ARM: shmobile: henninger: add VIN0/ADV7180 DT support

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index 3a2ef0a2a137f8d49754c28b2bb95ba9bb2fb225..f1b56de10205f14bdcd829900368c31dae067a39 100644 (file)
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@
                renesas,groups = "usb1";
                renesas,function = "usb1";
        };
+
+       vin0_pins: vin0 {
+               renesas,groups = "vin0_data8", "vin0_clk";
+               renesas,function = "vin0";
+       };
 };
 
 &scif0 {
@@ -191,6 +196,19 @@
 
        status = "okay";
        clock-frequency = <400000>;
+
+       composite-in@20 {
+               compatible = "adi,adv7180";
+               reg = <0x20>;
+               remote = <&vin0>;
+
+               port {
+                       adv7180: endpoint {
+                               bus-width = <8>;
+                               remote-endpoint = <&vin0ep>;
+                       };
+               };
+       };
 };
 
 &qspi {
@@ -260,3 +278,20 @@
 &pciec {
        status = "okay";
 };
+
+/* composite video input */
+&vin0 {
+       status = "ok";
+       pinctrl-0 = <&vin0_pins>;
+       pinctrl-names = "default";
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin0ep: endpoint {
+                       remote-endpoint = <&adv7180>;
+                       bus-width = <8>;
+               };
+       };
+};