PHY_STATE_STR(READY)
PHY_STATE_STR(PENDING)
PHY_STATE_STR(UP)
- PHY_STATE_STR(AN)
PHY_STATE_STR(RUNNING)
PHY_STATE_STR(NOLINK)
PHY_STATE_STR(FORCING)
case PHY_UP:
needs_aneg = true;
- phydev->link_timeout = PHY_AN_TIMEOUT;
-
- break;
- case PHY_AN:
- err = phy_read_status(phydev);
- if (err < 0)
- break;
-
- /* If the link is down, give up on negotiation for now */
- if (!phydev->link) {
- phydev->state = PHY_NOLINK;
- phy_link_down(phydev, true);
- break;
- }
-
- /* Check if negotiation is done. Break if there's an error */
- err = phy_aneg_done(phydev);
- if (err < 0)
- break;
-
- /* If AN is done, we're running */
- if (err > 0) {
- phydev->state = PHY_RUNNING;
- phy_link_up(phydev);
- } else if (0 == phydev->link_timeout--)
- needs_aneg = true;
break;
case PHY_NOLINK:
if (!phy_polling_mode(phydev))
#define PHY_INIT_TIMEOUT 100000
#define PHY_STATE_TIME 1
#define PHY_FORCE_TIMEOUT 10
-#define PHY_AN_TIMEOUT 10
#define PHY_MAX_ADDR 32
*
* UP: The PHY and attached device are ready to do work.
* Interrupts should be started here.
- * - timer moves to AN
- *
- * AN: The PHY is currently negotiating the link state. Link is
- * therefore down for now. phy_timer will set this state when it
- * detects the state is UP. config_aneg will set this state
- * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
- * - If autonegotiation finishes, but there's no link, it sets
- * the state to NOLINK.
- * - If aneg finishes with link, it sets the state to RUNNING,
- * and calls adjust_link
- * - If autonegotiation did not finish after an arbitrary amount
- * of time, autonegotiation should be tried again if the PHY
- * supports "magic" autonegotiation (back to AN)
- * - If it didn't finish, and no magic_aneg, move to FORCING.
+ * - timer moves to NOLINK or RUNNING
*
* NOLINK: PHY is up, but not currently plugged in.
* - If the timer notes that the link comes back, we move to RUNNING
- * - config_aneg moves to AN
* - phy_stop moves to HALTED
*
* FORCING: PHY is being configured with forced settings
* link state is polled every other cycle of this state machine,
* which makes it every other second)
* - irq will set CHANGELINK
- * - config_aneg will set AN
* - phy_stop moves to HALTED
*
* CHANGELINK: PHY experienced a change in link state
PHY_READY,
PHY_PENDING,
PHY_UP,
- PHY_AN,
PHY_RUNNING,
PHY_NOLINK,
PHY_FORCING,