ALSA: hda/hdmi - Read the pin sense from register when repolling

The driver will check the monitor presence when resuming from suspend,
starting poll or interrupt triggers. In these 3 situations, the
jack_dirty will be set to 1 first, then the hda_jack.c reads the
pin_sense from register, after reading the register, the jack_dirty
will be set to 0. But hdmi_repoll_work() is enabled in these 3
situations, It will read the pin_sense a couple of times subsequently,
since the jack_dirty is 0 now, It does not read the register anymore,
instead it uses the shadow pin_sense which is read at the first time.

It is meaningless to check the shadow pin_sense a couple of times,
we need to read the register to check the real plugging state, so
we set the jack_dirty to 1 in the hdmi_repoll_work().

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 8b3ac690efa368bb0929c06f0085b46635ed5a0a..380001d6e797f9bb19ddafb8f67f0c5e550146ab 100644 (file)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1663,6 +1663,11 @@ static void hdmi_repoll_eld(struct work_struct *work)
        container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
        struct hda_codec *codec = per_pin->codec;
        struct hdmi_spec *spec = codec->spec;
+       struct hda_jack_tbl *jack;
+
+       jack = snd_hda_jack_tbl_get(codec, per_pin->pin_nid);
+       if (jack)
+               jack->jack_dirty = 1;
 
        if (per_pin->repoll_count++ > 6)
                per_pin->repoll_count = 0;