ath79: add support for TP-Link TL-WA1201 v2

This device is a wireless access point working on the 2.4 GHz and 5 GHz
band, based on Qualcomm/Atheros QCA9563 + QCA9886.

Specification
- 775 MHz CPU
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- QCA9563: 2.4 GHz 3x3
- QCA9886: 5 GHz
- AR8033: 1x 1 Gbs Ethernet
- 4x LED, WPS factory reset and power button
- bare UART on PCB (accessible through testpoints)

Methods for Flashing:
- Apply factory image in OEM firmware web-gui. Wait a minute after the
  progress bar completes and restart the device.
- Sysupgrade on top of existing OpenWRT image
- Solder wires onto UART testpoints and attach a terminal.
  Boot the device and press enter to enter u-boot's menu. Then issue the
  following commands
  1. setenv serverip your-server-ip
     setenv ipaddr your-device-ip
  2. tftp 0x80060000 openwrt-squashfs.bin (Rembember output of size in
    hex, henceforth "sizeinhex")
  3. erase 0x9f030000 +"sizeinhex"
  4. cp.b 0x80060000 0x9f030000 0x"sizeinhex"
  5. reboot

Recover:
- U-boot serial console

Signed-off-by: Robert Balas <balasr@iis.ee.ethz.ch>
[convert to nvmem]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index bd4d4b562ec774ef9341dc0e11323b0ac696066b..597c48b9d4f48b26ef3a79d0ee2b4ef2de42e57d 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -1619,6 +1619,48 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "file-system"
        },
 
+       /** Firmware layout for the TL-WA1201 v2 */
+       {
+               .id     = "TL-WA1201-V2",
+               .vendor = "",
+               .support_list =
+                       "SupportList:\n"
+                       "{product_name:TL-WA1201,product_ver:2.0.0,special_id:45550000}\n"
+                       "{product_name:TL-WA1201,product_ver:2.0.0,special_id:55530000}\n",
+               .part_trail = 0x00,
+               .soft_ver = "soft_ver:1.0.1 Build 20200709 rel.66244\n",
+
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"default-mac", 0x20000, 0x00200},
+                       {"pin", 0x20200, 0x00100},
+                       {"product-info", 0x20300, 0x00200},
+                       {"device-id", 0x20500, 0x0fb00},
+                       {"firmware", 0x30000, 0xce0000},
+                       {"portal-logo", 0xd10000, 0x20000},
+                       {"portal-back", 0xd30000, 0x200000},
+                       {"soft-version", 0xf30000, 0x00200},
+                       {"extra-para", 0xf30200, 0x00200},
+                       {"support-list", 0xf30400, 0x00200},
+                       {"profile", 0xf30600, 0x0fa00},
+                       {"apdef-config", 0xf40000, 0x10000},
+                       {"ap-config", 0xf50000, 0x10000},
+                       {"redef-config", 0xf60000, 0x10000},
+                       {"re-config", 0xf70000, 0x10000},
+                       {"multidef-config", 0xf80000, 0x10000},
+                       {"multi-config", 0xf90000, 0x10000},
+                       {"clientdef-config", 0xfa0000, 0x10000},
+                       {"client-config", 0xfb0000, 0x10000},
+                       {"partition-table", 0xfc0000, 0x10000},
+                       {"user-config", 0xfd0000, 0x10000},
+                       {"certificate", 0xfe0000, 0x10000},
+                       {"radio", 0xff0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "file-system",
+       },
+
        /** Firmware layout for the TL-WA850RE v2 */
        {
                .id     = "TLWA850REV2",
@@ -2995,7 +3037,8 @@ static void build_image(const char *output,
                const uint8_t extra_para[2] = {0x01, 0x00};
                parts[5] = make_extra_para(info, extra_para,
                        sizeof(extra_para));
-       } else if (strcasecmp(info->id, "ARCHER-C6-V2") == 0) {
+       } else if (strcasecmp(info->id, "ARCHER-C6-V2") == 0 ||
+                  strcasecmp(info->id, "TL-WA1201-V2") == 0) {
                const uint8_t extra_para[2] = {0x00, 0x01};
                parts[5] = make_extra_para(info, extra_para,
                        sizeof(extra_para));