Code unification.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
config RT2800PCI
tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)"
depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
+ select RT2800_LIB
select RT2X00_LIB_PCI if RT2800PCI_PCI
select RT2X00_LIB_SOC if RT2800PCI_SOC
select RT2X00_LIB_HT
config RT2800USB
tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
+ select RT2800_LIB
select RT2X00_LIB_USB
select RT2X00_LIB_HT
select RT2X00_LIB_FIRMWARE
When compiled as a module, this driver will be called "rt2800usb.ko".
+config RT2800_LIB
+ tristate
+
config RT2X00_LIB_PCI
tristate
select RT2X00_LIB
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o
obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
+obj-$(CONFIG_RT2800_LIB) += rt2800lib.o
obj-$(CONFIG_RT2400PCI) += rt2400pci.o
obj-$(CONFIG_RT2500PCI) += rt2500pci.o
obj-$(CONFIG_RT61PCI) += rt61pci.o
--- /dev/null
+/*
+ Copyright (C) 2009 Bartlomiej Zolnierkiewicz
+
+ Based on the original rt2800pci.c and rt2800usb.c:
+
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2800lib
+ Abstract: rt2800 generic device routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2800lib.h"
+#include "rt2800.h"
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("rt2800 library");
+MODULE_LICENSE("GPL");
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2800_register_read and rt2800_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ * The _lock versions must be used if you already hold the csr_mutex
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+ rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+ rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+ rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+ rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+ H2M_MAILBOX_CSR_OWNER, (__reg))
+
+void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
+ reg = 0;
+ rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
+ if (rt2x00_intf_is_pci(rt2x00dev))
+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+ rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_bbp_write);
+
+void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
+ */
+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
+ reg = 0;
+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
+ if (rt2x00_intf_is_pci(rt2x00dev))
+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+ rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+ WAIT_FOR_BBP(rt2x00dev, ®);
+ }
+
+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_bbp_read);
+
+void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
+ reg = 0;
+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
+
+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_rfcsr_write);
+
+void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
+ reg = 0;
+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
+
+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+
+ WAIT_FOR_RFCSR(rt2x00dev, ®);
+ }
+
+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_rfcsr_read);
+
+void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RF becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RF(rt2x00dev, ®)) {
+ reg = 0;
+ rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
+ rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
+ rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
+ rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
+
+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
+ rt2x00_rf_write(rt2x00dev, word, value);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_rf_write);
+
+void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+ const u8 command, const u8 token,
+ const u8 arg0, const u8 arg1)
+{
+ u32 reg;
+
+ if (rt2x00_intf_is_pci(rt2x00dev)) {
+ /*
+ * RT2880 and RT3052 don't support MCU requests.
+ */
+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
+ rt2x00_rt(&rt2x00dev->chip, RT3052))
+ return;
+ }
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the MCU becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_MCU(rt2x00dev, ®)) {
+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
+ rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+ reg = 0;
+ rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
+ rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_mcu_request);
return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
}
+void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value);
+void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value);
+void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value);
+void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value);
+void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value);
+void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+ const u8 command, const u8 token,
+ const u8 arg0, const u8 arg1);
+
#endif /* RT2800LIB_H */
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-/*
- * Register access.
- * All access to the CSR registers will go through the methods
- * rt2800_register_read and rt2800_register_write.
- * BBP and RF register require indirect register access,
- * and use the CSR registers BBPCSR and RFCSR to achieve this.
- * These indirect registers work with busy bits,
- * and we will try maximal REGISTER_BUSY_COUNT times to access
- * the register while taking a REGISTER_BUSY_DELAY us delay
- * between each attampt. When the busy bit is still set at that time,
- * the access attempt is considered to have failed,
- * and we will print an error.
- * The _lock versions must be used if you already hold the csr_mutex
- */
-#define WAIT_FOR_BBP(__dev, __reg) \
- rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RFCSR(__dev, __reg) \
- rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RF(__dev, __reg) \
- rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-#define WAIT_FOR_MCU(__dev, __reg) \
- rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
- H2M_MAILBOX_CSR_OWNER, (__reg))
-
-static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the BBP becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_BBP(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
- rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
- rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
- if (rt2x00_intf_is_pci(rt2x00dev))
- rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
-
- rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the BBP becomes available, afterwards we
- * can safely write the read request into the register.
- * After the data has been written, we wait until hardware
- * returns the correct value, if at any time the register
- * doesn't become available in time, reg will be 0xffffffff
- * which means we return 0xff to the caller.
- */
- if (WAIT_FOR_BBP(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
- rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
- if (rt2x00_intf_is_pci(rt2x00dev))
- rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
-
- rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-
- WAIT_FOR_BBP(rt2x00dev, ®);
- }
-
- *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- rt2800pci_bbp_write(rt2x00dev, word, value);
-}
-
-static inline void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- rt2800pci_bbp_read(rt2x00dev, word, value);
-}
-
-static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the RFCSR becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-
- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the RFCSR becomes available, afterwards we
- * can safely write the read request into the register.
- * After the data has been written, we wait until hardware
- * returns the correct value, if at any time the register
- * doesn't become available in time, reg will be 0xffffffff
- * which means we return 0xff to the caller.
- */
- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-
- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-
- WAIT_FOR_RFCSR(rt2x00dev, ®);
- }
-
- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- rt2800pci_rfcsr_write(rt2x00dev, word, value);
-}
-
-static inline void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- rt2800pci_rfcsr_read(rt2x00dev, word, value);
-}
-
-static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u32 value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the RF becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_RF(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
- rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
- rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
- rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
-
- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
- rt2x00_rf_write(rt2x00dev, word, value);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u32 value)
-{
- rt2800pci_rf_write(rt2x00dev, word, value);
-}
-
-static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
- const u8 command, const u8 token,
- const u8 arg0, const u8 arg1)
-{
- u32 reg;
-
- if (rt2x00_intf_is_pci(rt2x00dev)) {
- /*
- * RT2880 and RT3052 don't support MCU requests.
- */
- if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
- rt2x00_rt(&rt2x00dev->chip, RT3052))
- return;
- }
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the MCU becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_MCU(rt2x00dev, ®)) {
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
- rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
-
- reg = 0;
- rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
- rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
- const u8 command, const u8 token,
- const u8 arg0, const u8 arg1)
-{
- rt2800pci_mcu_request(rt2x00dev, command, token, arg0, arg1);
-}
-
static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
{
unsigned int i;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-/*
- * Register access.
- * All access to the CSR registers will go through the methods
- * rt2800_register_read and rt2800_register_write.
- * BBP and RF register require indirect register access,
- * and use the CSR registers BBPCSR and RFCSR to achieve this.
- * These indirect registers work with busy bits,
- * and we will try maximal REGISTER_BUSY_COUNT times to access
- * the register while taking a REGISTER_BUSY_DELAY us delay
- * between each attampt. When the busy bit is still set at that time,
- * the access attempt is considered to have failed,
- * and we will print an error.
- * The _lock versions must be used if you already hold the csr_mutex
- */
-#define WAIT_FOR_BBP(__dev, __reg) \
- rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RFCSR(__dev, __reg) \
- rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RF(__dev, __reg) \
- rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-#define WAIT_FOR_MCU(__dev, __reg) \
- rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
- H2M_MAILBOX_CSR_OWNER, (__reg))
-
-static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the BBP becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_BBP(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
- rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
- rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
-
- rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the BBP becomes available, afterwards we
- * can safely write the read request into the register.
- * After the data has been written, we wait until hardware
- * returns the correct value, if at any time the register
- * doesn't become available in time, reg will be 0xffffffff
- * which means we return 0xff to the caller.
- */
- if (WAIT_FOR_BBP(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
- rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
-
- rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-
- WAIT_FOR_BBP(rt2x00dev, ®);
- }
-
- *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- rt2800usb_bbp_write(rt2x00dev, word, value);
-}
-
-static inline void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- rt2800usb_bbp_read(rt2x00dev, word, value);
-}
-
-static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the RFCSR becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-
- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the RFCSR becomes available, afterwards we
- * can safely write the read request into the register.
- * After the data has been written, we wait until hardware
- * returns the correct value, if at any time the register
- * doesn't become available in time, reg will be 0xffffffff
- * which means we return 0xff to the caller.
- */
- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-
- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-
- WAIT_FOR_RFCSR(rt2x00dev, ®);
- }
-
- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-{
- rt2800usb_rfcsr_write(rt2x00dev, word, value);
-}
-
-static inline void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
-{
- rt2800usb_rfcsr_read(rt2x00dev, word, value);
-}
-
-static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u32 value)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the RF becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_RF(rt2x00dev, ®)) {
- reg = 0;
- rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
- rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
- rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
- rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
-
- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
- rt2x00_rf_write(rt2x00dev, word, value);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u32 value)
-{
- rt2800usb_rf_write(rt2x00dev, word, value);
-}
-
-static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
- const u8 command, const u8 token,
- const u8 arg0, const u8 arg1)
-{
- u32 reg;
-
- mutex_lock(&rt2x00dev->csr_mutex);
-
- /*
- * Wait until the MCU becomes available, afterwards we
- * can safely write the new data into the register.
- */
- if (WAIT_FOR_MCU(rt2x00dev, ®)) {
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
- rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
- rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
-
- reg = 0;
- rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
- rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static inline void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
- const u8 command, const u8 token,
- const u8 arg0, const u8 arg1)
-{
- rt2800usb_mcu_request(rt2x00dev, command, token, arg0, arg1);
-}
-
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
static const struct rt2x00debug rt2800usb_rt2x00debug = {
.owner = THIS_MODULE,
projects / openwrt / staging / blogic.git / commitdiff