ARM: S3C64XX: Configure backup battery charger on Cragganmore

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 474f0d27e979c50b08295120501f66324d5324c2..9026249233adeb1bcabcb1e3f1b6eb7faf82f265 100644 (file)
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -474,6 +474,12 @@ static struct regulator_init_data vddalive __initdata = {
        .supply_regulator = "WALLVDD",
 };
 
+static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+       .charger_enable = 1,
+       .vlim = 2500,  /* mV */
+       .ilim = 200,   /* uA */
+};
+
 static struct wm831x_status_pdata banff_red_led __initdata = {
        .name = "banff:red:",
        .default_src = WM831X_STATUS_MANUAL,
@@ -494,6 +500,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
        .irq_base = BANFF_PMIC_IRQ_BASE,
        .gpio_base = GPIO_BOARD_START + 8,
 
+       .backup = &banff_backup_pdata,
+
        .gpio_defaults = {
                /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
                [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,