.. kernel-doc:: drivers/net/phy/mdio_bus.c
:internal:
+
+PHYLINK
+-------
+
+ PHYLINK interfaces traditional network drivers with PHYLIB, fixed-links,
+ and SFF modules (eg, hot-pluggable SFP) that may contain PHYs. PHYLINK
+ provides management of the link state and link modes.
+
+.. kernel-doc:: include/linux/phylink.h
+ :internal:
+
+.. kernel-doc:: drivers/net/phy/phylink.c
PHYLINK_DISABLE_LINK,
};
+/**
+ * struct phylink - internal data type for phylink
+ */
struct phylink {
+ /* private: */
struct net_device *netdev;
const struct phylink_mac_ops *ops;
return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS);
}
+/**
+ * phylink_set_port_modes() - set the port type modes in the ethtool mask
+ * @mask: ethtool link mode mask
+ *
+ * Sets all the port type modes in the ethtool mask. MAC drivers should
+ * use this in their 'validate' callback.
+ */
void phylink_set_port_modes(unsigned long *mask)
{
phylink_set(mask, TP);
return 0;
}
+/**
+ * phylink_create() - create a phylink instance
+ * @ndev: a pointer to the &struct net_device
+ * @np: a pointer to a &struct device_node describing the network interface
+ * @iface: the desired link mode defined by &typedef phy_interface_t
+ * @ops: a pointer to a &struct phylink_mac_ops for the MAC.
+ *
+ * Create a new phylink instance, and parse the link parameters found in @np.
+ * This will parse in-band modes, fixed-link or SFP configuration.
+ *
+ * Returns a pointer to a &struct phylink, or an error-pointer value. Users
+ * must use IS_ERR() to check for errors from this function.
+ */
struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
phy_interface_t iface,
const struct phylink_mac_ops *ops)
}
EXPORT_SYMBOL_GPL(phylink_create);
+/**
+ * phylink_destroy() - cleanup and destroy the phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Destroy a phylink instance. Any PHY that has been attached must have been
+ * cleaned up via phylink_disconnect_phy() prior to calling this function.
+ */
void phylink_destroy(struct phylink *pl)
{
if (pl->sfp_bus)
return 0;
}
+/**
+ * phylink_connect_phy() - connect a PHY to the phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @phy: a pointer to a &struct phy_device.
+ *
+ * Connect @phy to the phylink instance specified by @pl by calling
+ * phy_attach_direct(). Configure the @phy according to the MAC driver's
+ * capabilities, start the PHYLIB state machine and enable any interrupts
+ * that the PHY supports.
+ *
+ * This updates the phylink's ethtool supported and advertising link mode
+ * masks.
+ *
+ * Returns 0 on success or a negative errno.
+ */
int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
{
int ret;
}
EXPORT_SYMBOL_GPL(phylink_connect_phy);
+/**
+ * phylink_of_phy_connect() - connect the PHY specified in the DT mode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @dn: a pointer to a &struct device_node.
+ *
+ * Connect the phy specified in the device node @dn to the phylink instance
+ * specified by @pl. Actions specified in phylink_connect_phy() will be
+ * performed.
+ *
+ * Returns 0 on success or a negative errno.
+ */
int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn)
{
struct device_node *phy_node;
}
EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
+/**
+ * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
+ * instance.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Disconnect any current PHY from the phylink instance described by @pl.
+ */
void phylink_disconnect_phy(struct phylink *pl)
{
struct phy_device *phy;
}
EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
+/**
+ * phylink_mac_change() - notify phylink of a change in MAC state
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @up: indicates whether the link is currently up.
+ *
+ * The MAC driver should call this driver when the state of its link
+ * changes (eg, link failure, new negotiation results, etc.)
+ */
void phylink_mac_change(struct phylink *pl, bool up)
{
if (!up)
}
EXPORT_SYMBOL_GPL(phylink_mac_change);
+/**
+ * phylink_start() - start a phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Start the phylink instance specified by @pl, configuring the MAC for the
+ * desired link mode(s) and negotiation style. This should be called from the
+ * network device driver's &struct net_device_ops ndo_open() method.
+ */
void phylink_start(struct phylink *pl)
{
WARN_ON(!lockdep_rtnl_is_held());
}
EXPORT_SYMBOL_GPL(phylink_start);
+/**
+ * phylink_stop() - stop a phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Stop the phylink instance specified by @pl. This should be called from the
+ * network device driver's &struct net_device_ops ndo_stop() method. The
+ * network device's carrier state should not be changed prior to calling this
+ * function.
+ */
void phylink_stop(struct phylink *pl)
{
WARN_ON(!lockdep_rtnl_is_held());
}
EXPORT_SYMBOL_GPL(phylink_stop);
+/**
+ * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters
+ *
+ * Read the wake on lan parameters from the PHY attached to the phylink
+ * instance specified by @pl. If no PHY is currently attached, report no
+ * support for wake on lan.
+ */
void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
{
WARN_ON(!lockdep_rtnl_is_held());
}
EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
+/**
+ * phylink_ethtool_set_wol() - set wake on lan parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @wol: a pointer to &struct ethtool_wolinfo for the desired parameters
+ *
+ * Set the wake on lan parameters for the PHY attached to the phylink
+ * instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP
+ * error.
+ *
+ * Returns zero on success or negative errno code.
+ */
int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
{
int ret = -EOPNOTSUPP;
AUTONEG_DISABLE;
}
+/**
+ * phylink_ethtool_ksettings_get() - get the current link settings
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings
+ *
+ * Read the current link settings for the phylink instance specified by @pl.
+ * This will be the link settings read from the MAC, PHY or fixed link
+ * settings depending on the current negotiation mode.
+ */
int phylink_ethtool_ksettings_get(struct phylink *pl,
struct ethtool_link_ksettings *kset)
{
}
EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
+/**
+ * phylink_ethtool_ksettings_set() - set the link settings
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes
+ */
int phylink_ethtool_ksettings_set(struct phylink *pl,
const struct ethtool_link_ksettings *kset)
{
}
EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
+/**
+ * phylink_ethtool_nway_reset() - restart negotiation
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Restart negotiation for the phylink instance specified by @pl. This will
+ * cause any attached phy to restart negotiation with the link partner, and
+ * if the MAC is in a BaseX mode, the MAC will also be requested to restart
+ * negotiation.
+ *
+ * Returns zero on success, or negative error code.
+ */
int phylink_ethtool_nway_reset(struct phylink *pl)
{
int ret = 0;
}
EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset);
+/**
+ * phylink_ethtool_get_pauseparam() - get the current pause parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @pause: a pointer to a &struct ethtool_pauseparam
+ */
void phylink_ethtool_get_pauseparam(struct phylink *pl,
struct ethtool_pauseparam *pause)
{
}
EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam);
+/**
+ * phylink_ethtool_set_pauseparam() - set the current pause parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @pause: a pointer to a &struct ethtool_pauseparam
+ */
int phylink_ethtool_set_pauseparam(struct phylink *pl,
struct ethtool_pauseparam *pause)
{
}
EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_eeprom);
+/**
+ * phylink_ethtool_get_eee_err() - read the energy efficient ethernet error
+ * counter
+ * @pl: a pointer to a &struct phylink returned from phylink_create().
+ *
+ * Read the Energy Efficient Ethernet error counter from the PHY associated
+ * with the phylink instance specified by @pl.
+ *
+ * Returns positive error counter value, or negative error code.
+ */
int phylink_get_eee_err(struct phylink *pl)
{
int ret = 0;
}
EXPORT_SYMBOL_GPL(phylink_get_eee_err);
+/**
+ * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @eee: a pointer to a &struct ethtool_eee for the read parameters
+ */
int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
{
int ret = -EOPNOTSUPP;
}
EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
+/**
+ * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @eee: a pointer to a &struct ethtool_eee for the desired parameters
+ */
int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
{
int ret = -EOPNOTSUPP;
return 0;
}
+/**
+ * phylink_mii_ioctl() - generic mii ioctl interface
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @ifr: a pointer to a &struct ifreq for socket ioctls
+ * @cmd: ioctl cmd to execute
+ *
+ * Perform the specified MII ioctl on the PHY attached to the phylink instance
+ * specified by @pl. If no PHY is attached, emulate the presence of the PHY.
+ *
+ * Returns: zero on success or negative error code.
+ *
+ * %SIOCGMIIPHY:
+ * read register from the current PHY.
+ * %SIOCGMIIREG:
+ * read register from the specified PHY.
+ * %SIOCSMIIREG:
+ * set a register on the specified PHY.
+ */
int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *mii = if_mii(ifr);
return mode == MLO_AN_INBAND;
}
+/**
+ * struct phylink_link_state - link state structure
+ * @advertising: ethtool bitmask containing advertised link modes
+ * @lp_advertising: ethtool bitmask containing link partner advertised link
+ * modes
+ * @interface: link &typedef phy_interface_t mode
+ * @speed: link speed, one of the SPEED_* constants.
+ * @duplex: link duplex mode, one of DUPLEX_* constants.
+ * @pause: link pause state, described by MLO_PAUSE_* constants.
+ * @link: true if the link is up.
+ * @an_enabled: true if autonegotiation is enabled/desired.
+ * @an_complete: true if autonegotiation has completed.
+ */
struct phylink_link_state {
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
- phy_interface_t interface; /* PHY_INTERFACE_xxx */
+ phy_interface_t interface;
int speed;
int duplex;
int pause;
unsigned int an_complete:1;
};
+/**
+ * struct phylink_mac_ops - MAC operations structure.
+ * @validate: Validate and update the link configuration.
+ * @mac_link_state: Read the current link state from the hardware.
+ * @mac_config: configure the MAC for the selected mode and state.
+ * @mac_an_restart: restart 802.3z BaseX autonegotiation.
+ * @mac_link_down: take the link down.
+ * @mac_link_up: allow the link to come up.
+ *
+ * The individual methods are described more fully below.
+ */
struct phylink_mac_ops {
- /**
- * validate: validate and update the link configuration
- * @ndev: net_device structure associated with MAC
- * @config: configuration to validate
- *
- * Update the %config->supported and %config->advertised masks
- * clearing bits that can not be supported.
- *
- * Note: the PHY may be able to transform from one connection
- * technology to another, so, eg, don't clear 1000BaseX just
- * because the MAC is unable to support it. This is more about
- * clearing unsupported speeds and duplex settings.
- *
- * If the %config->interface mode is %PHY_INTERFACE_MODE_1000BASEX
- * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode
- * based on %config->advertised and/or %config->speed.
- */
void (*validate)(struct net_device *ndev, unsigned long *supported,
struct phylink_link_state *state);
-
- /* Read the current link state from the hardware */
- int (*mac_link_state)(struct net_device *, struct phylink_link_state *);
-
- /* Configure the MAC */
- /**
- * mac_config: configure the MAC for the selected mode and state
- * @ndev: net_device structure for the MAC
- * @mode: one of MLO_AN_FIXED, MLO_AN_PHY, MLO_AN_INBAND
- * @state: state structure
- *
- * The action performed depends on the currently selected mode:
- *
- * %MLO_AN_FIXED, %MLO_AN_PHY:
- * set the specified speed, duplex, pause mode, and phy interface
- * mode in the provided @state.
- * %MLO_AN_INBAND:
- * place the link in an inband negotiation mode (such as
- * 1000base-X or Cisco SGMII mode depending on the phy interface
- * mode), advertising the parameters given in advertising in @state.
- */
+ int (*mac_link_state)(struct net_device *ndev,
+ struct phylink_link_state *state);
void (*mac_config)(struct net_device *ndev, unsigned int mode,
const struct phylink_link_state *state);
-
- /**
- * mac_an_restart: restart 802.3z BaseX autonegotiation
- * @ndev: net_device structure for the MAC
- */
void (*mac_an_restart)(struct net_device *ndev);
-
- void (*mac_link_down)(struct net_device *, unsigned int mode);
- void (*mac_link_up)(struct net_device *, unsigned int mode,
- struct phy_device *);
+ void (*mac_link_down)(struct net_device *ndev, unsigned int mode);
+ void (*mac_link_up)(struct net_device *ndev, unsigned int mode,
+ struct phy_device *phy);
};
+#if 0 /* For kernel-doc purposes only. */
+/**
+ * validate - Validate and update the link configuration
+ * @ndev: a pointer to a &struct net_device for the MAC.
+ * @supported: ethtool bitmask for supported link modes.
+ * @state: a pointer to a &struct phylink_link_state.
+ *
+ * Clear bits in the @supported and @state->advertising masks that
+ * are not supportable by the MAC.
+ *
+ * Note that the PHY may be able to transform from one connection
+ * technology to another, so, eg, don't clear 1000BaseX just
+ * because the MAC is unable to BaseX mode. This is more about
+ * clearing unsupported speeds and duplex settings.
+ *
+ * If the @state->interface mode is %PHY_INTERFACE_MODE_1000BASEX
+ * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode
+ * based on @state->advertising and/or @state->speed and update
+ * @state->interface accordingly.
+ */
+void validate(struct net_device *ndev, unsigned long *supported,
+ struct phylink_link_state *state);
+
+/**
+ * mac_link_state() - Read the current link state from the hardware
+ * @ndev: a pointer to a &struct net_device for the MAC.
+ * @state: a pointer to a &struct phylink_link_state.
+ *
+ * Read the current link state from the MAC, reporting the current
+ * speed in @state->speed, duplex mode in @state->duplex, pause mode
+ * in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits,
+ * negotiation completion state in @state->an_complete, and link
+ * up state in @state->link.
+ */
+int mac_link_state(struct net_device *ndev,
+ struct phylink_link_state *state);
+
+/**
+ * mac_config() - configure the MAC for the selected mode and state
+ * @ndev: a pointer to a &struct net_device for the MAC.
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @state: a pointer to a &struct phylink_link_state.
+ *
+ * The action performed depends on the currently selected mode:
+ *
+ * %MLO_AN_FIXED, %MLO_AN_PHY:
+ * Configure the specified @state->speed, @state->duplex and
+ * @state->pause (%MLO_PAUSE_TX / %MLO_PAUSE_RX) mode.
+ *
+ * %MLO_AN_INBAND:
+ * place the link in an inband negotiation mode (such as 802.3z
+ * 1000base-X or Cisco SGMII mode depending on the @state->interface
+ * mode). In both cases, link state management (whether the link
+ * is up or not) is performed by the MAC, and reported via the
+ * mac_link_state() callback. Changes in link state must be made
+ * by calling phylink_mac_change().
+ *
+ * If in 802.3z mode, the link speed is fixed, dependent on the
+ * @state->interface. Duplex is negotiated, and pause is advertised
+ * according to @state->an_enabled, @state->pause and
+ * @state->advertising flags. Beware of MACs which only support full
+ * duplex at gigabit and higher speeds.
+ *
+ * If in Cisco SGMII mode, the link speed and duplex mode are passed
+ * in the serial bitstream 16-bit configuration word, and the MAC
+ * should be configured to read these bits and acknowledge the
+ * configuration word. Nothing is advertised by the MAC. The MAC is
+ * responsible for reading the configuration word and configuring
+ * itself accordingly.
+ */
+void mac_config(struct net_device *ndev, unsigned int mode,
+ const struct phylink_link_state *state);
+
+/**
+ * mac_an_restart() - restart 802.3z BaseX autonegotiation
+ * @ndev: a pointer to a &struct net_device for the MAC.
+ */
+void mac_an_restart(struct net_device *ndev);
+
+/**
+ * mac_link_down() - take the link down
+ * @ndev: a pointer to a &struct net_device for the MAC.
+ * @mode: link autonegotiation mode
+ *
+ * If @mode is not an in-band negotiation mode (as defined by
+ * phylink_autoneg_inband()), force the link down and disable any
+ * Energy Efficient Ethernet MAC configuration.
+ */
+void mac_link_down(struct net_device *ndev, unsigned int mode);
+
+/**
+ * mac_link_up() - allow the link to come up
+ * @ndev: a pointer to a &struct net_device for the MAC.
+ * @mode: link autonegotiation mode
+ * @phy: any attached phy
+ *
+ * If @mode is not an in-band negotiation mode (as defined by
+ * phylink_autoneg_inband()), allow the link to come up. If @phy
+ * is non-%NULL, configure Energy Efficient Ethernet by calling
+ * phy_init_eee() and perform appropriate MAC configuration for EEE.
+ */
+void mac_link_up(struct net_device *ndev, unsigned int mode,
+ struct phy_device *phy);
+#endif
+
struct phylink *phylink_create(struct net_device *, struct device_node *,
phy_interface_t iface, const struct phylink_mac_ops *ops);
void phylink_destroy(struct phylink *);
projects / openwrt / staging / blogic.git / commitdiff