ * batadv_choose_tt() - return the index of the tt entry in the hash table
* @data: pointer to the tt_common_entry object to map
* @size: the size of the hash table
*
}
/**
- * batadv_tt_hash_find - look for a client in the given hash table
+ * batadv_tt_hash_find() - look for a client in the given hash table
* @hash: the hash table to search
* @addr: the mac address of the client to look for
* @vid: VLAN identifier
}
/**
- * batadv_tt_local_hash_find - search the local table for a given client
+ * batadv_tt_local_hash_find() - search the local table for a given client
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the client to look for
* @vid: VLAN identifier
}
/**
- * batadv_tt_global_hash_find - search the global table for a given client
+ * batadv_tt_global_hash_find() - search the global table for a given client
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the client to look for
* @vid: VLAN identifier
}
/**
- * batadv_tt_local_entry_free_rcu - free the tt_local_entry
+ * batadv_tt_local_entry_free_rcu() - free the tt_local_entry
* @rcu: rcu pointer of the tt_local_entry
*/
static void batadv_tt_local_entry_free_rcu(struct rcu_head *rcu)
}
/**
- * batadv_tt_local_entry_release - release tt_local_entry from lists and queue
+ * batadv_tt_local_entry_release() - release tt_local_entry from lists and queue
* for free after rcu grace period
* @ref: kref pointer of the nc_node
*/
}
/**
- * batadv_tt_local_entry_put - decrement the tt_local_entry refcounter and
+ * batadv_tt_local_entry_put() - decrement the tt_local_entry refcounter and
* possibly release it
* @tt_local_entry: tt_local_entry to be free'd
*/
}
/**
- * batadv_tt_global_entry_free_rcu - free the tt_global_entry
+ * batadv_tt_global_entry_free_rcu() - free the tt_global_entry
* @rcu: rcu pointer of the tt_global_entry
*/
static void batadv_tt_global_entry_free_rcu(struct rcu_head *rcu)
}
/**
- * batadv_tt_global_entry_release - release tt_global_entry from lists and queue
- * for free after rcu grace period
+ * batadv_tt_global_entry_release() - release tt_global_entry from lists and
+ * queue for free after rcu grace period
* @ref: kref pointer of the nc_node
*/
static void batadv_tt_global_entry_release(struct kref *ref)
}
/**
- * batadv_tt_global_entry_put - decrement the tt_global_entry refcounter and
+ * batadv_tt_global_entry_put() - decrement the tt_global_entry refcounter and
* possibly release it
* @tt_global_entry: tt_global_entry to be free'd
*/
}
/**
- * batadv_tt_global_hash_count - count the number of orig entries
+ * batadv_tt_global_hash_count() - count the number of orig entries
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the client to count entries for
* @vid: VLAN identifier
}
/**
- * batadv_tt_local_size_mod - change the size by v of the local table identified
- * by vid
+ * batadv_tt_local_size_mod() - change the size by v of the local table
+ * identified by vid
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier of the sub-table to change
* @v: the amount to sum to the local table size
}
/**
- * batadv_tt_local_size_inc - increase by one the local table size for the given
- * vid
+ * batadv_tt_local_size_inc() - increase by one the local table size for the
+ * given vid
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier
*/
}
/**
- * batadv_tt_local_size_dec - decrease by one the local table size for the given
- * vid
+ * batadv_tt_local_size_dec() - decrease by one the local table size for the
+ * given vid
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier
*/
}
/**
- * batadv_tt_global_size_mod - change the size by v of the global table
+ * batadv_tt_global_size_mod() - change the size by v of the global table
* for orig_node identified by vid
* @orig_node: the originator for which the table has to be modified
* @vid: the VLAN identifier
}
/**
- * batadv_tt_global_size_inc - increase by one the global table size for the
+ * batadv_tt_global_size_inc() - increase by one the global table size for the
* given vid
* @orig_node: the originator which global table size has to be decreased
* @vid: the vlan identifier
}
/**
- * batadv_tt_global_size_dec - decrease by one the global table size for the
+ * batadv_tt_global_size_dec() - decrease by one the global table size for the
* given vid
* @orig_node: the originator which global table size has to be decreased
* @vid: the vlan identifier
}
/**
- * batadv_tt_orig_list_entry_free_rcu - free the orig_entry
+ * batadv_tt_orig_list_entry_free_rcu() - free the orig_entry
* @rcu: rcu pointer of the orig_entry
*/
static void batadv_tt_orig_list_entry_free_rcu(struct rcu_head *rcu)
}
/**
- * batadv_tt_orig_list_entry_release - release tt orig entry from lists and
+ * batadv_tt_orig_list_entry_release() - release tt orig entry from lists and
* queue for free after rcu grace period
* @ref: kref pointer of the tt orig entry
*/
}
/**
- * batadv_tt_orig_list_entry_put - decrement the tt orig entry refcounter and
+ * batadv_tt_orig_list_entry_put() - decrement the tt orig entry refcounter and
* possibly release it
* @orig_entry: tt orig entry to be free'd
*/
}
/**
- * batadv_tt_local_event - store a local TT event (ADD/DEL)
+ * batadv_tt_local_event() - store a local TT event (ADD/DEL)
* @bat_priv: the bat priv with all the soft interface information
* @tt_local_entry: the TT entry involved in the event
* @event_flags: flags to store in the event structure
}
/**
- * batadv_tt_len - compute length in bytes of given number of tt changes
+ * batadv_tt_len() - compute length in bytes of given number of tt changes
* @changes_num: number of tt changes
*
* Return: computed length in bytes.
}
/**
- * batadv_tt_entries - compute the number of entries fitting in tt_len bytes
+ * batadv_tt_entries() - compute the number of entries fitting in tt_len bytes
* @tt_len: available space
*
* Return: the number of entries.
}
/**
- * batadv_tt_local_table_transmit_size - calculates the local translation table
- * size when transmitted over the air
+ * batadv_tt_local_table_transmit_size() - calculates the local translation
+ * table size when transmitted over the air
* @bat_priv: the bat priv with all the soft interface information
*
* Return: local translation table size in bytes.
}
/**
- * batadv_tt_local_add - add a new client to the local table or update an
+ * batadv_tt_local_add() - add a new client to the local table or update an
* existing client
* @soft_iface: netdev struct of the mesh interface
* @addr: the mac address of the client to add
}
/**
- * batadv_tt_prepare_tvlv_global_data - prepare the TVLV TT header to send
+ * batadv_tt_prepare_tvlv_global_data() - prepare the TVLV TT header to send
* within a TT Response directed to another node
* @orig_node: originator for which the TT data has to be prepared
* @tt_data: uninitialised pointer to the address of the TVLV buffer
}
/**
- * batadv_tt_prepare_tvlv_local_data - allocate and prepare the TT TVLV for this
- * node
+ * batadv_tt_prepare_tvlv_local_data() - allocate and prepare the TT TVLV for
+ * this node
* @bat_priv: the bat priv with all the soft interface information
* @tt_data: uninitialised pointer to the address of the TVLV buffer
* @tt_change: uninitialised pointer to the address of the area where the TT
}
/**
- * batadv_tt_tvlv_container_update - update the translation table tvlv container
- * after local tt changes have been committed
+ * batadv_tt_tvlv_container_update() - update the translation table tvlv
+ * container after local tt changes have been committed
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_tt_tvlv_container_update(struct batadv_priv *bat_priv)
#endif
/**
- * batadv_tt_local_dump_entry - Dump one TT local entry into a message
+ * batadv_tt_local_dump_entry() - Dump one TT local entry into a message
* @msg :Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_tt_local_dump_bucket - Dump one TT local bucket into a message
+ * batadv_tt_local_dump_bucket() - Dump one TT local bucket into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_tt_local_dump - Dump TT local entries into a message
+ * batadv_tt_local_dump() - Dump TT local entries into a message
* @msg: Netlink message to dump into
* @cb: Parameters from query
*
}
/**
- * batadv_tt_local_remove - logically remove an entry from the local table
+ * batadv_tt_local_remove() - logically remove an entry from the local table
* @bat_priv: the bat priv with all the soft interface information
* @addr: the MAC address of the client to remove
* @vid: VLAN identifier
}
/**
- * batadv_tt_local_purge_list - purge inactive tt local entries
+ * batadv_tt_local_purge_list() - purge inactive tt local entries
* @bat_priv: the bat priv with all the soft interface information
* @head: pointer to the list containing the local tt entries
* @timeout: parameter deciding whether a given tt local entry is considered
}
/**
- * batadv_tt_local_purge - purge inactive tt local entries
+ * batadv_tt_local_purge() - purge inactive tt local entries
* @bat_priv: the bat priv with all the soft interface information
* @timeout: parameter deciding whether a given tt local entry is considered
* inactive or not
}
/**
- * batadv_tt_global_orig_entry_find - find a TT orig_list_entry
+ * batadv_tt_global_orig_entry_find() - find a TT orig_list_entry
* @entry: the TT global entry where the orig_list_entry has to be
* extracted from
* @orig_node: the originator for which the orig_list_entry has to be found
}
/**
- * batadv_tt_global_entry_has_orig - check if a TT global entry is also handled
- * by a given originator
+ * batadv_tt_global_entry_has_orig() - check if a TT global entry is also
+ * handled by a given originator
* @entry: the TT global entry to check
* @orig_node: the originator to search in the list
*
}
/**
- * batadv_tt_global_sync_flags - update TT sync flags
+ * batadv_tt_global_sync_flags() - update TT sync flags
* @tt_global: the TT global entry to update sync flags in
*
* Updates the sync flag bits in the tt_global flag attribute with a logical
}
/**
- * batadv_tt_global_orig_entry_add - add or update a TT orig entry
+ * batadv_tt_global_orig_entry_add() - add or update a TT orig entry
* @tt_global: the TT global entry to add an orig entry in
* @orig_node: the originator to add an orig entry for
* @ttvn: translation table version number of this changeset
}
/**
- * batadv_tt_global_add - add a new TT global entry or update an existing one
+ * batadv_tt_global_add() - add a new TT global entry or update an existing one
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: the originator announcing the client
* @tt_addr: the mac address of the non-mesh client
}
/**
- * batadv_transtable_best_orig - Get best originator list entry from tt entry
+ * batadv_transtable_best_orig() - Get best originator list entry from tt entry
* @bat_priv: the bat priv with all the soft interface information
* @tt_global_entry: global translation table entry to be analyzed
*
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
- * batadv_tt_global_print_entry - print all orig nodes who announce the address
- * for this global entry
+ * batadv_tt_global_print_entry() - print all orig nodes who announce the
+ * address for this global entry
* @bat_priv: the bat priv with all the soft interface information
* @tt_global_entry: global translation table entry to be printed
* @seq: debugfs table seq_file struct
#endif
/**
- * batadv_tt_global_dump_subentry - Dump all TT local entries into a message
+ * batadv_tt_global_dump_subentry() - Dump all TT local entries into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_tt_global_dump_entry - Dump one TT global entry into a message
+ * batadv_tt_global_dump_entry() - Dump one TT global entry into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_tt_global_dump_bucket - Dump one TT local bucket into a message
+ * batadv_tt_global_dump_bucket() - Dump one TT local bucket into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
}
/**
- * batadv_tt_global_dump - Dump TT global entries into a message
+ * batadv_tt_global_dump() - Dump TT global entries into a message
* @msg: Netlink message to dump into
* @cb: Parameters from query
*
}
/**
- * _batadv_tt_global_del_orig_entry - remove and free an orig_entry
+ * _batadv_tt_global_del_orig_entry() - remove and free an orig_entry
* @tt_global_entry: the global entry to remove the orig_entry from
* @orig_entry: the orig entry to remove and free
*
}
/**
- * batadv_tt_global_del_orig_node - remove orig_node from a global tt entry
+ * batadv_tt_global_del_orig_node() - remove orig_node from a global tt entry
* @bat_priv: the bat priv with all the soft interface information
* @tt_global_entry: the global entry to remove the orig_node from
* @orig_node: the originator announcing the client
}
/**
- * batadv_tt_global_del - remove a client from the global table
+ * batadv_tt_global_del() - remove a client from the global table
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: an originator serving this client
* @addr: the mac address of the client
}
/**
- * batadv_tt_global_del_orig - remove all the TT global entries belonging to the
- * given originator matching the provided vid
+ * batadv_tt_global_del_orig() - remove all the TT global entries belonging to
+ * the given originator matching the provided vid
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: the originator owning the entries to remove
* @match_vid: the VLAN identifier to match. If negative all the entries will be
}
/**
- * batadv_transtable_search - get the mesh destination for a given client
+ * batadv_transtable_search() - get the mesh destination for a given client
* @bat_priv: the bat priv with all the soft interface information
* @src: mac address of the source client
* @addr: mac address of the destination client
}
/**
- * batadv_tt_global_crc - calculates the checksum of the local table belonging
+ * batadv_tt_global_crc() - calculates the checksum of the local table belonging
* to the given orig_node
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: originator for which the CRC should be computed
}
/**
- * batadv_tt_local_crc - calculates the checksum of the local table
+ * batadv_tt_local_crc() - calculates the checksum of the local table
* @bat_priv: the bat priv with all the soft interface information
* @vid: VLAN identifier for which the CRC32 has to be computed
*
}
/**
- * batadv_tt_req_node_release - free tt_req node entry
+ * batadv_tt_req_node_release() - free tt_req node entry
* @ref: kref pointer of the tt req_node entry
*/
static void batadv_tt_req_node_release(struct kref *ref)
}
/**
- * batadv_tt_req_node_put - decrement the tt_req_node refcounter and
+ * batadv_tt_req_node_put() - decrement the tt_req_node refcounter and
* possibly release it
* @tt_req_node: tt_req_node to be free'd
*/
}
/**
- * batadv_tt_req_node_new - search and possibly create a tt_req_node object
+ * batadv_tt_req_node_new() - search and possibly create a tt_req_node object
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: orig node this request is being issued for
*
}
/**
- * batadv_tt_local_valid - verify that given tt entry is a valid one
+ * batadv_tt_local_valid() - verify that given tt entry is a valid one
* @entry_ptr: to be checked local tt entry
* @data_ptr: not used but definition required to satisfy the callback prototype
*
}
/**
- * batadv_tt_tvlv_generate - fill the tvlv buff with the tt entries from the
+ * batadv_tt_tvlv_generate() - fill the tvlv buff with the tt entries from the
* specified tt hash
* @bat_priv: the bat priv with all the soft interface information
* @hash: hash table containing the tt entries
}
/**
- * batadv_tt_global_check_crc - check if all the CRCs are correct
+ * batadv_tt_global_check_crc() - check if all the CRCs are correct
* @orig_node: originator for which the CRCs have to be checked
* @tt_vlan: pointer to the first tvlv VLAN entry
* @num_vlan: number of tvlv VLAN entries
}
/**
- * batadv_tt_local_update_crc - update all the local CRCs
+ * batadv_tt_local_update_crc() - update all the local CRCs
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_tt_local_update_crc(struct batadv_priv *bat_priv)
}
/**
- * batadv_tt_global_update_crc - update all the global CRCs for this orig_node
+ * batadv_tt_global_update_crc() - update all the global CRCs for this orig_node
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: the orig_node for which the CRCs have to be updated
*/
}
/**
- * batadv_send_tt_request - send a TT Request message to a given node
+ * batadv_send_tt_request() - send a TT Request message to a given node
* @bat_priv: the bat priv with all the soft interface information
* @dst_orig_node: the destination of the message
* @ttvn: the version number that the source of the message is looking for
}
/**
- * batadv_send_other_tt_response - send reply to tt request concerning another
+ * batadv_send_other_tt_response() - send reply to tt request concerning another
* node's translation table
* @bat_priv: the bat priv with all the soft interface information
* @tt_data: tt data containing the tt request information
}
/**
- * batadv_send_my_tt_response - send reply to tt request concerning this node's
- * translation table
+ * batadv_send_my_tt_response() - send reply to tt request concerning this
+ * node's translation table
* @bat_priv: the bat priv with all the soft interface information
* @tt_data: tt data containing the tt request information
* @req_src: mac address of tt request sender
}
/**
- * batadv_send_tt_response - send reply to tt request
+ * batadv_send_tt_response() - send reply to tt request
* @bat_priv: the bat priv with all the soft interface information
* @tt_data: tt data containing the tt request information
* @req_src: mac address of tt request sender
}
/**
- * batadv_is_my_client - check if a client is served by the local node
+ * batadv_is_my_client() - check if a client is served by the local node
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the client to check
* @vid: VLAN identifier
}
/**
- * batadv_handle_tt_response - process incoming tt reply
+ * batadv_handle_tt_response() - process incoming tt reply
* @bat_priv: the bat priv with all the soft interface information
* @tt_data: tt data containing the tt request information
* @resp_src: mac address of tt reply sender
}
/**
- * batadv_tt_check_roam_count - check if a client has roamed too frequently
+ * batadv_tt_check_roam_count() - check if a client has roamed too frequently
* @bat_priv: the bat priv with all the soft interface information
* @client: mac address of the roaming client
*
}
/**
- * batadv_send_roam_adv - send a roaming advertisement message
+ * batadv_send_roam_adv() - send a roaming advertisement message
* @bat_priv: the bat priv with all the soft interface information
* @client: mac address of the roaming client
* @vid: VLAN identifier
}
/**
- * batadv_tt_local_set_flags - set or unset the specified flags on the local
+ * batadv_tt_local_set_flags() - set or unset the specified flags on the local
* table and possibly count them in the TT size
* @bat_priv: the bat priv with all the soft interface information
* @flags: the flag to switch
}
/**
- * batadv_tt_local_commit_changes_nolock - commit all pending local tt changes
+ * batadv_tt_local_commit_changes_nolock() - commit all pending local tt changes
* which have been queued in the time since the last commit
* @bat_priv: the bat priv with all the soft interface information
*
}
/**
- * batadv_tt_local_commit_changes - commit all pending local tt changes which
+ * batadv_tt_local_commit_changes() - commit all pending local tt changes which
* have been queued in the time since the last commit
* @bat_priv: the bat priv with all the soft interface information
*/
}
/**
- * batadv_tt_update_orig - update global translation table with new tt
+ * batadv_tt_update_orig() - update global translation table with new tt
* information received via ogms
* @bat_priv: the bat priv with all the soft interface information
* @orig_node: the orig_node of the ogm
}
/**
- * batadv_tt_global_client_is_roaming - check if a client is marked as roaming
+ * batadv_tt_global_client_is_roaming() - check if a client is marked as roaming
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the client to check
* @vid: VLAN identifier
}
/**
- * batadv_tt_local_client_is_roaming - tells whether the client is roaming
+ * batadv_tt_local_client_is_roaming() - tells whether the client is roaming
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the local client to query
* @vid: VLAN identifier
}
/**
- * batadv_tt_local_resize_to_mtu - resize the local translation table fit the
+ * batadv_tt_local_resize_to_mtu() - resize the local translation table fit the
* maximum packet size that can be transported through the mesh
* @soft_iface: netdev struct of the mesh interface
*
}
/**
- * batadv_tt_tvlv_ogm_handler_v1 - process incoming tt tvlv container
+ * batadv_tt_tvlv_ogm_handler_v1() - process incoming tt tvlv container
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node of the ogm
* @flags: flags indicating the tvlv state (see batadv_tvlv_handler_flags)
}
/**
- * batadv_tt_tvlv_unicast_handler_v1 - process incoming (unicast) tt tvlv
+ * batadv_tt_tvlv_unicast_handler_v1() - process incoming (unicast) tt tvlv
* container
* @bat_priv: the bat priv with all the soft interface information
* @src: mac address of tt tvlv sender
}
/**
- * batadv_roam_tvlv_unicast_handler_v1 - process incoming tt roam tvlv container
+ * batadv_roam_tvlv_unicast_handler_v1() - process incoming tt roam tvlv
+ * container
* @bat_priv: the bat priv with all the soft interface information
* @src: mac address of tt tvlv sender
* @dst: mac address of tt tvlv recipient
}
/**
- * batadv_tt_init - initialise the translation table internals
+ * batadv_tt_init() - initialise the translation table internals
* @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 on success or negative error number in case of failure.
}
/**
- * batadv_tt_global_is_isolated - check if a client is marked as isolated
+ * batadv_tt_global_is_isolated() - check if a client is marked as isolated
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the client
* @vid: the identifier of the VLAN where this client is connected
}
/**
- * batadv_tt_cache_init - Initialize tt memory object cache
+ * batadv_tt_cache_init() - Initialize tt memory object cache
*
* Return: 0 on success or negative error number in case of failure.
*/
}
/**
- * batadv_tt_cache_destroy - Destroy tt memory object cache
+ * batadv_tt_cache_destroy() - Destroy tt memory object cache
*/
void batadv_tt_cache_destroy(void)
{
#include "tvlv.h"
/**
- * batadv_tvlv_handler_release - release tvlv handler from lists and queue for
+ * batadv_tvlv_handler_release() - release tvlv handler from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the tvlv
*/
}
/**
- * batadv_tvlv_handler_put - decrement the tvlv container refcounter and
+ * batadv_tvlv_handler_put() - decrement the tvlv container refcounter and
* possibly release it
* @tvlv_handler: the tvlv handler to free
*/
}
/**
- * batadv_tvlv_handler_get - retrieve tvlv handler from the tvlv handler list
+ * batadv_tvlv_handler_get() - retrieve tvlv handler from the tvlv handler list
* based on the provided type and version (both need to match)
* @bat_priv: the bat priv with all the soft interface information
* @type: tvlv handler type to look for
}
/**
- * batadv_tvlv_container_release - release tvlv from lists and free
+ * batadv_tvlv_container_release() - release tvlv from lists and free
* @ref: kref pointer of the tvlv
*/
static void batadv_tvlv_container_release(struct kref *ref)
}
/**
- * batadv_tvlv_container_put - decrement the tvlv container refcounter and
+ * batadv_tvlv_container_put() - decrement the tvlv container refcounter and
* possibly release it
* @tvlv: the tvlv container to free
*/
}
/**
- * batadv_tvlv_container_get - retrieve tvlv container from the tvlv container
+ * batadv_tvlv_container_get() - retrieve tvlv container from the tvlv container
* list based on the provided type and version (both need to match)
* @bat_priv: the bat priv with all the soft interface information
* @type: tvlv container type to look for
}
/**
- * batadv_tvlv_container_list_size - calculate the size of the tvlv container
+ * batadv_tvlv_container_list_size() - calculate the size of the tvlv container
* list entries
* @bat_priv: the bat priv with all the soft interface information
*
}
/**
- * batadv_tvlv_container_remove - remove tvlv container from the tvlv container
- * list
+ * batadv_tvlv_container_remove() - remove tvlv container from the tvlv
+ * container list
* @bat_priv: the bat priv with all the soft interface information
* @tvlv: the to be removed tvlv container
*
}
/**
- * batadv_tvlv_container_unregister - unregister tvlv container based on the
+ * batadv_tvlv_container_unregister() - unregister tvlv container based on the
* provided type and version (both need to match)
* @bat_priv: the bat priv with all the soft interface information
* @type: tvlv container type to unregister
}
/**
- * batadv_tvlv_container_register - register tvlv type, version and content
+ * batadv_tvlv_container_register() - register tvlv type, version and content
* to be propagated with each (primary interface) OGM
* @bat_priv: the bat priv with all the soft interface information
* @type: tvlv container type
}
/**
- * batadv_tvlv_realloc_packet_buff - reallocate packet buffer to accommodate
+ * batadv_tvlv_realloc_packet_buff() - reallocate packet buffer to accommodate
* requested packet size
* @packet_buff: packet buffer
* @packet_buff_len: packet buffer size
}
/**
- * batadv_tvlv_container_ogm_append - append tvlv container content to given
+ * batadv_tvlv_container_ogm_append() - append tvlv container content to given
* OGM packet buffer
* @bat_priv: the bat priv with all the soft interface information
* @packet_buff: ogm packet buffer
}
/**
- * batadv_tvlv_call_handler - parse the given tvlv buffer to call the
+ * batadv_tvlv_call_handler() - parse the given tvlv buffer to call the
* appropriate handlers
* @bat_priv: the bat priv with all the soft interface information
* @tvlv_handler: tvlv callback function handling the tvlv content
}
/**
- * batadv_tvlv_containers_process - parse the given tvlv buffer to call the
+ * batadv_tvlv_containers_process() - parse the given tvlv buffer to call the
* appropriate handlers
* @bat_priv: the bat priv with all the soft interface information
* @ogm_source: flag indicating whether the tvlv is an ogm or a unicast packet
}
/**
- * batadv_tvlv_ogm_receive - process an incoming ogm and call the appropriate
+ * batadv_tvlv_ogm_receive() - process an incoming ogm and call the appropriate
* handlers
* @bat_priv: the bat priv with all the soft interface information
* @batadv_ogm_packet: ogm packet containing the tvlv containers
}
/**
- * batadv_tvlv_handler_register - register tvlv handler based on the provided
+ * batadv_tvlv_handler_register() - register tvlv handler based on the provided
* type and version (both need to match) for ogm tvlv payload and/or unicast
* payload
* @bat_priv: the bat priv with all the soft interface information
}
/**
- * batadv_tvlv_handler_unregister - unregister tvlv handler based on the
+ * batadv_tvlv_handler_unregister() - unregister tvlv handler based on the
* provided type and version (both need to match)
* @bat_priv: the bat priv with all the soft interface information
* @type: tvlv handler type to be unregistered
}
/**
- * batadv_tvlv_unicast_send - send a unicast packet with tvlv payload to the
+ * batadv_tvlv_unicast_send() - send a unicast packet with tvlv payload to the
* specified host
* @bat_priv: the bat priv with all the soft interface information
* @src: source mac address of the unicast packet
projects / openwrt / staging / blogic.git / commitdiff