Revert "ipq40xx: cambium wip"

This reverts commit e9842436bce5b6a86c66e089297eca5d8eb8880d.

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cnpilot-e410-a.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cnpilot-e410-a.dts
deleted file mode 100644 (file)
index 2fc9175..0000000
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cnpilot-e410-a.dts
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-       model = "Cambium Networks cnPilot e410 A";
-       compatible = "cambium,cnpilot-e410-a";
-
-       aliases {
-               label-mac-device = &gmac0;
-       };
-
-       soc {
-               rng@22000 {
-                       status = "okay";
-               };
-
-               mdio@90000 {
-                       status = "okay";
-               };
-
-               ess-psgmii@98000 {
-                       status = "okay";
-               };
-
-               tcsr@1949000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1949000 0x100>;
-                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-               };
-
-               tcsr@194b000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x194b000 0x100>;
-                       qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-               };
-
-               ess_tcsr@1953000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1953000 0x1000>;
-                       qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-               };
-
-               tcsr@1957000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1957000 0x100>;
-                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-               };
-
-               usb2@60f8800 {
-                       status = "okay";
-               };
-
-               usb3@8af8800 {
-                       status = "okay";
-               };
-
-               crypto@8e3a000 {
-                       status = "okay";
-               };
-
-               watchdog@b017000 {
-                       status = "okay";
-               };
-
-               ess-switch@c000000 {
-                       status = "okay";
-               };
-
-               edma@c080000 {
-                       status = "okay";
-               };
-       };
-};
-
-&tlmm {
-       serial_pins: serial_pinmux {
-               mux {
-                       pins = "gpio60", "gpio61";
-                       function = "blsp_uart0";
-                       bias-disable;
-               };
-       };
-
-       spi_0_pins: spi_0_pinmux {
-               mux {
-                       function = "blsp_spi0";
-                       pins = "gpio55", "gpio56", "gpio57";
-                       drive-strength = <12>;
-                       bias-disable;
-               };
-
-               mux_cs {
-                       function = "gpio";
-                       pins = "gpio54", "gpio59";
-                       drive-strength = <2>;
-                       bias-disable;
-                       output-high;
-               };
-       };
-};
-
-&cryptobam {
-       status = "okay";
-};
-
-&blsp_dma {
-       status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-       pinctrl-0 = <&spi_0_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <24000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition0@0 {
-                               label = "flash";
-                               reg = <0x0 0x2000000>;
-                               read-only;
-                       };
-               };
-       };
-
-       flash@1 {
-               compatible = "spi-nand";
-               reg = <1>;
-               spi-max-frequency = <24000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition0@0 {
-                               label = "flash";
-                               reg = <0x0 0x8000000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&blsp1_uart1 {
-       pinctrl-0 = <&serial_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&wifi0 {
-       status = "okay";
-};
-
-&wifi1 {
-       status = "okay";
-};

diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index be8ab08ce36a05ac40d0fc6cba419cc9eb88cb79..48514b88416275a05d831825a8a9eb2b4ef73c65 100644 (file)
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -343,15 +343,6 @@ endef
 # Missing DSA Setup
 #TARGET_DEVICES += cilab_meshpoint-one
 
-define Device/cambium_dnpilot-e410-a
-       $(call Device/FitImageLzma)
-       DEVICE_VENDOR := Cambium Networks
-       DEVICE_MODEL := cnPilot e410
-       DEVICE_VARIANT := A
-       SOC := qcom-ipq4018
-endef
-TARGET_DEVICES += cambium_dnpilot-e410-a
-
 define Device/compex_wpj419
        $(call Device/FitImage)
        $(call Device/UbiFit)