compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
};
};
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
- status = "okay";
-};
-
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
bias-pull-up;
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
/* TODO: Camera, touchscreen, etc. */
};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
- status = "okay";
-};
-
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
compatible = "pine64,pine64", "allwinner,sun50i-a64";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rmii_pins>;
- phy-mode = "rmii";
- phy-handle = <&ext_rmii_phy1>;
- status = "okay";
-
-};
-
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
bias-pull-up;
};
-&mdio {
- ext_rmii_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
"allwinner,sun50i-a64";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
- status = "okay";
-};
-
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
#size-cells = <0>;
};
- emac: ethernet@1c30000 {
- compatible = "allwinner,sun50i-a64-emac";
- syscon = <&syscon>;
- reg = <0x01c30000 0x10000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
-&mdio {
- ext_rgmii_phy: ethernet-phy@7 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <7>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
};
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;