return -ENOMEM;
/*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
*/
- phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+ /* Initialize the host templates the configured values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+ /* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */
if (phba->cfg_enable_bg) {
- phba->cfg_sg_seg_cnt = LPFC_MAX_BPL_SEG_CNT;
- phba->cfg_sg_dma_buf_size +=
- phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
+ /*
+ * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
+ * the FCP rsp, and a BDE for each. Sice we have no control
+ * over how many protection data segments the SCSI Layer
+ * will hand us (ie: there could be one for every block
+ * in the IO), we just allocate enough BDEs to accomidate
+ * our max amount and we need to limit lpfc_sg_seg_cnt to
+ * minimize the risk of running out.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ (LPFC_MAX_SG_SEG_CNT * sizeof(struct ulp_bde64));
+
+ if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF)
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF;
+
+ /* Total BDEs in BPL for scsi_sg_list and scsi_sg_prot_list */
+ phba->cfg_total_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+ } else {
+ /*
+ * The scsi_buf for a regular I/O will hold the FCP cmnd,
+ * the FCP rsp, a BDE for each, and a BDE for up to
+ * cfg_sg_seg_cnt data segments.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+ /* Total BDEs in BPL for scsi_sg_list */
+ phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
}
- /* Also reinitialize the host templates with new values. */
- lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
- lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
+ "9088 sg_tablesize:%d dmabuf_size:%d total_bde:%d\n",
+ phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
+ phba->cfg_total_seg_cnt);
phba->max_vpi = LPFC_MAX_VPI;
/* This will be set to correct value after config_port mbox */
{
struct lpfc_sli *psli;
LPFC_MBOXQ_t *mboxq;
- int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
+ int rc, i, hbq_count, max_buf_size;
uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
struct lpfc_mqe *mqe;
int longs;
- int sges_per_segment;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
- /* With BlockGuard we can have multiple SGEs per Data Segemnt */
- sges_per_segment = 1;
- if (phba->cfg_enable_bg)
- sges_per_segment = 2;
-
/*
* For SLI4, instead of using ring 0 (LPFC_FCP_RING) for FCP commands
* we will associate a new ring, for each FCP fastpath EQ/CQ/WQ tuple.
max_buf_size = (2 * SLI4_PAGE_SIZE);
if (phba->cfg_sg_seg_cnt > LPFC_MAX_SGL_SEG_CNT - 2)
phba->cfg_sg_seg_cnt = LPFC_MAX_SGL_SEG_CNT - 2;
- max_buf_size += (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
/*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
- * To insure that the scsi sgl does not cross a 4k page boundary only
- * sgl sizes of must be a power of 2.
*/
- buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
- (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) *
- sizeof(struct sli4_sge)));
-
- for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
- dma_buf_size < max_buf_size && buf_size > dma_buf_size;
- dma_buf_size = dma_buf_size << 1)
- ;
- if (dma_buf_size == max_buf_size)
- phba->cfg_sg_seg_cnt = (dma_buf_size -
- sizeof(struct fcp_cmnd) - sizeof(struct fcp_rsp) -
- (2 * sizeof(struct sli4_sge))) /
- sizeof(struct sli4_sge);
- phba->cfg_sg_dma_buf_size = dma_buf_size;
+
+ if (phba->cfg_enable_bg) {
+ /*
+ * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
+ * the FCP rsp, and a SGE for each. Sice we have no control
+ * over how many protection data segments the SCSI Layer
+ * will hand us (ie: there could be one for every block
+ * in the IO), we just allocate enough SGEs to accomidate
+ * our max amount and we need to limit lpfc_sg_seg_cnt to
+ * minimize the risk of running out.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) + max_buf_size;
+
+ /* Total SGEs for scsi_sg_list and scsi_sg_prot_list */
+ phba->cfg_total_seg_cnt = LPFC_MAX_SGL_SEG_CNT;
+
+ if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SLI4_SEG_CNT_DIF)
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SLI4_SEG_CNT_DIF;
+ } else {
+ /*
+ * The scsi_buf for a regular I/O will hold the FCP cmnd,
+ * the FCP rsp, a SGE for each, and a SGE for up to
+ * cfg_sg_seg_cnt data segments.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+ /* Total SGEs for scsi_sg_list */
+ phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
+ /*
+ * NOTE: if (phba->cfg_sg_seg_cnt + 2) <= 256 we only need
+ * to post 1 page for the SGL.
+ */
+ }
+
+ /* Initialize the host templates with the updated values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+ if (phba->cfg_sg_dma_buf_size <= LPFC_MIN_SG_SLI4_BUF_SZ)
+ phba->cfg_sg_dma_buf_size = LPFC_MIN_SG_SLI4_BUF_SZ;
+ else
+ phba->cfg_sg_dma_buf_size =
+ SLI4_PAGE_ALIGN(phba->cfg_sg_dma_buf_size);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
+ "9087 sg_tablesize:%d dmabuf_size:%d total_sge:%d\n",
+ phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
+ phba->cfg_total_seg_cnt);
/* Initialize buffer queue management fields */
hbq_count = lpfc_sli_hbq_count();
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl;
uint16_t iotag;
- int bcnt;
+ int bcnt, bpl_size;
+
+ bpl_size = phba->cfg_sg_dma_buf_size -
+ (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
+ num_to_alloc, phba->cfg_sg_dma_buf_size,
+ (int)sizeof(struct fcp_cmnd),
+ (int)sizeof(struct fcp_rsp), bpl_size);
for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
struct list_head *post_sblist, int sb_count)
{
struct lpfc_scsi_buf *psb, *psb_next;
- int status;
+ int status, sgl_size;
int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
dma_addr_t pdma_phys_bpl1;
int last_xritag = NO_XRI;
if (sb_count <= 0)
return -EINVAL;
+ sgl_size = phba->cfg_sg_dma_buf_size -
+ (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+
list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
list_del_init(&psb->list);
block_cnt++;
post_cnt = block_cnt;
} else if (block_cnt == 1) {
/* last single sgl with non-contiguous xri */
- if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ if (sgl_size > SGL_PAGE_SIZE)
pdma_phys_bpl1 = psb->dma_phys_bpl +
SGL_PAGE_SIZE;
else
IOCB_t *iocb;
dma_addr_t pdma_phys_fcp_cmd;
dma_addr_t pdma_phys_fcp_rsp;
- dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+ dma_addr_t pdma_phys_bpl;
uint16_t iotag, lxri = 0;
- int bcnt, num_posted;
+ int bcnt, num_posted, sgl_size;
LIST_HEAD(prep_sblist);
LIST_HEAD(post_sblist);
LIST_HEAD(scsi_sblist);
+ sgl_size = phba->cfg_sg_dma_buf_size -
+ (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
+ num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size,
+ (int)sizeof(struct fcp_cmnd),
+ (int)sizeof(struct fcp_rsp));
+
for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
if (!psb)
}
memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+ /* Page alignment is CRITICAL, double check to be sure */
+ if (((unsigned long)(psb->data) &
+ (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+
/* Allocate iotag for psb->cur_iocbq. */
iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
if (iotag == 0) {
psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
psb->fcp_bpl = psb->data;
- psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
- - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ psb->fcp_cmnd = (psb->data + sgl_size);
psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
sizeof(struct fcp_cmnd));
/* Initialize local short-hand pointers. */
sgl = (struct sli4_sge *)psb->fcp_bpl;
pdma_phys_bpl = psb->dma_handle;
- pdma_phys_fcp_cmd =
- (psb->dma_handle + phba->cfg_sg_dma_buf_size)
- - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size);
pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
/*
iocb->ulpLe = 1;
iocb->ulpClass = CLASS3;
psb->cur_iocbq.context1 = psb;
- if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
- pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
- else
- pdma_phys_bpl1 = 0;
psb->dma_phys_bpl = pdma_phys_bpl;
/* add the scsi buffer to a post list */
"dma_map_sg. Config %d, seg_cnt %d\n",
__func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
+ lpfc_cmd->seg_cnt = 0;
scsi_dma_unmap(scsi_cmnd);
return 1;
}
split_offset = 0;
do {
+ /* Check to see if we ran out of space */
+ if (num_bde >= (phba->cfg_total_seg_cnt - 2))
+ return num_bde + 3;
+
/* setup PDE5 with what we have */
pde5 = (struct lpfc_pde5 *) bpl;
memset(pde5, 0, sizeof(struct lpfc_pde5));
pgdone = 0;
subtotal = 0; /* total bytes processed for current prot grp */
while (!pgdone) {
+ /* Check to see if we ran out of space */
+ if (num_bde >= phba->cfg_total_seg_cnt)
+ return num_bde + 1;
+
if (!sgde) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9065 BLKGRD:%s Invalid data segment\n",
split_offset = 0;
do {
+ /* Check to see if we ran out of space */
+ if (num_sge >= (phba->cfg_total_seg_cnt - 2))
+ return num_sge + 3;
+
/* setup DISEED with what we have */
diseed = (struct sli4_sge_diseed *) sgl;
memset(diseed, 0, sizeof(struct sli4_sge_diseed));
pgdone = 0;
subtotal = 0; /* total bytes processed for current prot grp */
while (!pgdone) {
+ /* Check to see if we ran out of space */
+ if (num_sge >= phba->cfg_total_seg_cnt)
+ return num_sge + 1;
+
if (!sgde) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9086 BLKGRD:%s Invalid data segment\n",
return 1;
lpfc_cmd->seg_cnt = datasegcnt;
- if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9067 BLKGRD: %s: Too many sg segments"
- " from dma_map_sg. Config %d, seg_cnt"
- " %d\n",
- __func__, phba->cfg_sg_seg_cnt,
- lpfc_cmd->seg_cnt);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+
+ /* First check if data segment count from SCSI Layer is good */
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
+ goto err;
prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
switch (prot_group_type) {
case LPFC_PG_TYPE_NO_DIF:
+
+ /* Here we need to add a PDE5 and PDE6 to the count */
+ if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt)
+ goto err;
+
num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
datasegcnt);
/* we should have 2 or more entries in buffer list */
if (num_bde < 2)
goto err;
break;
- case LPFC_PG_TYPE_DIF_BUF:{
+
+ case LPFC_PG_TYPE_DIF_BUF:
/*
* This type indicates that protection buffers are
* passed to the driver, so that needs to be prepared
}
lpfc_cmd->prot_seg_cnt = protsegcnt;
- if (lpfc_cmd->prot_seg_cnt
- > phba->cfg_prot_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9068 BLKGRD: %s: Too many prot sg "
- "segments from dma_map_sg. Config %d,"
- "prot_seg_cnt %d\n", __func__,
- phba->cfg_prot_sg_seg_cnt,
- lpfc_cmd->prot_seg_cnt);
- dma_unmap_sg(&phba->pcidev->dev,
- scsi_prot_sglist(scsi_cmnd),
- scsi_prot_sg_count(scsi_cmnd),
- datadir);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+
+ /*
+ * There is a minimun of 4 BPLs used for every
+ * protection data segment.
+ */
+ if ((lpfc_cmd->prot_seg_cnt * 4) >
+ (phba->cfg_total_seg_cnt - 2))
+ goto err;
num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
datasegcnt, protsegcnt);
/* we should have 3 or more entries in buffer list */
- if (num_bde < 3)
+ if ((num_bde < 3) ||
+ (num_bde > phba->cfg_total_seg_cnt))
goto err;
break;
- }
+
case LPFC_PG_TYPE_INVALID:
default:
+ scsi_dma_unmap(scsi_cmnd);
+ lpfc_cmd->seg_cnt = 0;
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"9022 Unexpected protection group %i\n",
prot_group_type);
return 0;
err:
+ if (lpfc_cmd->seg_cnt)
+ scsi_dma_unmap(scsi_cmnd);
+ if (lpfc_cmd->prot_seg_cnt)
+ dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd),
+ scsi_cmnd->sc_data_direction);
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "9023 Could not setup all needed BDE's"
- "prot_group_type=%d, num_bde=%d\n",
+ "9023 Cannot setup S/G List for HBA"
+ "IO segs %d/%d BPL %d SCSI %d: %d %d\n",
+ lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
+ phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
prot_group_type, num_bde);
+
+ lpfc_cmd->seg_cnt = 0;
+ lpfc_cmd->prot_seg_cnt = 0;
return 1;
}
"dma_map_sg. Config %d, seg_cnt %d\n",
__func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
+ lpfc_cmd->seg_cnt = 0;
scsi_dma_unmap(scsi_cmnd);
return 1;
}
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
- uint32_t num_bde = 0;
+ uint32_t num_sge = 0;
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
int prot_group_type = 0;
int fcpdl;
/*
* Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
- * fcp_rsp regions to the first data bde entry
+ * fcp_rsp regions to the first data sge entry
*/
if (scsi_sg_count(scsi_cmnd)) {
/*
sgl += 1;
lpfc_cmd->seg_cnt = datasegcnt;
- if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9087 BLKGRD: %s: Too many sg segments"
- " from dma_map_sg. Config %d, seg_cnt"
- " %d\n",
- __func__, phba->cfg_sg_seg_cnt,
- lpfc_cmd->seg_cnt);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+
+ /* First check if data segment count from SCSI Layer is good */
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
+ goto err;
prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
switch (prot_group_type) {
case LPFC_PG_TYPE_NO_DIF:
- num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
+ /* Here we need to add a DISEED to the count */
+ if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt)
+ goto err;
+
+ num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
datasegcnt);
+
/* we should have 2 or more entries in buffer list */
- if (num_bde < 2)
+ if (num_sge < 2)
goto err;
break;
- case LPFC_PG_TYPE_DIF_BUF:{
+
+ case LPFC_PG_TYPE_DIF_BUF:
/*
* This type indicates that protection buffers are
* passed to the driver, so that needs to be prepared
}
lpfc_cmd->prot_seg_cnt = protsegcnt;
- if (lpfc_cmd->prot_seg_cnt
- > phba->cfg_prot_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9088 BLKGRD: %s: Too many prot sg "
- "segments from dma_map_sg. Config %d,"
- "prot_seg_cnt %d\n", __func__,
- phba->cfg_prot_sg_seg_cnt,
- lpfc_cmd->prot_seg_cnt);
- dma_unmap_sg(&phba->pcidev->dev,
- scsi_prot_sglist(scsi_cmnd),
- scsi_prot_sg_count(scsi_cmnd),
- datadir);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+ /*
+ * There is a minimun of 3 SGEs used for every
+ * protection data segment.
+ */
+ if ((lpfc_cmd->prot_seg_cnt * 3) >
+ (phba->cfg_total_seg_cnt - 2))
+ goto err;
- num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
+ num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
datasegcnt, protsegcnt);
+
/* we should have 3 or more entries in buffer list */
- if (num_bde < 3)
+ if ((num_sge < 3) ||
+ (num_sge > phba->cfg_total_seg_cnt))
goto err;
break;
- }
+
case LPFC_PG_TYPE_INVALID:
default:
+ scsi_dma_unmap(scsi_cmnd);
+ lpfc_cmd->seg_cnt = 0;
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"9083 Unexpected protection group %i\n",
prot_group_type);
return 0;
err:
+ if (lpfc_cmd->seg_cnt)
+ scsi_dma_unmap(scsi_cmnd);
+ if (lpfc_cmd->prot_seg_cnt)
+ dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd),
+ scsi_cmnd->sc_data_direction);
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "9084 Could not setup all needed BDE's"
- "prot_group_type=%d, num_bde=%d\n",
- prot_group_type, num_bde);
+ "9084 Cannot setup S/G List for HBA"
+ "IO segs %d/%d SGL %d SCSI %d: %d %d\n",
+ lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
+ phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
+ prot_group_type, num_sge);
+
+ lpfc_cmd->seg_cnt = 0;
+ lpfc_cmd->prot_seg_cnt = 0;
return 1;
}
}
num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
if (num_to_alloc != num_allocated) {
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
- "0708 Allocation request of %d "
- "command buffers did not succeed. "
- "Allocated %d buffers.\n",
- num_to_alloc, num_allocated);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0708 Allocation request of %d "
+ "command buffers did not succeed. "
+ "Allocated %d buffers.\n",
+ num_to_alloc, num_allocated);
}
if (num_allocated > 0)
phba->total_scsi_bufs += num_allocated;
projects / openwrt / staging / blogic.git / commitdiff