net: phy: rtl8211: fix interrupt on status link change

This is to fix a problem in the rtl8211 where the driver
wasn't properly enabled the interrupt on link change status.
it has to enable the ineterrupt on the bit 10 in the register 18
(INER).

Reported-by: Sharma Bhupesh <B45370@freescale.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 8e7af8354342c9ce6440e3131aad536fbe385c87..138de837977f1e5762ecb8ae6fecac59ade8c181 100644 (file)
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -23,7 +23,7 @@
 #define RTL821x_INER_INIT      0x6400
 #define RTL821x_INSR           0x13
 
-#define        RTL8211E_INER_LINK_STAT 0x10
+#define        RTL8211E_INER_LINK_STATUS       0x400
 
 MODULE_DESCRIPTION("Realtek PHY driver");
 MODULE_AUTHOR("Johnson Leung");
@@ -57,7 +57,7 @@ static int rtl8211e_config_intr(struct phy_device *phydev)
 
        if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
                err = phy_write(phydev, RTL821x_INER,
-                               RTL8211E_INER_LINK_STAT);
+                               RTL8211E_INER_LINK_STATUS);
        else
                err = phy_write(phydev, RTL821x_INER, 0);