iwlwifi: configure the LTR

The LTR is the handshake between the device and the root
complex about the latency allowed when the bus exits power
save. This configuration was missing and this led to high
latency in the link power up. The end user could experience
high latency in the network because of this.

Cc: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 9eb85249e89c46aa980ae22893b48af2150ee4df..d8fc548c0d6cd561993eebb6df185e3ccad0d6ac 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -563,6 +563,7 @@ enum iwl_trans_state {
  *     Set during transport allocation.
  * @hw_id_str: a string with info about HW ID. Set during transport allocation.
  * @pm_support: set to true in start_hw if link pm is supported
+ * @ltr_enabled: set to true if the LTR is enabled
  * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
  *     The user should use iwl_trans_{alloc,free}_tx_cmd.
  * @dev_cmd_headroom: room needed for the transport's private use before the
@@ -589,6 +590,7 @@ struct iwl_trans {
        u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
 
        bool pm_support;
+       bool ltr_enabled;
 
        /* The following fields are internal only */
        struct kmem_cache *dev_cmd_pool;

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
index 27dd86395b39dd0f5800efe9c73a52294a2099ed..2fd8ad4633e0ee717096461398c96fc67181d288 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
@@ -68,13 +68,46 @@
 
 /* Power Management Commands, Responses, Notifications */
 
+/**
+ * enum iwl_ltr_config_flags - masks for LTR config command flags
+ * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
+ * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
+ *     memory access
+ * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
+ *     reg change
+ * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
+ *     D0 to D3
+ * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
+ * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
+ * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
+ */
+enum iwl_ltr_config_flags {
+       LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0),
+       LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1),
+       LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2),
+       LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3),
+       LTR_CFG_FLAG_SW_SET_SHORT = BIT(4),
+       LTR_CFG_FLAG_SW_SET_LONG = BIT(5),
+       LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6),
+};
+
+/**
+ * struct iwl_ltr_config_cmd - configures the LTR
+ * @flags: See %enum iwl_ltr_config_flags
+ */
+struct iwl_ltr_config_cmd {
+       __le32 flags;
+       __le32 static_long;
+       __le32 static_short;
+} __packed;
+
 /* Radio LP RX Energy Threshold measured in dBm */
 #define POWER_LPRX_RSSI_THRESHOLD      75
 #define POWER_LPRX_RSSI_THRESHOLD_MAX  94
 #define POWER_LPRX_RSSI_THRESHOLD_MIN  30
 
 /**
- * enum iwl_scan_flags - masks for power table command flags
+ * enum iwl_power_flags - masks for power table command flags
  * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
  *             receiver and transmitter. '0' - does not allow.
  * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 667a92274c87773c1d123b41911afb5e38d19405..c62575d86bcdbe5e75c724cacf8605e8569309e6 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -157,6 +157,7 @@ enum {
        /* Power - legacy power table command */
        POWER_TABLE_CMD = 0x77,
        PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
+       LTR_CONFIG = 0xee,
 
        /* Thermal Throttling*/
        REPLY_THERMAL_MNG_BACKOFF = 0x7e,

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 23fd711a67e456055b50d171ec243a124ca3ce6c..e0d9f19650b07e5df8b56342ec5e6d1bef88194f 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -480,6 +480,15 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
        /* Initialize tx backoffs to the minimal possible */
        iwl_mvm_tt_tx_backoff(mvm, 0);
 
+       if (mvm->trans->ltr_enabled) {
+               struct iwl_ltr_config_cmd cmd = {
+                       .flags = cpu_to_le32(LTR_CFG_FLAG_FEATURE_ENABLE),
+               };
+
+               WARN_ON(iwl_mvm_send_cmd_pdu(mvm, LTR_CONFIG, 0,
+                                            sizeof(cmd), &cmd));
+       }
+
        ret = iwl_mvm_power_update_device(mvm);
        if (ret)
                goto error;

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 15aa298ee79c749b5e7e7e7401d92375a270c29e..48cb25a93591a44678fd051e390dc15c02078744 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -336,6 +336,7 @@ static const char *const iwl_mvm_cmd_strings[REPLY_MAX] = {
        CMD(DTS_MEASUREMENT_NOTIFICATION),
        CMD(REPLY_THERMAL_MNG_BACKOFF),
        CMD(MAC_PM_POWER_TABLE),
+       CMD(LTR_CONFIG),
        CMD(BT_COEX_CI),
        CMD(BT_COEX_UPDATE_SW_BOOST),
        CMD(BT_COEX_UPDATE_CORUN_LUT),

diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 1393bac0025c59de0b24b1453eb7932bebda1b22..c706dba67cdd873dd10948718059f31ca08efd5b 100644 (file)
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -174,6 +174,7 @@ static void iwl_pcie_apm_config(struct iwl_trans *trans)
 {
        struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
        u16 lctl;
+       u16 cap;
 
        /*
         * HW bug W/A for instability in PCIe bus L0S->L1 transition.
@@ -184,16 +185,17 @@ static void iwl_pcie_apm_config(struct iwl_trans *trans)
         *    power savings, even without L1.
         */
        pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_LNKCTL, &lctl);
-       if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
-               /* L1-ASPM enabled; disable(!) L0S */
+       if (lctl & PCI_EXP_LNKCTL_ASPM_L1)
                iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-               dev_info(trans->dev, "L1 Enabled; Disabling L0S\n");
-       } else {
-               /* L1-ASPM disabled; enable(!) L0S */
+       else
                iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-               dev_info(trans->dev, "L1 Disabled; Enabling L0S\n");
-       }
        trans->pm_support = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S);
+
+       pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_DEVCTL2, &cap);
+       trans->ltr_enabled = cap & PCI_EXP_DEVCTL2_LTR_EN;
+       dev_info(trans->dev, "L1 %sabled - LTR %sabled\n",
+                (lctl & PCI_EXP_LNKCTL_ASPM_L1) ? "En" : "Dis",
+                trans->ltr_enabled ? "En" : "Dis");
 }
 
 /*