can: bcm: add documentation for CAN FD support

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index d58ff8467953a2da610891c921d750842f8c1806..aa15b9ee2e7000595d04df9f2faeae760cb27703 100644 (file)
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -31,6 +31,7 @@ This file contains
       4.2.4 Broadcast Manager message sequence transmission
       4.2.5 Broadcast Manager receive filter timers
       4.2.6 Broadcast Manager multiplex message receive filter
+      4.2.7 Broadcast Manager CAN FD support
     4.3 connected transport protocols (SOCK_SEQPACKET)
     4.4 unconnected transport protocols (SOCK_DGRAM)
 
@@ -799,7 +800,7 @@ solution for a couple of reasons:
     } mytxmsg;
 
     (..)
-    mytxmsg.nframes = 4;
+    mytxmsg.msg_head.nframes = 4;
     (..)
 
     write(s, &mytxmsg, sizeof(mytxmsg));
@@ -852,6 +853,28 @@ solution for a couple of reasons:
 
     write(s, &msg, sizeof(msg));
 
+  4.2.7 Broadcast Manager CAN FD support
+
+  The programming API of the CAN_BCM depends on struct can_frame which is
+  given as array directly behind the bcm_msg_head structure. To follow this
+  schema for the CAN FD frames a new flag 'CAN_FD_FRAME' in the bcm_msg_head
+  flags indicates that the concatenated CAN frame structures behind the
+  bcm_msg_head are defined as struct canfd_frame.
+
+    struct {
+            struct bcm_msg_head msg_head;
+            struct canfd_frame frame[5];
+    } msg;
+
+    msg.msg_head.opcode  = RX_SETUP;
+    msg.msg_head.can_id  = 0x42;
+    msg.msg_head.flags   = CAN_FD_FRAME;
+    msg.msg_head.nframes = 5;
+    (..)
+
+  When using CAN FD frames for multiplex filtering the MUX mask is still
+  expected in the first 64 bit of the struct canfd_frame data section.
+
   4.3 connected transport protocols (SOCK_SEQPACKET)
   4.4 unconnected transport protocols (SOCK_DGRAM)